Choose style:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - lend27

Pages: [1] 2 3
1
I am running a Gigabyte Mobo with intel HD4600 on board graphics.
If I install Battle.Net though PlayonLinux it installs fine, but when I try to start the game I only get a black screen.

This happens with any Ubuntu based distro running 14.04.

If I install Manjaro on the same machine Battle.net runs fine.

Also, if I install an Ubuntu distro running 15.04 I can then install the Intel proprietary graphics drivers which solves the problem.
I am running Xubuntu 15.04 and the game runs fine after I install the Intel drivers.

Peppermint 6 is running 14.04. Is there a way to upgrade to either 14.10 or 15.04? That way I could install the Intel drivers. The drivers are not avail for 14.04.

Anyone have a fix for the issue with Peppermint 6?

Thanks
Len

2
Kernel:
3.16.0-43-generic

Graphics:

  *-display               
       description: VGA compatible controller
       product: GK104 [GeForce GTX 760]
       vendor: NVIDIA Corporation
       physical id: 0
       bus info: pci@0000:01:00.0
       version: a1
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress vga_controller bus_master cap_list rom
       configuration: driver=nvidia latency=0
       resources: irq:47 memory:f6000000-f6ffffff memory:e8000000-efffffff memory:f0000000-f1ffffff ioport:e000(size=128) memory:f7000000-f707ffff

3
Is it advisable to upgrade my i7-4790 quad core with 32gig of ram?
If yes, which files would I download?

Thanks
Len

4
Installation / My Peppermint OS 6 Linux Chromebook!
« on: July 23, 2015, 08:22:35 pm »
OK guys!

Here is my Peppermint Chromebook Acer C720 all decked out!

Check out the tutorial in the "User Submitted Tutorials" section :)

It runs great!

Len



5
Installation / Re: Installed Pep OS 6 on my Chromebook C720 Acer
« on: July 23, 2015, 12:02:02 pm »
PLEASE SEE MY POST UNDER "USER SUBMITTED TUTORIALS". I TRIED TO CAPTURE ALL THE INFO IN ONE PLACE TO MAKE IT EASIER TO FOLLOW.

MODERATOR: PLEASE LET ME KNOW IF I SHOULD ADD OR CLARIFY ANYTHING ELSE.

THANKS
LEN

6
PLEASE READ THROUGH THIS POST AND MAKE SURE YOU FEEL COMFORTABLE WITH THE PROCEDURE. IT'S ACTUALLY QUITE EASY.
IF YOU HAVE ANY QUESTIONS, PLEASE ASK PRIOR TO STARTING THE INSTALL.


A brief summary of the steps involved:

1. Shutdown Chromebook.
2. Remove the back and remove the "write protect" screw. (Easier than you think).
3. Replace cover.
4. Put Chromebook in developer mode.
5. Open terminal and enter commands to allow booting from usb and enable seabios.
6. Shutdown Chromebook.
7. Startup with USB Peppermint stick inserted.
8. Press "escape" to bring up boot menu.
9. Select "1" to boot from usb.
10. At Peppermint menu, hit "tab" to bring up boot command line. Then at end of line after the dashes enter a space then enter "mem=1590m" without quotes. Press enter.
11. Install Peppermint.
12. Remove USB and restart.
13. Modify grb.cfg file (instructions below).
14. Restart and enjoy your Peppermint Chromebook :)


Here is a helpful step-by-step guide.
https://blogs.fsfe.org/the_unconventional/2014/04/20/c720-ubuntu/

This is also a helpful guide:

https://www.softwarefreedom.org/blog/2014/dec/01/de-chrome-acer-c720/

OK, here we go.

I've had my Acer C720 chromebook for about 6 months.
First I installed crouton linux alongside the Chrome OS.  I realized I wasn't really using chrome anymore so decided to erase chrome and install full time linux.
I then researched and found Huge Green Bugs website, Distroshare, and he has several linux distros modified for the C720, so I tried a few of those. Very nice, but since I run Peppermint on my desktop I figured I would try it.

I downloaded and installed to USB. I actually tried it with Unetbootin on linux but had problems. Then I went to my windows install and used Rufus to install.  I also tried Win32 imager in windows. Had problems with all 3. Keep in mind you have to install Seabios onto your chromebook to be able to legacy boot from usb.  There are tutorials for that online. If you need me to point you to the right tutorial let me know. Once you have Seabios enabled, you insert the Peppermint USB and turn on the chromebook. There will be a prompt to hit the escape key to bring up the usb boot menu. Then you select 1 to boot from USB. I think Unetbootin will work fine for most of you. My initial problems were related to the boot issue outlined below.

