Choose style:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Kulbanski

Pages: [1] 2 3
Thanks to the team!
All good - even the Sun has spots on it. ))

Announcements / Re: ANNOUNCEMENT - Peppermint 7 Respin Released.
« on: December 01, 2016, 08:00:14 am »
I am a 70 year old..
You rule, man!  :o

Announcements / Re: ANNOUNCEMENT - Peppermint 7 Respin Released.
« on: November 30, 2016, 05:46:46 am »
Greets and thanks to the team, and community as well!
Already seedin` both 64 and 32-bit versions with up tp 100 Mbits.

Hardware / Re: Is TRIM enabled?
« on: September 04, 2016, 05:53:03 am »
Thanks a lot, Andy!
That was exactly what I needed. And yeah - TRIM is on.  :)

What are you running Peppermint on? / Re: Lenovo B40-30
« on: September 04, 2016, 02:40:01 am »
Thanks. Machine already does!  8)

Hardware / Is TRIM enabled?
« on: September 03, 2016, 04:16:54 pm »
Hello everyone and have a good daytime!
Googled around but... anyways: is there any simple command to get to know if TRIM is enabled (the drive: Kingston HyperX Fury SSD 240Gb MLC)?
Thanks in advance

What are you running Peppermint on? / Lenovo B40-30
« on: September 03, 2016, 04:07:13 pm »
Hello everyone and have a nice daytime!
Just put PPMINT 7even on this piece of hardware. SODIMM stick upgraded from 2 to 8 Gbs (two 4Gb Kingstons), and despite CPU isn`t that powerful - the Kingston HyperX Fury 240Gb SSD (MLC) nicely does it`s task 8).
Code: [Select]
mihails@lenovo ~ $ inxi -F
System:    Host: lenovo Kernel: 4.4.0-24-generic x86_64 (64 bit) Desktop: N/A
           Distro: Peppermint Seven
Machine:   System: LENOVO product: 80F1 v: Lenovo B40-30
           Mobo: LENOVO model: Lenovo B40-30 v: SDK0J33997 WIN
           Bios: LENOVO v: 9CCN35WW(V3.01) date: 10/16/2015
CPU:       Dual core Intel Celeron N2840 (-MCP-) cache: 1024 KB
           clock speeds: max: 2582 MHz 1: 1362 MHz 2: 1459 MHz
Graphics:  Card: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display
           Display Server: X.Org 1.18.3 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1366x768@60.00hz
           GLX Renderer: Mesa DRI Intel Bay Trail GLX Version: 3.0 Mesa 11.2.0
Audio:     Card Intel Atom Processor Z36xxx/Z37xxx Series High Definition Audio Controller
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.4.0-24-generic
Network:   Card-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169
           IF: enp3s0 state: down mac: f0:76:1c:fc:28:f1
           Card-2: Realtek RTL8723BE PCIe Wireless Network Adapter
           driver: rtl8723be
           IF: wlp4s0 state: up mac: 18:4f:32:5a:10:af
Drives:    HDD Total Size: 240.1GB (2.6% used)
           ID-1: /dev/sda model: KINGSTON_SV300S3 size: 240.1GB
           ID-2: /dev/mmcblk0 model: N/A size: 32.0GB
Partition: ID-1: / size: 17G used: 3.9G (25%) fs: ext4 dev: /dev/sda6
           ID-2: swap-1 size: 2.04GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 46.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 180 Uptime: 50 min Memory: 777.5/7869.4MB
           Client: Shell (bash) inxi: 2.2.35
mihails@lenovo ~ $

Development / What to expect in v. 7
« on: March 07, 2016, 05:12:11 pm »
Hello folks!
I know I know, it` s too early, but... any already known ideas about upcoming Peppermint 7 (I mean kernel version, icon set etc.)?

Summing up after fresh installation:

Replacing mate-power-manager with xfce4-power-manager WAS THE SALVATION for the currrent machine as well as PCNetSpec`s ADVICE `bout unstable wi-fi (see above).
Many thanks goes to all the community and especially to PCNetSpec! U-da-man, PC! 8)

CU guys soon and good luck.

Installation / Re: Lenovo laptop turns off display after installing PPM6
« on: January 04, 2016, 06:35:56 am »
..After a short while of testing, and once you're satisfied the issue is solved, can you please remember to  to come back and mark this topic (SOLVED)
I shall mark the topic for sure! I never forget about that.
Now I`m gonna reinstall PPM from scratch and see once again what about wi-fi stability and power manager`s change.
In the case of the same results as now, I`ll consider the problem(s) solved and will close the topic.  :)

Installation / Re: Lenovo laptop turns off display after installing PPM6
« on: January 03, 2016, 05:59:44 pm »
Thanks a lot, PCNetSpec!
I`ll give it a try 2morrow.
Will report back surely.

Added: DID IT.
Now after AC adapter is plugged to comp display doesn`t turn black, and I can see the information about charging etc. Looks pretty stable for now. Let`s see further.

Installation / Re: Lenovo laptop turns off display after installing PPM6
« on: January 03, 2016, 02:24:29 pm »
Well, it seems to me I`ll start with power manager.
Could you explain the process in an couple words, PCNetSpec?

Installation / Re: Lenovo laptop turns off display after installing PPM6
« on: January 03, 2016, 12:30:09 pm »
Just did as you suggested, man! Thanks! Lets see further. Wi-fi looks stable.

Added:  looks that after about 10 minutes puter goes to sleep and it` s very hard to wake it up - even adding AC power doesn`t help immediate. The way is to close the lid several times and if I add mentioned adapter it finally wakes up.
I bet it`s bad luck with a current kernel and the current hardware.  :(

Installation / Re: Lenovo laptop turns off display after installing PPM6
« on: January 03, 2016, 10:39:14 am »
BACK TO PEPPERMINT!  8) Did the recommended command-line trick, now lets see what happens with wireless.
P.S. Display still goes black after pluggin to AC.
P.P.S. Second pack of cigarettes and third liter of coffee today already...
P.P.P.S. After about 1,5 hour wi-fi looks stable...

Installation / Re: Lenovo laptop turns off display after installing PPM6
« on: January 03, 2016, 08:57:07 am »
Thanks a lot for now, PCNetSpec!
Actually I`ve already uninstalled PPMint and replaced it with Mint 17.3 Xfce beta - just because it wasn`t possible to work with PPM nomore - in the end the display used to go black even after pressing any key :'(
Well - the hope dies last! Gonna give PPMint another try today (I really do love the distro and to be honest I just don` t want to use another one (OK, lets call it habit), even not any of Mint flavors).  ::)

P.S. Perhaps it matters: Mint 17.3 installation crashed at first try (it couldn` t install grub2, reported grub back as error). Did the brute reboot, and tried once more with the same stick and same installation - all gone flawlessly. Weird...
Display problems seems to be gone for me in Rosa, BUT I` ve noticed kinda unstability with wi-fi once - it seemed for me like the signal would lose it` s strength.

Pages: [1] 2 3