Messages

1

New Users / Re: .sh files won't run

« on: August 01, 2019, 05:45:14 pm »

right okay just did a recheck of my glxinfo and it now on 19.02 but i not sure if i can get the drivers for my laptop as it use to run windows till it lagged out for me i keep digging myself

2

New Users / Re: .sh files won't run

« on: August 01, 2019, 05:35:02 pm »

so I tryed the install.sh nd that worked just it went to my home folder and installed the firestorm viewer application under internet but when i click on it nothing opens it like the .sh file for firesstorm is dening access the file is set to executable so I am still struggling on this and i am useing peppermint os 10 not 9

3

New Users / Re: .sh files won't run

« on: July 31, 2019, 01:11:52 pm »

it was a fresh install and it all updated nd upgraded

4

New Users / Re: .sh files won't run

« on: July 30, 2019, 03:09:51 pm »

from the inxi -Fz

raven@raven-IOTA2320 ~ $ inxi -Fz
System:    Host: raven-IOTA2320 Kernel: 4.18.0-25-generic x86_64 bits: 64
           Desktop: N/A Distro: Peppermint Ten
Machine:   Device: desktop System: iOTA product: IOTA2320 serial: N/A
           Mobo: N/A model: N/A serial: N/A
           UEFI: American Megatrends v: HW-BI-14-S133AR120-AA34J-009-A date: 11/06/2017
CPU:       Quad core Intel Pentium N4200 (-MCP-) cache: 1024 KB
           clock speeds: max: 2500 MHz 1: 704 MHz 2: 734 MHz 3: 867 MHz 4: 865 MHz
Graphics:  Card: Intel Celeron N3350/Pentium N4200/Atom E3900 Series Integrated Graphics Controller
           Display Server: x11 (X.Org 1.20.1 )
           drivers: modesetting (unloaded: fbdev,vesa)
           Resolution: 1920x1080@57.31hz
           OpenGL: renderer: Mesa DRI Intel HD Graphics 505 (Broxton)
           version: 4.5 Mesa 18.2.8
Audio:     Card Intel Celeron N3350/Pentium N4200/Atom E3900 Series Audio Cluster
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.18.0-25-generic
Network:   Card: Intel Wireless 3165 driver: iwlwifi
           IF: wlp1s0 state: up mac: <filter>
Drives:    HDD Total Size: NA (-)
           ID-1: /dev/mmcblk0 model: N/A size: 31.3GB
Partition: ID-1: / size: 29G used: 7.3G (28%) fs: ext4 dev: /dev/mmcblk0p2
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 32.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 196 Uptime: 1:03 Memory: 719.6/3778.0MB
           Client: Shell (bash) inxi: 2.3.56

And the glxinfo

raven@raven-IOTA2320 ~ $ glxinfo | grep "OpenGL version"
OpenGL version string: 3.0 Mesa 18.2.8

5

New Users / Re: .sh files won't run

« on: July 30, 2019, 03:06:36 pm »

oh sorry i didnt mean to i do it in terminal in the same folder right

6

New Users / Re: .sh files won't run

« on: July 30, 2019, 01:13:04 pm »

7

New Users / Re: .sh files won't run

« on: July 30, 2019, 01:05:37 pm »

when i load it in terminal it goes off fast and i get from this link

https://www.firestormviewer.org/linux/

8

New Users / .sh files won't run

« on: July 29, 2019, 07:38:02 pm »

so i downloaded a program that is a .sh file i folowed it command to execute it as an executable file double clicked it hit run nothing happens can you tell me what  i did wrong

9

New Users / Re: mouse pad issue

« on: June 02, 2019, 08:03:33 pm »

Your touchpad is #9. If you run this command, you'll get more details about that device's properties:

Code: [Select]

$ xinput list-props 9
This is what my touchpad (#11 for me) looks like. I have mine disabled. But, maybe some other properties might stand out as different.