The Peppermingt install menu will come up, but don't select anything. It will not boot as is. It will give you an error message saying "insufficient ram to boot the image".
You have to hit the tab key, then you will see the boot code at a CLI prompt. The line ends with "--" or "---". ( 2 or 3 dashes) .
*** At the end of that line add a space, then enter "mem=1590m" . Once you have the entered, click on install peppermint from the menu and it will change to a white screen. Don't do anything, just wait and it will eventually change to the Peppermint install screen.  Just install as you would normally.
Once the install is done, remove the USB and reboot.
It will automatically boot to a usable Peppermint install.
Now, one more critical item.

My chromebook has 4 gig of ram.
*** The instructions I found online tell you to add a line to the boot code that says "mem=4g".  This does not work.
Follow my instructions above which will get you a working system. Then once you have your install done, you will need to go into boot.cfg and take all references to "mem=1590m" out. Just open leafpad and search for "mem=". This will highlight the references to "mem=1590m". Once you remove all references, ( just delete that text, not the entire line that it is in), reboot and your system recognize the full amount of ram you have installed.  Until you remove that text your system will only show 1590m of ram. I verified all of these steps with my own install.

The nice thing is I didn't have to struggle to get anything working so far. Other distros have an issue with the trackpad, requiring debugging. Not so with Peppermint. Trackpad and everything else seems to work just fine.
I even installed Steam and am able to play most games, even Xcom Enemy Unknown.
Ice is working fine, Kodi, Geary, Chrome, Gthumb, Banshee, VLC.

Here is a screenshot:



Again, these guides are helpful:

https://blogs.fsfe.org/the_unconventional/2014/04/20/c720-ubuntu/

This is also a helpful guide:

https://www.softwarefreedom.org/blog/2014/dec/01/de-chrome-acer-c720/

Just follow the steps until it's time to install the distro and then work with Peppermint.
IMHO, this first link is the easiest to follow step by step.

https://blogs.fsfe.org/the_unconventional/2014/04/20/c720-ubuntu/

If you follow until the section "some potential issues", you should have a working Peppermint system. Don't mess with the other issues he addresses until you use your chromebook with Peppermint for awhile. Most of the issues are non-issues now with the kernel upgrades.
The volume and brightness keys are not mapped correctly though. I am still trying to get that fixed. I will post a fix asap.
The back of the chromebook is actually easy to remove. Just follow the steps. A guitar pick or other thin plastic item will work. Once you get a corner seperated, the rest should be easy.
BTW, I replaced the orig SSD with a 120gig model and it works fine. Plenty of instructions avail online for that.

NOTE: Some of these guides do not address the RAM issue. Please make sure you follow my instructions on that or you will not get the chromebook to boot from your peppermint USB stick. VERY IMPORTANT.

To clarify:

When you are at the step where you boot from the usb, make sure you press "escape" to enter the boot options menu. Select 1 to boot from USB. This will bring up the Peppermint install menu. Do not select anything. Instead, press "Tab" then at the end of the long boot instruction line which ends with some dashes (either -- or ---) add a space after the dashes, then type "mem=1590m" without quotes. Then press enter. This will bring up a white screen. Just wait patiently and the Peppermint install screen will appear. Then just follow as you normally would to complete the install. Once the install finishes, press restart and as soon as the screen goes black remove the usb stick. It will not boot to the hard drive with the usb stick inserted. Once you remove the usb stick, the system will boot to your new shiny Peppermint install. Play around a bit to check things out. Once you feel comfortable, modify the grub.cfg file to remove the references to "mem=1590m". If you dont do this, the system will only recognize that amount of ram. In my case I have 4g and of course I wanted all of it available. Modifying the grub.cfg file will do that for you. I verified this before and after.

To modify the grub.cfg file, I opened a terminal and installed Leafpad. Then I entered the command "gksudo leafpad". I entered my password and leafpad opened. I clicked on "file" from the Ieafpad menu, then click on "open", then click on "File System", then click on "boot", then click on "grub", then open "grub.cfg". I opened the file and used the "search/find" command to locate all references to "mem=". This highlighted the text that had to be removed. Remember to only remove that specific text, not the entire line that it is in. Do that with each reference. Then, to be safe, use the find command again to make sure you got them all. Then save the file and reboot. Now all of your ram will be available to your system.

Good Luck!



Any questions please let me know.


Thanks!

