Choose style:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - jlschwartz

Pages: 1 2 [3] 4 5 ... 15
Networking / Re: New Macbook Air Wifi Adapter Issue
« on: April 17, 2018, 10:00:06 am »
If it helps you any, the Macbook Air runs and will use wifi on MX-17.1 but only when plugged into power.  This is on a live usb as well.  It will not work on battery only.  It uses the wl driver.  More info below from the system running on MX-17 in case it helps you.  Thank you for all of your help.

Code: [Select]
System:    Host: mx1 Kernel: 4.15.0-1-amd64 x86_64 bits: 64 Desktop: Xfce 4.12.3 
           Distro: MX-17.1_x64 Horizon March 14, 2018
Machine:   Type: Laptop System: Apple product: MacBookAir7,2 v: 1.0 serial: N/A
           Mobo: Apple model: Mac-937CB26E2E02BB01 v: MacBookAir7,2 serial: N/A UEFI: Apple
           v: MBA71.88Z.0176.B00.1802270937 date: 02/27/2018
Battery:   ID-1: BAT0 charge: 55.0 Wh condition: 56.0/54.3 Wh (103%)
CPU:       Topology: Dual Core model: Intel Core i7-5650U type: MT MCP L2 cache: 4096 KiB
           Speed: 800 MHz min/max: 500/3200 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800
Graphics:  Card-1: Intel HD Graphics 6000 driver: i915 v: kernel
           Display Server: x11 (X.Org 1.19.2) driver: modesetting unloaded: fbdev,vesa
           resolution: 1440x900~60Hz
           OpenGL: renderer: Mesa DRI Intel HD Graphics 6000 (Broadwell GT3) v: 4.5 Mesa 13.0.6
Audio:     Card-1: Intel Broadwell-U Audio driver: snd_hda_intel
           Card-2: Intel Wildcat Point-LP High Definition Audio driver: snd_hda_intel
           Sound Server: ALSA v: k4.15.0-1-amd64
Network:   Card-1: Broadcom Limited BCM4360 802.11ac Wireless Network Adapter driver: wl
           IF: wlan0 state: up mac: d0:81:7a:b9:6a:d6
Drives:    HDD Total Size: 353.29 GiB used: 6.05 GiB (1.7%)
           ID-1: /dev/sda model: APPLE_SSD_SM0256 size: 233.76 GiB
           ID-2: /dev/sdb type: USB model: Flash_Drive size: 119.53 GiB
Partition: ID-1: / size: 19.56 GiB used: 2.68 GiB (13.7%) fs: overlay dev: ERR-102
Sensors:   System Temperatures: cpu: 54.0 C mobo: N/A
           Fan Speeds (RPM): N/A
Repos:     Active apt repos in: /etc/apt/sources.list.d/antix.list
           1: deb stretch main
           Active apt repos in: /etc/apt/sources.list.d/debian-stable-updates.list
           1: deb stretch-updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/debian.list
           1: deb stretch main contrib non-free
           2: deb stretch/updates main contrib non-free
           Active apt repos in: /etc/apt/sources.list.d/mx.list
           1: deb stretch main non-free
           No active apt repos in: /etc/apt/sources.list.d/various.list
Info:      Processes: 202 Uptime: 1m Memory: 7.70 GiB used: 579.9 MiB (7.4%) Shell: init
           inxi: 3.0.00

Networking / Re: New Macbook Air Wifi Adapter Issue
« on: April 17, 2018, 08:41:40 am »
Ok.  I pasted the output below from a text file created on the macbook air using a live usb containing Peppermint 8 respin.   I hope it helps.  Thank you for your help.   :)

Code: [Select]
peppermint@peppermint ~ $ lsusb
Bus 002 Device 002: ID 05ac:8406 Apple, Inc.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 05ac:0291 Apple, Inc.
Bus 001 Device 008: ID 05ac:828f Apple, Inc.
Bus 001 Device 004: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth)
Bus 001 Device 003: ID 046d:c51b Logitech, Inc. V220 Cordless Optical Mouse for Notebooks
Bus 001 Device 002: ID 18a5:0304 Verbatim, Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
peppermint@peppermint ~ $ sudo lshw -C network
       description: Network controller
       product: BCM4360 802.11ac Wireless Network Adapter
       vendor: Broadcom Corporation
       physical id: 0
       bus info: pci@0000:03:00.0
       version: 03
       width: 64 bits
       clock: 33MHz
       capabilities: pm msi pciexpress bus_master cap_list
       configuration: driver=bcma-pci-bridge latency=0
       resources: irq:18 memory:c1200000-c1207fff memory:c1000000-c11fffff
peppermint@peppermint ~ $ iwconfig
lo        no wireless extensions.

peppermint@peppermint ~ $ ifconfig
lo        Link encap:Local Loopback 
          inet addr:  Mask:
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:496 errors:0 dropped:0 overruns:0 frame:0
          TX packets:496 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:39504 (39.5 KB)  TX bytes:39504 (39.5 KB)

peppermint@peppermint ~ $ sudo iwlist scan
lo        Interface doesn't support scanning.

peppermint@peppermint ~ $ rfkill list
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
peppermint@peppermint ~ $

Networking / Re: New Macbook Air Wifi Adapter Issue
« on: April 17, 2018, 07:58:37 am »
At the moment I'm unable to comply since I have no way to connect to the internet.  There is no ethernet connection on this machine and wifi does not work.  I may try to get an ethernet to usb adapter but that will take some time.   :-\   Thanks for trying to help.