Code: [Select]

$ xinput list-props 11
Device 'SynPS/2 Synaptics TouchPad':
Device Enabled (148): 0
Coordinate Transformation Matrix (150): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (278): 1
Device Accel Constant Deceleration (279): 2.000000
Device Accel Adaptive Deceleration (280): 1.000000
Device Accel Velocity Scaling (281): 12.500000
Synaptics Edges (303): 1511, 5433, 1272, 4602
Synaptics Finger (304): 25, 30, 0
Synaptics Tap Time (305): 180
Synaptics Tap Move (306): 263
Synaptics Tap Durations (307): 180, 180, 100
Synaptics ClickPad (308): 0
Synaptics Middle Button Timeout (309): 75
Synaptics Two-Finger Pressure (310): 282
Synaptics Two-Finger Width (311): 7
Synaptics Scrolling Distance (312): 119, 119
Synaptics Edge Scrolling (313): 1, 1, 1
Synaptics Two-Finger Scrolling (314): 1, 1
Synaptics Move Speed (315): 1.000000, 2.000000, 0.075000, 0.000000
Synaptics Off (316): 0
Synaptics Locked Drags (317): 0
Synaptics Locked Drags Timeout (318): 5000
Synaptics Tap Action (319): 0, 9, 0, 8, 1, 2, 3
Synaptics Click Action (320): 1, 1, 1
Synaptics Circular Scrolling (321): 1
Synaptics Circular Scrolling Distance (322): 0.100000
Synaptics Circular Scrolling Trigger (323): 7
Synaptics Circular Pad (324): 0
Synaptics Palm Detection (325): 0
Synaptics Palm Dimensions (326): 10, 200
Synaptics Coasting Speed (327): 8.000000, 50.000000
Synaptics Pressure Motion (328): 30, 160
Synaptics Pressure Motion Factor (329): 1.000000, 1.000000
Synaptics Grab Event Device (330): 0
Synaptics Gestures (331): 1
Synaptics Capabilities (332): 1, 0, 1, 1, 1, 1, 1
Synaptics Pad Resolution (333): 77, 51
Synaptics Area (334): 0, 0, 0, 0
Synaptics Noise Cancellation (335): 8, 8
Device Product ID (270): 2, 7
Device Node (271): "/dev/input/event7"
You can set those properties with this command, for example:

Code: [Select]

$ xinput set-prop 9 "Device Enabled" 0

That's the command I use to disable my touchpad (which is #11. Yours is #9).

FWIW: there is also a "synclient" command which might be easier to work with. My synclient output is:

Code: [Select]

$ synclient
Parameter settings:
    LeftEdge                = 1511
    RightEdge               = 5433
    TopEdge                 = 1272
    BottomEdge              = 4602
    FingerLow               = 25
    FingerHigh              = 30
    MaxTapTime              = 180
    MaxTapMove              = 263
    MaxDoubleTapTime        = 180
    SingleTapTimeout        = 180
    ClickTime               = 100
    EmulateMidButtonTime    = 75
    EmulateTwoFingerMinZ    = 282
    EmulateTwoFingerMinW    = 7
    VertScrollDelta         = 119
    HorizScrollDelta        = 119
    VertEdgeScroll          = 1
    HorizEdgeScroll         = 1
    CornerCoasting          = 1
    VertTwoFingerScroll     = 1
    HorizTwoFingerScroll    = 1
    MinSpeed                = 1
    MaxSpeed                = 2
    AccelFactor             = 0.075
    TouchpadOff             = 0
    LockedDrags             = 0
    LockedDragTimeout       = 5000
    RTCornerButton          = 0
    RBCornerButton          = 9
    LTCornerButton          = 0
    LBCornerButton          = 8
    TapButton1              = 1
    TapButton2              = 2
    TapButton3              = 3
    ClickFinger1            = 1
    ClickFinger2            = 1
    ClickFinger3            = 1
    CircularScrolling       = 1
    CircScrollDelta         = 0.1
    CircScrollTrigger       = 7
    CircularPad             = 0
    PalmDetect              = 0
    PalmMinWidth            = 10
    PalmMinZ                = 200
    CoastingSpeed           = 8
    CoastingFriction        = 50
    PressureMotionMinZ      = 30
    PressureMotionMaxZ      = 160
    PressureMotionMinFactor = 1
    PressureMotionMaxFactor = 1
    GrabEventDevice         = 0
    TapAndDragGesture       = 1
    AreaLeftEdge            = 0
    AreaRightEdge           = 0
    AreaTopEdge             = 0
    AreaBottomEdge          = 0
    HorizHysteresis         = 8
    VertHysteresis          = 8
    ClickPad                = 0
Some of those settings are documented at: https://wiki.archlinux.org/index.php/Touchpad_Synaptics

There is a package named "touchpad-indicator" which you can install with "sudo apt-get install touchpad-indicator". That might give you some configurability. (I haven't installed this package in years. I don't use Peppermint at the moment, I'm planning to try it soon. In theory it should be ok to install that package. But... I don't know for sure.).