Len

7
Installation / Re: Installed Pep OS 6 on my Chromebook C720 Acer
« on: July 22, 2015, 05:30:45 pm »
Either of these will get the job done:

Just follow the steps until it's time to install the distro and then work with Peppermint.
IMHO, this first link is the easiest to follow step by step.
If you follow until the section "some potential issues", you should have a working Peppermint system. Don't mess with the other issues he addresses until you use your chromebook with Peppermint for awhile. Most of the issues are non-issues now with the kernel upgrades.
The volume and brightness keys are not mapped correctly though. I am still trying to get that fixed. I will post a fix asap.
The back of the chromebook is actually easy to remove. Just follow the steps. A guitar pick or other thin plastic item will work. Once you get a corner seperated, the rest should be easy.
BTW, I replaced the orig SSD with a 120gig model and it works fine. Plenty of instructions avail online for that.

NOTE: Some of these guides do not address the RAM issue. Please make sure you follow my instructions on that or you will not get the chromebook to boot from your peppermint USB stick. VERY IMPORTANT.

To clarify:

When you are at the step where you boot from the usb, make sure you press "escape" to enter the boot options menu. Select 1 to boot from USB. This will bring up the Peppermint install menu. Do not select anything. Instead, press "Tab" then at the end of the long boot instruction line which ends with some dashes (either -- or ---) add a space after the dashes, then type "mem=1590m" without quotes. Then press enter. This will bring up a white screen. Just wait patiently and the Peppermint install screen will appear. Then just follow as you normally would to complete the install. Once the install finishes, press restart and as soon as the screen goes black remove the usb stick. It will not boot to the hard drive with the usb stick inserted. Once you remove the usb stick, the system will boot to your new shiny Peppermint install. Play around a bit to check things out. Once you feel comfortable, modify the grub.cfg file to remove the references to "mem=1590m". If you dont do this, the system will only recognize that amount of ram. In my case I have 4g and of course I wanted all of it available. Modifying the grub.cfg file will do that for you. I verified this before and after.

To modify the grub.cfg file, I opened a terminal and installed Leafpad. Then I entered the command "gksudo leafpad". I entered my password and leafpad opened. I clicked on "file" from the Ieafpad menu, then click on "open", then click on "File System", then click on "boot", then click on "grub", then open "grub.cfg". I opened the file and used the "search/find" command to locate all references to "mem=". This highlighted the text that had to be removed. Remember to only remove that specific text, not the entire line that it is in. Do that with each reference. Then, to be safe, use the find command again to make sure you got them all. Then save the file and reboot. Now all of your ram will be available to your system.

Good Luck!

https://blogs.fsfe.org/the_unconventional/2014/04/20/c720-ubuntu/

This is also a helpful guide:

https://www.softwarefreedom.org/blog/2014/dec/01/de-chrome-acer-c720/


Any questions please let me know.


Thanks!

Len

8
Installation / Re: Installed Pep OS 6 on my Chromebook C720 Acer
« on: July 22, 2015, 11:51:52 am »
Andy's that impressed he added 10 to your name :))

Thanks!  :-)

Len

9
Installation / Re: Installed Pep OS 6 on my Chromebook C720 Acer
« on: July 21, 2015, 09:52:12 pm »
Hi lend27,


I agree completely with PCNetSpec about the tutorial!! In any case, could you run and post here the results of this command (run in a terminal session) in your C720:
Code: [Select]
inxi -F
Thanks in advance.


Regards,


-- Slim

Code: [Select]
len@len-Peppy ~ $ inxi -F
System:    Host: len-Peppy Kernel: 3.16.0-43-generic x86_64 (64 bit) Desktop: N/A Distro: Peppermint Six
Machine:   System: Acer product: Peppy version: 1.0
           Mobo: N/A model: N/A Bios: coreboot version: N/A date: 08/13/2014
CPU:       Dual core Intel Celeron 2957U (-MCP-) cache: 2048 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx)
           Clock Speeds: 1: 845.140 MHz 2: 800.296 MHz
Graphics:  Card: Intel Haswell-ULT Integrated Graphics Controller
           X.Org: 1.16.0 drivers: intel (unloaded: fbdev,vesa) Resolution: 1366x768@60.0hz
           GLX Renderer: Mesa DRI Intel Haswell Mobile GLX Version: 3.0 Mesa 10.3.2
Audio:     Card-1: Intel Lynx Point-LP HD Audio Controller driver: snd_hda_intel Sound: ALSA ver: k3.16.0-43-generic
           Card-2: Intel Haswell-ULT HD Audio Controller driver: snd_hda_intel
Network:   Card: Qualcomm Atheros AR9462 Wireless Network Adapter driver: ath9k
           IF: wlan0 state: up mac: 38:b1:db:54:ac:01
Drives:    HDD Total Size: 120.0GB (33.3% used) 1: id: /dev/sda model: ZTC size: 120.0GB
Partition: ID: / size: 107G used: 38G (37%) fs: ext4 ID: swap-1 size: 4.23GB used: 0.00GB (0%) fs: swap
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 47.8C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 167 Uptime: 38 min Memory: 987.5/3893.6MB Client: Shell (bash) inxi: 1.9.17
len@len-Peppy ~ $

