Messages

1

Hardware / Re: New SSD Slower Than Mechanical Drive

« on: November 22, 2019, 10:13:51 am »

Thanks for all the ideas.  It turns out the UUID for the swap partition was not the same as blkid.  I changed that and it made a huge difference.    I think I'm ok now.  For what it's worth, Clonezilla was used to clone the drive.  This is an old Lenovo x130e laptop that only has Sata II so it will never be as fast as Sata III but at least it's a bit faster.  Before I made this change it took over a minute for the bar to go across on the starting screen.  Now the starting screen flies by.   

2

Hardware / New SSD Slower Than Mechanical Drive [SOLVED]

« on: November 21, 2019, 09:12:17 pm »

I just installed a new Crucial SSD cloned from a mechanical drive with Peppermint 10.  It seems run slower than my old drive.  Any thoughts how to speed it up?  Thanks.  See my system specs:

Code: [Select]

[code]
System:    Host: jls-X130e-P10 Kernel: 5.0.0-36-generic x86_64 bits: 64 gcc: 7.4.0
           Desktop: N/A Distro: Peppermint Ten
Machine:   Device: laptop System: LENOVO product: 062223U v: ThinkPad X130e serial: N/A
           Mobo: LENOVO model: 062223U serial: N/A
           UEFI [Legacy]: LENOVO v: 8RET54WW (1.17 ) date: 10/24/2012
Battery    BAT1: charge: 43.9 Wh 100.0% condition: 43.9/57.7 Wh (76%)
           model: LGC 42T4961 status: Charging
CPU:       Dual core AMD E-450 APU with Radeon HD Graphics (-MCP-)
           arch: Bobcat rev.0 cache: 512 KB
           flags: (lm nx sse sse2 sse3 sse4a ssse3 svm) bmips: 6585
           clock speeds: max: 1650 MHz 1: 1646 MHz 2: 1317 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Wrestler [Radeon HD 6320]
           bus-ID: 00:01.0
           Display Server: x11 (X.Org 1.20.4 )
           drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
           Resolution: 1366x768@60.02hz
           OpenGL: renderer: AMD PALM (DRM 2.50.0 / 5.0.0-36-generic, LLVM 8.0.0)
           version: 3.3 Mesa 19.0.8 Direct Render: Yes
Audio:     Card-1 Advanced Micro Devices [AMD/ATI] Wrestler HDMI Audio
           driver: snd_hda_intel bus-ID: 00:01.1
           Card-2 Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA)
           driver: snd_hda_intel bus-ID: 00:14.2
           Sound: Advanced Linux Sound Architecture v: k5.0.0-36-generic
Network:   Card-1: Realtek RTL8188CE 802.11b/g/n WiFi Adapter
           driver: rtl8192ce port: 3000 bus-ID: 01:00.0
           IF: wlp1s0 state: up mac: <filter>
           Card-2: Qualcomm Atheros AR8151 v2.0 Gigabit Ethernet
           driver: atl1c v: 1.0.1.1-NAPI port: 2000 bus-ID: 02:00.0
           IF: enp2s0 state: down mac: <filter>
Drives:    HDD Total Size: 500.1GB (3.9% used)
           ID-1: /dev/sda model: CT500MX500SSD1 size: 500.1GB
Partition: ID-1: / size: 86G used: 18G (23%) fs: ext4 dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 60.0C mobo: 0.0C gpu: 61.0
           Fan Speeds (in rpm): cpu: 569
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://mirrors.rit.edu/ubuntu/ bionic restricted main
           deb http://mirrors.rit.edu/ubuntu/ bionic-updates restricted main
           deb http://mirrors.rit.edu/ubuntu/ bionic universe
           deb http://mirrors.rit.edu/ubuntu/ bionic-updates universe
           deb http://mirrors.rit.edu/ubuntu/ bionic multiverse
           deb http://mirrors.rit.edu/ubuntu/ bionic-updates multiverse
           deb http://mirrors.rit.edu/ubuntu/ bionic-backports restricted universe multiverse main
           deb http://archive.canonical.com/ubuntu bionic partner
           deb http://mirrors.rit.edu/ubuntu/ bionic-security restricted main
           deb http://mirrors.rit.edu/ubuntu/ bionic-security universe
           deb http://mirrors.rit.edu/ubuntu/ bionic-security multiverse
           Active apt sources in file: /etc/apt/sources.list.d/peppermint.list
           deb http://ppa.launchpad.net/peppermintos/p10-release/ubuntu bionic main
           Active apt sources in file: /etc/apt/sources.list.d/teejee2008-ubuntu-ppa-bionic.list
           deb http://ppa.launchpad.net/teejee2008/ppa/ubuntu bionic main
Info:      Processes: 176 Uptime: 32 min Memory: 1384.9/7571.8MB
           Init: systemd runlevel: 5 Gcc sys: 7.4.0
           Client: Shell (bash 4.4.201) inxi: 2.3.56