Okay the touchpad indicator no longer exist in peppermint maybe they took that off and this is what i got on my prop 9

Device 'SYNA3602:00 0911:5288 Touchpad':
   Device Enabled (141):   1
   Coordinate Transformation Matrix (143):   1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
   Device Accel Profile (268):   1
   Device Accel Constant Deceleration (269):   2.500000
   Device Accel Adaptive Deceleration (270):   1.000000
   Device Accel Velocity Scaling (271):   12.500000
   Synaptics Edges (272):   56, 1363, 55, 968
   Synaptics Finger (273):   25, 30, 0
   Synaptics Tap Time (274):   180
   Synaptics Tap Move (275):   76
   Synaptics Tap Durations (276):   180, 180, 100
   Synaptics ClickPad (277):   1
   Synaptics Middle Button Timeout (278):   0
   Synaptics Two-Finger Pressure (279):   282
   Synaptics Two-Finger Width (280):   7
   Synaptics Scrolling Distance (281):   34, 34
   Synaptics Edge Scrolling (282):   0, 0, 0
   Synaptics Two-Finger Scrolling (283):   1, 1
   Synaptics Move Speed (284):   1.000000, 1.750000, 0.114351, 0.000000
   Synaptics Off (285):   0
   Synaptics Locked Drags (286):   0
   Synaptics Locked Drags Timeout (287):   5000
   Synaptics Tap Action (288):   2, 3, 0, 0, 1, 3, 0
   Synaptics Click Action (289):   1, 1, 0
   Synaptics Circular Scrolling (290):   0
   Synaptics Circular Scrolling Distance (291):   0.100000
   Synaptics Circular Scrolling Trigger (292):   0
   Synaptics Circular Pad (293):   0
   Synaptics Palm Detection (294):   0
   Synaptics Palm Dimensions (295):   10, 200
   Synaptics Coasting Speed (296):   20.000000, 50.000000
   Synaptics Pressure Motion (297):   30, 160
   Synaptics Pressure Motion Factor (298):   1.000000, 1.000000
   Synaptics Resolution Detect (299):   1
   Synaptics Grab Event Device (300):   0
   Synaptics Gestures (301):   1
   Synaptics Capabilities (302):   1, 0, 1, 1, 1, 0, 0
   Synaptics Pad Resolution (303):   14, 14
   Synaptics Area (304):   0, 0, 0, 0
   Synaptics Soft Button Areas (305):   709, 0, 838, 0, 0, 0, 0, 0
   Synaptics Noise Cancellation (306):   8, 8
   Device Product ID (263):   2321, 21128
   Device Node (264):   "/dev/input/event7"

10

New Users / Re: mouse pad issue

« on: May 04, 2019, 06:44:09 am »

Hi M3TWJ,

Try these commands (found here) in a terminal and tell us if the touchpad responds normally (it is supposed to work immediately after running the commands, but the changes do not survive a reboot):

Code: [Select]

sudo -i
echo 'on' > /sys/bus/i2c/devices/i2c-SYNA3602\:00/power/control
rmmod i2c_hid
modprobe i2c_hid
If it does, maybe PCNetSpec can tell you how to make the changes survive a reboot.

