Choose style:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - kukel21

Pages: [1]
1
Networking / Re: Very weak wifi signal reception.
« on: October 29, 2018, 08:19:19 am »
YAY! finally works  :D thanks alot the commands work after i got those essentials and now i got reception even im down stairs. Thanks alot Admin for your time and effort :D now ill have time to enjoy and learn about linux using peppermint. Thanks Alot again :D p.s ill mark this one as solved  ;)

2
Networking / Re: Very weak wifi signal reception.
« on: October 29, 2018, 01:10:29 am »
hi i tried this one but still the same results and the make command is not found so i installed by typing apt install not like make install. but sadly im still having the same problem ;(

3
Networking / Re: Very weak wifi signal reception.
« on: October 28, 2018, 11:13:06 am »
tried all of the above twice and check if anything worked but still the same sadly

4
Networking / Re: Very weak wifi signal reception.
« on: October 28, 2018, 09:45:12 am »
Yes the edited one with the putting the line  options rtl8723be ant_sel=2 etc.

5
Networking / Re: Very weak wifi signal reception.
« on: October 28, 2018, 09:41:33 am »
i tried this but its still the same unfortunately  :( so i reverted back using your instructions thanks.

6
Networking / Very weak wifi signal reception. (SOLVED)
« on: October 28, 2018, 09:03:17 am »
Hi guys im having problems with my wifi reception signal its very weak like i cant get away for 2  meters from my router and if i get too far away the connection drops. i tried to use lubuntu 18.10 and wifi works great but its slow for me so im hoping for your support again so i can fully use pm 9 thanks.

Code: [Select]
 sudo lspci -vnn | grep -i net
[sudo] password for michael:
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
    Subsystem: Hewlett-Packard Company RTL8723BE PCIe Wireless Network Adapter [103c:81c1]
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 07)
    Subsystem: Hewlett-Packard Company RTL810xE PCI Express Fast Ethernet controller [103c:81e1]

Code: [Select]
 sudo lshw -C network
[sudo] password for michael:
  *-network                 
       description: Wireless interface
       product: RTL8723BE PCIe Wireless Network Adapter
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:02:00.0
       logical name: wlp2s0
       version: 00
       serial: 3c:a0:67:79:0c:87
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
       configuration: broadcast=yes driver=rtl8723be driverversion=4.15.0-38-generic firmware=N/A ip=192.168.254.111 latency=0 link=yes multicast=yes wireless=IEEE 802.11
       resources: irq:18 ioport:2000(size=256) memory:91200000-91203fff
  *-network
       description: Ethernet interface
       product: RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
       vendor: Realtek Semiconductor Co., Ltd.
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: enp3s0
       version: 07
       serial: 30:e1:71:80:73:b9
       size: 10Mbit/s
       capacity: 100Mbit/s
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
       configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8106e-1_0.0.1 06/29/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s
       resources: irq:116 ioport:1000(size=256) memory:91100000-91100fff memory:91000000-91003fff
Code: [Select]
iwconfig
lo        no wireless extensions.

wlp2s0    IEEE 802.11  ESSID:"Engineer's Playground" 
          Mode:Managed  Frequency:2.457 GHz  Access Point: 84:16:F9:EC:47:08   
          Bit Rate=7.2 Mb/s   Tx-Power=20 dBm   
          Retry short limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:on
          Link Quality=38/70  Signal level=-72 dBm 
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:598   Missed beacon:0

enp3s0    no wireless extensions.
Code: [Select]
sudo iwlist scan
[sudo] password for michael:
lo        Interface doesn't support scanning.

wlp2s0    Scan completed :
          Cell 01 - Address: 84:16:F9:EC:47:08
                    Channel:10
                    Frequency:2.457 GHz (Channel 10)
                    Quality=38/70  Signal level=-72 dBm 
                    Encryption key:on
                    ESSID:"Engineer's Playground"
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
                              18 Mb/s; 36 Mb/s; 54 Mb/s
                    Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
                    Mode:Master
                    Extra:tsf=00000122edb2cf58
                    Extra: Last beacon: 72ms ago
                    IE: Unknown: 0015456E67696E656572277320506C617967726F756E64
                    IE: Unknown: 010882848B961224486C
                    IE: Unknown: 03010A
                    IE: Unknown: 2A0104
                    IE: Unknown: 32040C183060
                    IE: Unknown: 2D1A6E1116FF00000001000000000000000000000000000000000000
                    IE: Unknown: 3D160A000600000000000000000000000000000000000000
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : TKIP CCMP
                        Authentication Suites (1) : PSK
                    IE: IEEE 802.11i/WPA2 Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (2) : TKIP CCMP
                        Authentication Suites (1) : PSK
                    IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
                    IE: Unknown: 4A0E14000A002C01C800140005001900
                    IE: Unknown: 7F0400000001
                    IE: Unknown: DD07000C4300000000
                    IE: Unknown: 0706504800010D10

enp3s0    Interface doesn't support scanning.
Code: [Select]
rfkill list
0: hci0: Bluetooth
    Soft blocked: no
    Hard blocked: no
1: phy0: Wireless LAN
    Soft blocked: no
    Hard blocked: no
Some codes that may help thanks alot again :D

7
Installation / Re: Reinstalling failed on grub2 package (SOLVED)
« on: October 27, 2018, 08:54:27 am »
 Thanks guys for the support i really appreciate it for helping a newbie like me :D I already marked this one as Solved as per requested :D Thanks

8
Installation / Re: Reinstalling failed on grub2 package
« on: October 26, 2018, 09:20:08 pm »
Yay! Thanks now it installed properly :D but now the problem is still on my wifi connection i tried solutions online on other linux forums but still the same with weak reception like i cant go far from my router because the connection will disconnect. Should i post the problem here or should i post in the networking section? thanks alot again :D

9
Installation / Re: Reinstalling failed on grub2 package
« on: October 26, 2018, 10:16:41 am »
Hi thanks for the support and welcome :). Well i tried installing with internet( Ethernet connection with download with updates and 3rd party) and no internet( Disconnected ethernet) but still persist though.