Networking / New Macbook Air Wifi Adapter Issue - SOLVED
« on: April 16, 2018, 07:06:21 pm »
I'm trying to run Peppermint 8 respin from a live usb, however, the system does not see any wifi networks at all.  :(  The Macbook Air has a broadcom BCM 4360 wifi adapter.  Is it possible to get a driver to make this wifi adapter operate?  If so, please advise how this is done.  Thanks.

General Discussion / Re: Multiple Logins and Thunderbird
« on: March 04, 2018, 02:21:19 pm »
Hi Perknh,

Not sure what login you mean.  I use Thunderbird all time and once installed you don't have to login at all.  You just have to set up your email accounts and enter the Login ID and Password at time of setup, and after that the login is automatic for the email accounts you have set up.  If you give me a more specific idea of your problem I'll be glad to help further.  Jeff

General Discussion / Re: Birthday Greetings.
« on: February 14, 2018, 09:46:38 pm »
Happy Birthday PCNetSpec, Slim, and Graeme.  Just getting better with age!!   ;D

Announcements / Re: Annnouncement - New Trusted User
« on: January 27, 2018, 10:50:00 am »
Welcome pin.  Great work!

Announcements / Re: Peppermint 8 Respin Released
« on: December 08, 2017, 10:49:53 am »
Great job as always.  :)

General Discussion / Re: Printer Driver installed...!
« on: December 07, 2017, 11:15:42 am »
That's great!  :)

On my windows 10 machine FireFox 57 will not print a browser page.  It starts the printer but a blank page comes out.  I don't have a printer hooked to my Peppermint 8 machine so I don't know if it's a windows issue.  I moved back to Firefox 56.02 on my windows machine it prints correctly again.  To me it looks there is a bug in the printing area of version 57 for windows. 

I have the iphone SE and really like it.  For me the slightly smaller size is nice.  It is so much faster than the iphone 5 I used to have and I got 64 gb which gives a lot of space.  I would recommend it.

New Users / Re: Messages
« on: November 12, 2017, 09:04:26 am »
I tried this change on my Peppermint 8 system, and I still saw the kernel messages with the Peppermint 7 splash screen.   :-\


New Users / Re: Messages
« on: November 11, 2017, 09:39:24 am »
Sorry, but I don't remember seeing this in Peppermint 7.  Not sure about the respin. :-\

New Users / Re: Messages
« on: November 10, 2017, 10:26:39 pm »
I don't remember seeing this on Peppermint 7.  Below is the info you requested.

Code: [Select]
jlschwartz@jls-pm8 ~ $ inxi -Fz
System:    Host: jls-pm8 Kernel: 4.10.0-38-generic x86_64 (64 bit) Desktop: N/A
           Distro: Peppermint Eight
Machine:   System: Dell (portable) product: Latitude E6230 v: 01
           Mobo: Dell model: 003HX5 v: A00 Bios: Dell v: A18 date: 05/08/2017
CPU:       Dual core Intel Core i5-3340M (-HT-MCP-) cache: 3072 KB
           clock speeds: max: 3400 MHz 1: 3199 MHz 2: 3366 MHz 3: 3199 MHz
           4: 3247 MHz
Graphics:  Card: Intel 3rd Gen Core processor Graphics Controller
           Display Server: X.Org 1.19.3 drivers: (unloaded: fbdev,vesa)
           Resolution: 1366x768@60.22hz
           GLX Renderer: Mesa DRI Intel Ivybridge Mobile
           GLX Version: 3.0 Mesa 17.0.2
Audio:     Card Intel 7 Series/C210 Series Family High Definition Audio Controller
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.10.0-38-generic
Network:   Card-1: Intel 82579LM Gigabit Network Connection driver: e1000e
           IF: eno1 state: down mac: <filter>
           Card-2: Intel Centrino Advanced-N 6205 [Taylor Peak] driver: iwlwifi
           IF: wlp2s0 state: up mac: <filter>
Drives:    HDD Total Size: 500.1GB (8.0% used)
           ID-1: /dev/mmcblk0 model: N/A size: 63.9GB
           ID-2: /dev/sda model: HGST_HTS725050A7 size: 500.1GB
Partition: ID-1: / size: 71G used: 30G (45%) fs: ext4 dev: /dev/sda5
           ID-2: swap-1 size: 8.45GB used: 0.00GB (0%) fs: swap dev: /dev/sda6
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 55.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 192 Uptime: 5 min Memory: 1017.5/7887.5MB
           Client: Shell (bash) inxi: 2.2.35

New Users / Re: Messages
« on: November 10, 2017, 11:26:57 am »
For your info I see those messages as well during startup, and thought it was normal for P8.   :-\

Pages: 1 2 [3] 4 5 ... 15