Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - alynur

Pages: 1 [2] 3 4 ... 75
16
Hardware / Re: RX 570 Black Screen with 5 series & late 4 series kernels
« on: September 29, 2020, 09:27:10 pm »
check if this discussion helps you. https://forums.linuxmint.com/viewtopic.php?t=310609


17
Hardware / Re: easynote alp-isis webcam drivers
« on: September 29, 2020, 04:20:20 pm »
Hi Bob123, could you run

Code: [Select]
inxi -Fz in a terminal and paste the results back here?

18
Hardware / Re: RX 570 Black Screen with 5 series & late 4 series kernels
« on: September 29, 2020, 04:18:09 pm »
While you are in Ubuntu, could you install inxi and then run

Code: [Select]
inxi -Fz
and paste the results back here?

19
Installation / Re: Can't install on HP Laptop
« on: September 29, 2020, 04:14:03 pm »
Is your hard drive file system mbr or gpt?

20
Software & Applications / Re: Terminal app recommendation
« on: September 29, 2020, 03:56:08 pm »
I also use cut and paste while in the terminal, if this is an out of the box problem, you'll probably have to reinstall to fix it and probably some other problems that you haven't experienced yet.

21
New Users / Re: Black screen after logon
« on: September 29, 2020, 03:52:29 pm »
My question is, how important is it to lock the screen when you walk away from the laptop? Are you closing the lid or leaving it open?

22
New Users / Re: Hard Drive Cloning
« on: September 29, 2020, 03:49:55 pm »
Have you tied copying partitions with Gparted?

23
New Users / Re: Package update failing on Peppermint 10.0.0
« on: September 29, 2020, 03:46:30 pm »
One thing I do when I have update problems is change my software source to a different mirror. This has worked for me several times, has also aided when the update downloads would reduce to a crawl.

24
Software & Applications / Re: Creating a portable OS on a USB pendrive
« on: September 15, 2020, 12:08:09 pm »
Hi Fitzroy, be sure to use a usb stick of at least 32gb, the bigger the better. You will need to know if you're going to make it a Legacy or EUFI  bootable system because you'll have to prep the usb stick for a EUFI installation. If you can, definitely disconnect the hard drive, that way when grub is created it won't list the computer's hard drive. There have been a few conversations about how to do this here before, look under Installation in the forum. Good luck.

25
New Users / Re: Stuck at Boot
« on: September 15, 2020, 11:56:14 am »
Hey Rusty, welcome to Peppermint. There are two things I would highly recommend you learn how to do for the next time you run into a similar problem. First, learn how to use Timeshift and take a snapshot of your system when it is running good and especially before adding new software.  Second, learn how to use a DATA partition so in case you do have to reinstall from fresh you won't lose your personal files. Good luck.

26
Hi pepperOS, as the instructions say "Installing LosslessCut on Linux
LosslessCut has no tedious installation procedure. Just download the Zip file using the button below. Extract it. And launch the application by double-clicking on the “LosslessCut” executable file in the extracted folder. You may have to change the permission of the file to make it executable. These steps work on all the Linux distributions."
Once in a while you will find software that work this way.

27
New Users / Re: [Solved] How do I backup ICE?
« on: August 27, 2020, 01:21:35 pm »
Hi Grateful4Linux, a 128gb SSD would be excellent as a multiboot systems launcher with home folders symlinked to a larger HDD. I do that myself and I take snapshots of my o/s whenever I remember or after installing new software, using Timeshift. The snapshots are normally 4-8 gb in size, depending on the o/s. My Timeshift snapshots get stored on a 500gb external hard drive which I connect when I plan on taking a snapshot or saving new home files into the storage partition. Just thought I'ld throw that out there.  ;D

28
Software & Applications / Re: Ice files won't launch
« on: August 27, 2020, 12:54:11 pm »
is it possible you created them and marked it for Chrome or Chromium without either installed?
Hi josephd, I actually did do that, created the SSB's before installing Chrome but when they wouldn't launch I realized my mistake and in this order, installed Chrome, deleted the SSB's and recreated the SSB's to no avail.  Slimjet is my default browser but to be sure, I created the SSB's from within Chrome and they still don't launch. SSB's marked for Firefox do launch but I am looking to remove Firefox from my systems. This problem is only happenimg in my laptop after a new install of P 10. I don't have any problems with ICE in my desktop with P 10 or P 9.

Hi alynur,

Were these SSB's you freshly created or ones that you backed up and added back in after your install?

Hi stevesveryown, as I have mentioned, these are freshly created SSB's. I have never had any luck with backing things up with the intention of readding after a fresh install. I figured it was because I still don't know what I'm doing.  ::)

29
Software & Applications / Ice files won't launch
« on: August 24, 2020, 07:45:04 am »
After doing a fresh install of P 10 on my laptop, which fixed my mic and camera problems, the Ice SSB's I've created won't launch. How can I fix this?