Regards,

-- Slim

Okay i try that when I get back thank you for helping me on this

11

New Users / Re: mouse pad issue

« on: May 04, 2019, 06:23:08 am »

for the first one

inxi -Fz

System:    Host: m3twj Kernel: 4.15.0-48-generic x86_64 bits: 64 Desktop: N/A
           Distro: Peppermint Nine
Machine:   Device: desktop System: iOTA product: IOTA2320 serial: N/A
           Mobo: N/A model: N/A serial: N/A
           UEFI: American Megatrends v: HW-BI-14-S133AR120-AA34J-009-A date: 11/06/2017
CPU:       Quad core Intel Pentium N4200 (-MCP-) cache: 1024 KB
           clock speeds: max: 2500 MHz 1: 2387 MHz 2: 2386 MHz 3: 2383 MHz
           4: 2378 MHz
Graphics:  Card: Intel Celeron N3350/Pentium N4200/Atom E3900 Series Integrated Graphics Controller
           Display Server: x11 (X.Org 1.19.6 )
           drivers: modesetting (unloaded: fbdev,vesa)
           Resolution: 1920x1080@57.31hz
           OpenGL: renderer: Mesa DRI Intel HD Graphics 505 (Broxton)
           version: 4.5 Mesa 18.2.8
Audio:     Card Intel Celeron N3350/Pentium N4200/Atom E3900 Series Audio Cluster
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.15.0-48-generic
Network:   Card: Intel Wireless 3165 driver: iwlwifi
           IF: wlp1s0 state: up mac: <filter>
Drives:    HDD Total Size: NA (-)
           ID-1: /dev/mmcblk0 model: N/A size: 31.3GB
Partition: ID-1: / size: 29G used: 7.7G (29%) fs: ext4 dev: /dev/mmcblk0p2
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 31.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 281 Uptime: 16:31 Memory: 1752.4/3778.2MB
           Client: Shell (bash) inxi: 2.3.56

now for the second one

xinput --list

m3twj@m3twj ~ $ xinput --list
⎡ Virtual core pointer                       id=2   [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                 id=4   [slave  pointer  (2)]
⎜   ↳ SYNA3602:00 0911:5288 Touchpad             id=9   [slave  pointer  (2)]
⎜   ↳ Razer Razer Naga Hex V2                    id=13   [slave  pointer  (2)]
⎜   ↳ Razer Razer Naga Hex V2                    id=14   [slave  pointer  (2)]
⎣ Virtual core keyboard                      id=3   [master keyboard (2)]
    ↳ Virtual core XTEST keyboard                id=5   [slave  keyboard (3)]
    ↳ Video Bus                                  id=6   [slave  keyboard (3)]
    ↳ Power Button                               id=7   [slave  keyboard (3)]
    ↳ USB 2.0 Web Camera: USB 2.0 Web            id=8   [slave  keyboard (3)]
    ↳ Intel HID events                           id=10   [slave  keyboard (3)]
    ↳ Intel HID 5 button array                   id=11   [slave  keyboard (3)]
    ↳ AT Translated Set 2 keyboard               id=12   [slave  keyboard (3)]
    ↳ Razer Razer Naga Hex V2                    id=15   [slave  keyboard (3)]

12

New Users / mouse pad issue

« on: May 03, 2019, 06:52:50 pm »

Hi ll i new to peppermint i only got it installed less than 24 hours due to my laptop it self was slow on windows alone so everything was fine with the installation but when i try and click on something on my touchpad the clicks don't respond.  or if i want to drag  the size of the program bigger or next to my other program the clicks does not reconised by the os it self only if i double tap on my touchpad it responds but in a weird way.  I was wondering if there a fix for this incase you want to know specs of the laptop itself then i post it below i am useing the latest peppermint i belive 9 is the latest one

Brand name   iOTA
Item Weight   1.33 Kg
Product Dimensions   22.2 x 33.2 x 1 cm
Batteries:   1 Lithium ion batteries required. (included)
Item model number   IO031
Series   SLIM
Color   Silver
Form Factor   UltraThin
Screen Size   35.8 centimetres
Screen Resolution   1920 x 1080 pixels
Maximum Display Resolution   1920 x 1080 pixels
Processor Brand   Intel®
Processor Type   Pentium N4200
Processor Speed   1100 MHz
Processor Count   4
RAM Size   4 GB
Hard Drive Size   32 GB
Hard Disk Technology   eMMC
Graphics Card Description   HD Graphics 505
Operating System   Windows 10
Supported Software   Microsoft
Lithium Battery Energy Content   1 watt_hours
Lithium Battery Packaging   Batteries contained in equipment
Lithium Battery Weight   1 Grams
Number Of Lithium Ion Cells   1