10
Installation / Re: Installed Pep OS 6 on my Chromebook C720 Acer
« on: July 21, 2015, 08:39:30 pm »
Yes, Seabios is a must and the ram instructions are a workaround for the insufficient ram issue.


11
Installation / Re: Installed Pep OS 6 on my Chromebook C720 Acer
« on: July 21, 2015, 07:57:45 pm »
OK, here we go.

I've had my Acer C720 chromebook for about 6 months.
First I installed crouton linux alongside the Chrome OS.  I realized I wasn't really using chrome anymore so decided to erase chrome and install full time linux.
I then researched and found Huge Green Bugs website, Distroshare, and he has several linux distros modified for the C720, so I tried a few of those. Very nice, but since I run Peppermint on my desktop I figured I would try it.

I downloaded and installed to USB. I actually tried it with Unetbootin on linux but had problems. Then I went to my windows install and used Rufus to install.  I also tried Win32 imager in windows. Had problems with all 3. Keep in mind you have to install Seabios onto your chromebook to be able to legacy boot from usb.  There are tutorials for that online. If you need me to point you to the right tutorial let me know. Once you have Seabios enabled, you insert the Peppermint USB and turn on the chromebook. There will be a prompt to hit the escape key to bring up the usb boot menu. Then you select 1 to boot from USB. I think Unetbootin will work fine for most of you. My initial problems were related to the boot issue outlined below.

The Peppermingt install menu will come up, but don't select anything. It will not boot as is. It will give you an error message saying "insufficient ram to boot the image".
You have to hit the tab key, then you will see the boot code at a CLI prompt. The line ends with "--" or "---". ( 2 or 3 dashes) .
*** At the end of that line add a space, then enter "mem=1590m" . Once you have the entered, click on install peppermint from the menu and it will change to a white screen. Don't do anything, just wait and it will eventually change to the Peppermint install screen.  Just install as you would normally.
Once the install is done, remove the USB and reboot.
It will automatically boot to a usable Peppermint install.
Now, one more critical item.

My chromebook has 4 gig of ram.
*** The instructions I found online tell you to add a line to the boot code that says "mem=4g".  This does not work.
Follow my instructions above which will get you a working system. Then once you have your install done, you will need to go into boot.cfg and take all references to "mem=1590m" out. Just open leafpad and search for "mem=". This will highlight the references to "mem=1590m". Once you remove all references, ( just delete that text, not the entire line that it is in), reboot and your system recognize the full amount of ram you have installed.  Until you remove that text your system will only show 1590m of ram. I verified all of these steps with my own install.

The nice thing is I didn't have to struggle to get anything working so far. Other distros have an issue with the trackpad, requiring debugging. Not so with Peppermint. Trackpad and everything else seems to work just fine.
I even installed Steam and am able to play most games, even Xcom Enemy Unknown.
Ice is working fine, Kodi, Geary, Chrome, Gthumb, Banshee, VLC.

Here is a screenshot:

Any questions let me know.




12
Installation / Installed Pep OS 6 on my Chromebook C720 Acer
« on: July 21, 2015, 10:05:31 am »
Installed easily and running great.
Let me know if you need any help getting onto your C720.

Thanks
Len

13
New Users / Re: how to hide grub menu in p6?
« on: July 19, 2015, 07:45:20 pm »
You can also install Grub Customizer and disable the menu using that. It's a bit easier and GUI based so no terminal involved.

Len

14
GNU/Linux Gaming / Steam download drive question please
« on: July 11, 2015, 06:08:54 pm »
Steam installed on my main SSD, but I want games to be saved to another internal SSD.
When I bring up steam and try to download a game it gives me a chance to designate the drive to save to.
When I navigate to the drive it says "drive must be writeable".
Evidently the permissions on the drive are wrong.

How can I correct this so I can save to correct drive?

Thanks
Len

15
Software & Applications / Whisker menu?
« on: July 03, 2015, 10:07:21 pm »
Is there a way to add the whisker-menu to the panel?
I downloaded it but it's not included in the items available to add to the panel.

Thanks!
Len

Pages: [1] 2 3