Code: [Select]

3

Announcements / Re: Announcement - New Trusted User (clatterfordslim)

« on: November 18, 2019, 11:43:44 am »

Congratulations Slim. 

4

Software & Applications / Re: Some videos not playing on Opera

« on: October 28, 2019, 04:10:26 pm »

My only suggestion is switch to Firefox.

5

General Discussion / Re: Installed Peppermint 10 and loving it!!!

« on: October 17, 2019, 10:23:38 am »

Welcome jpandd! 

6

Software & Applications / Re: Financial program Skrooge

« on: October 13, 2019, 10:26:04 am »

windrose,

I believe Peppermint 10 is based on Ubuntu Bionic Beaver.  Xenial is an older release of Ubuntu which I believe Peppermint 8 was based on.  I have no idea what Linux Mint is based on.  Suggest you switch to Peppermint 10 and problem solved. 

7

General Discussion / Re: Maybe it's just my take on things

« on: September 26, 2019, 10:05:13 am »

I totally agree with Zebedeeboss.

Regards,
Jeff

8

General Discussion / Re: New Pepperminter Here

« on: August 04, 2019, 12:21:57 pm »

Welcome DaveVM 

9

Software & Applications / Re: Problems Installing Peppermint Office and Photography Packs 32 bit Peppermint 10

« on: July 24, 2019, 07:38:24 pm »

Not sure what happened, but when I install the office pack from the command line it installs with no problems at all.  Apparently, the issue is just with the software manager install. 

Thanks for your help.  I'll just avoid the the Photography Pack for now. 

10

Software & Applications / Problems Installing Peppermint Office and Photography Packs 32 bit Peppermint 10

« on: July 24, 2019, 05:34:21 pm »

The Pepperment Office Pack give an error: An Unhandlable error occurred.  There seems to be a programming error in the apt daemon.  Under details if shows Freedesktop.dbus. error.noreply: Did not receive a reply.

On the Photography Pack the error indicates that Package Dependencies cannot be resolved.  The error could be caused by required additional software packages which are missing or not installable.  Under details it says Peppermint-photography-pack: Depends: Darktable but it is not going to be installed. 

This is on a new install of Peppermint 10 32 bit on an Acer Aspire One AOA-150.

Thanks.

11

New Users / Re: Linux Mint user, thinking of converting to Peppermint

« on: July 09, 2019, 08:23:21 pm »

A big welcome to the new Mint users.  You'll love Peppermint.   

12

General Discussion / Re: Martin Wimpress tweet "ZebedeeBoss trying biscuits and gravy for the first time"

« on: June 19, 2019, 10:22:55 am »

So glad that Zeb is enjoying the USA.

13

Artwork, Themes, and Icons / Re: Peppermint 10 Winblows 10 Edition

« on: June 03, 2019, 05:13:44 pm »

Very good!

14

General Discussion / Re: The 'obligatory' forum members Introduction topic

« on: April 15, 2019, 11:51:21 am »

Welcome to the Forum. 

15

General Discussion / Re: BEST Distribution EVER !!

« on: March 10, 2019, 10:15:18 am »

Welcome valiii1313.