Code: [Select]
~ $ inxi -Fz
System:    Host: peppermint Kernel: 4.15.0-23-generic x86_64 bits: 64 Desktop: N/A
           Distro: Peppermint Nine
Machine:   Device: laptop System: Hewlett-Packard product: HP Notebook serial: N/A
           Mobo: Hewlett-Packard model: 81E1 v: KBC Version 71.17 serial: N/A
           UEFI: Insyde v: F.22 date: 11/04/2016
Battery    BAT0: charge: 37.4 Wh 100.0% condition: 37.4/37.4 Wh (100%)
CPU:       Dual core Intel Celeron N3060 (-MCP-) cache: 1024 KB
           clock speeds: max: 2480 MHz 1: 1320 MHz 2: 2135 MHz
Graphics:  Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
           Display Server: x11 (X.Org 1.19.6 )
           drivers: modesetting (unloaded: fbdev,vesa)
           Resolution: 1366x768@60.01hz
           OpenGL: renderer: Mesa DRI Intel HD Graphics 400 (Braswell)
           version: 4.5 Mesa 18.0.0-rc5
Audio:     Card Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series High Def. Audio Controller
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.15.0-23-generic
Network:   Card-1: Realtek RTL8723BE PCIe Wireless Network Adapter
           driver: rtl8723be
           IF: wlp2s0 state: down mac: <filter>
           Card-2: Realtek RTL8101/2/6E PCIE Fast/Gigabit Ethernet controller
           driver: r8169
           IF: enp3s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 504.1GB (0.8% used)
           ID-1: /dev/sda model: TOSHIBA_MQ01ABF0 size: 500.1GB
           ID-2: USB /dev/sdb model: Flash_Disk size: 4.0GB
Partition: ID-1: / size: 1.9G used: 169M (9%) fs: overlay dev: N/A
           ID-2: swap-1 size: 0.99GB used: 0.00GB (0%) fs: swap dev: /dev/zram0
           ID-3: swap-2 size: 0.99GB used: 0.00GB (0%) fs: swap dev: /dev/zram1
           ID-4: swap-3 size: 1.03GB used: 0.00GB (0%) fs: swap dev: /dev/dm-2
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 45.0C mobo: 0.0C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 176 Uptime: 20 min Memory: 945.6/3786.7MB
           Client: Shell (bash) inxi: 2.3.56


Code: [Select]
 sudo fdisk -l
Disk /dev/loop0: 1.2 GiB, 1286332416 bytes, 2512368 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: gpt
Disk identifier: 5A31289E-62CB-4AEC-A8D8-8511B6585413

Device       Start       End   Sectors   Size Type
/dev/sda1     2048   1050623   1048576   512M EFI System
/dev/sda2  1050624   2549759   1499136   732M Linux filesystem
/dev/sda3  2549760 976771071 974221312 464.6G Linux filesystem




Disk /dev/sdb: 3.8 GiB, 4026531840 bytes, 7864320 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x006839e2

Device     Boot Start     End Sectors  Size Id Type
/dev/sdb1  *     2048 7864319 7862272  3.8G  c W95 FAT32 (LBA)


Disk /dev/zram0: 946.7 MiB, 992661504 bytes, 242349 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/zram1: 946.7 MiB, 992661504 bytes, 242349 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/mapper/sda3_crypt: 464.6 GiB, 498799214592 bytes, 974217216 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/mapper/peppermint--vg-root: 463.6 GiB, 497767415808 bytes, 972201984 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/mapper/peppermint--vg-swap_1: 980 MiB, 1027604480 bytes, 2007040 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes

Code: [Select]
 blkid
/dev/sda1: UUID="2DC6-7BB0" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="4cbe9f40-ddaf-4b1b-ba15-f8cf2b935926"
/dev/sda2: UUID="63e90106-ac75-465b-a1f9-9e590b3c898d" TYPE="ext4" PARTUUID="234a92be-f704-4075-adb3-30ac2c81e579"
/dev/sdb1: LABEL="PEPPERMINT" UUID="48F9-8512" TYPE="vfat" PARTUUID="006839e2-01"
/dev/mapper/peppermint--vg-swap_1: UUID="20ba66a3-f777-409a-b08d-443668c30842" TYPE="swap"
/dev/mapper/peppermint--vg-root: UUID="b902d642-3ff5-409a-b488-526d77fe582c" TYPE="ext4"


Code: [Select]
[ -d /sys/firmware/efi ] && echo "UEFI Mode" || echo "Legacy BIOS mode"
UEFI Mode

Here are the logs hope it helps thanks again :)

10
Installation / Reinstalling failed on grub2 package (SOLVED)
« on: October 26, 2018, 09:07:21 am »
Hi guys i already installed peppermint 9 for the first time already but i got some problem with my wifi ( very weak in receiving reception like i cant go far from my router like even 2 meters the wifi connection will disconnect) so i decided to try some other os and its android based but i didnt like it and its still buggy and not snappy as this one so i reinstalled but it always fails on grub2 package i tried erase disk all together like how like i installed this one in the first place and let it do its thing but it still persist. im very new to new to linux in general so idk what to do so if you could help me it would be much appreciated thanks alot :)

Pages: [1]