Code: [Select]
System:    Host: albert-laptop Kernel: 5.4.0-42-generic x86_64 bits: 64
           Desktop: N/A Distro: Peppermint Ten
Machine:   Device: laptop System: SAMSUNG product: 300E4A/300E5A/300E7A/3430EA/3530EA v: 0.1 serial: N/A
           Mobo: SAMSUNG model: 300E4A/300E5A/300E7A/3430EA/3530EA v: FAB1 serial: N/A
           UEFI: Phoenix v: 03QA date: 12/14/2011
Battery    BAT1: charge: 32.9 Wh 80.0% condition: 41.1/48.8 Wh (84%)
CPU:       Dual core Intel Core i5-2450M (-MT-MCP-) cache: 3072 KB
           clock speeds: max: 3100 MHz 1: 1034 MHz 2: 1087 MHz 3: 1180 MHz
           4: 992 MHz
Graphics:  Card: Intel 2nd Generation Core Integrated Graphics Controller
           Display Server: x11 (X.Org 1.20.8 ) driver: intel
           Resolution: 1366x768@60.07hz
           OpenGL: renderer: Mesa DRI Intel HD Graphics 3000 (SNB GT2)
           version: 3.3 Mesa 20.0.8
Audio:     Card Intel 6 Series/C200 Series Family High Def. Audio Controller
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k5.4.0-42-generic
Network:   Card-1: Intel Centrino Wireless-N 130 driver: iwlwifi
           IF: wlp1s0 state: up mac: <filter>
           Card-2: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
           driver: r8169
           IF: enp2s0 state: down mac: <filter>
Drives:    HDD Total Size: 240.1GB (39.4% used)
           ID-1: /dev/sda model: SATA_SSD size: 240.1GB
Partition: ID-1: / size: 48G used: 9.0G (20%) fs: ext4 dev: /dev/sda2
           ID-2: swap-1 size: 8.38GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 58.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 224 Uptime: 37 min Memory: 1305.5/7874.6MB
           Client: Shell (bash) inxi: 2.3.56

30
Hardware / Re: Webcam troubles - Device not found
« on: August 19, 2020, 07:43:32 pm »
I did some more investigating with my laptop. I have two Peppermint usb sticks, one with P 9 and one with P8 installed. With the laptop booted up into either one, my camera and mic are both recognized in Slimjet when making a video call in fb. So I took the big step of doing a fresh install of P 10 into the laptop and I now have use of the mic and camera.

Here's what my system looks like:

Code: [Select]
System:    Host: albert-laptop Kernel: 5.4.0-42-generic x86_64 bits: 64
           Desktop: N/A Distro: Peppermint Ten
Machine:   Device: laptop System: SAMSUNG product: 300E4A/300E5A/300E7A/3430EA/3530EA v: 0.1 serial: N/A
           Mobo: SAMSUNG model: 300E4A/300E5A/300E7A/3430EA/3530EA v: FAB1 serial: N/A
           UEFI: Phoenix v: 03QA date: 12/14/2011
Battery    BAT1: charge: 32.9 Wh 80.0% condition: 41.1/48.8 Wh (84%)
CPU:       Dual core Intel Core i5-2450M (-MT-MCP-) cache: 3072 KB
           clock speeds: max: 3100 MHz 1: 2151 MHz 2: 1723 MHz 3: 1854 MHz
           4: 2422 MHz
Graphics:  Card: Intel 2nd Generation Core Integrated Graphics Controller
           Display Server: x11 (X.Org 1.20.1 )
           drivers: modesetting (unloaded: fbdev,vesa)
           Resolution: 1366x768@60.07hz
           OpenGL: renderer: Mesa DRI Intel HD Graphics 3000 (SNB GT2)
           version: 3.3 Mesa 20.0.8
Audio:     Card Intel 6 Series/C200 Series Family High Def. Audio Controller
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k5.4.0-42-generic
Network:   Card-1: Intel Centrino Wireless-N 130 driver: iwlwifi
           IF: wlp1s0 state: up mac: <filter>
           Card-2: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
           driver: r8169
           IF: enp2s0 state: down mac: <filter>
Drives:    HDD Total Size: 740.2GB (44.2% used)
           ID-1: /dev/sda model: SATA_SSD size: 240.1GB
           ID-2: USB /dev/sdb model: MARSHAL_EXTERNAL size: 500.1GB
Partition: ID-1: / size: 48G used: 8.3G (19%) fs: ext4 dev: /dev/sda2
           ID-2: swap-1 size: 8.38GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 61.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 236 Uptime: 2:28 Memory: 1898.5/7874.6MB
           Client: Shell (bash) inxi: 2.3.56

Pages: 1 [2] 3 4 ... 75