Choose style:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - sanguinemoon

Pages: [1] 2 3 ... 6
1
New Users / Re: Connecting LG Stylo via USB
« on: February 17, 2016, 02:36:30 am »
With USB debugging switched on .. what happens if you disable MTP on the phone ?
I can use PTD to transfer files, but the computer can't see the microsd card
Quote
Or maybe take a look at this:
http://forum.xda-developers.com/lg-g3/general/guide-connecting-lg-g3-to-linux-adb-aka-t2821673
I get the same results.

2
New Users / Re: Connecting LG Stylo via USB
« on: February 16, 2016, 12:11:02 am »
It didn't work. :( The computer sees the phone and it shows up in Nemo. I can briefly see the phone's files, but than I get a message "The folder contents could not be displayed.  No such interface 'org.gtk.vfs.Mount' on object at path /org/gtk/vfs/mount/1" But I discovered that I can copy files over through PTP  but not MT, even though the phone claims that just for pictures. LG says the MTP driver is dependent on Windows Media Player, which I wouldn't use even if I switched back to Windows for some reason, such as having gone completely insane  ::)

I did:

Code: [Select]
 dmesg | grep -i usb
[    0.201997] ACPI: bus type USB registered
[    0.202017] usbcore: registered new interface driver usbfs
[    0.202026] usbcore: registered new interface driver hub
[    0.202077] usbcore: registered new device driver usb
[    2.689705] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.689829] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[    2.701064] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    2.701133] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.701135] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.701137] usb usb1: Product: EHCI Host Controller
[    2.701138] usb usb1: Manufacturer: Linux 3.16.0-60-generic ehci_hcd
[    2.701140] usb usb1: SerialNumber: 0000:00:02.1
[    2.701304] hub 1-0:1.0: USB hub found
[    2.701626] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.701724] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[    2.759093] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.759096] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.759098] usb usb2: Product: OHCI PCI host controller
[    2.759100] usb usb2: Manufacturer: Linux 3.16.0-60-generic ohci_hcd
[    2.759101] usb usb2: SerialNumber: 0000:00:02.0
[    2.759269] hub 2-0:1.0: USB hub found
[    2.759590] uhci_hcd: USB Universal Host Controller Interface driver
[    3.272985] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    3.406588] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608
[    3.406593] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.406594] usb 1-2: Product: USB2.0 Hub
[    3.407038] hub 1-2:1.0: USB hub found
[    4.100867] usb 2-1: new full-speed USB device number 2 using ohci-pci
[    4.322889] usb 2-1: New USB device found, idVendor=046d, idProduct=c52b
[    4.322894] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.322896] usb 2-1: Product: USB Receiver
[    4.322897] usb 2-1: Manufacturer: Logitech
[    4.351966] usbcore: registered new interface driver usbhid
[    4.351970] usbhid: USB HID core driver
[    4.359006] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-1/input2
[    4.416224] input: Logitech Unifying Device. Wireless PID:4004 as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input5
[    4.416299] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4004] on usb-0000:00:02.0-1:1
[    4.632795] usb 2-4: new full-speed USB device number 3 using ohci-pci
[    4.854811] usb 2-4: New USB device found, idVendor=046d, idProduct=c52f
[    4.854815] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.854817] usb 2-4: Product: USB Receiver
[    4.854819] usb 2-4: Manufacturer: Logitech
[    4.875024] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.0/0003:046D:C52F.0005/input/input6
[    4.875284] hid-generic 0003:046D:C52F.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-4/input0
[    4.878918] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-4/2-4:1.1/0003:046D:C52F.0006/input/input7
[    4.879221] hid-generic 0003:046D:C52F.0006: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.0-4/input1
[    4.944753] usb 1-2.1: new full-speed USB device number 5 using ehci-pci
[    5.038602] usb 1-2.1: New USB device found, idVendor=03f0, idProduct=0d17
[    5.038607] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.038609] usb 1-2.1: Product: hp LaserJet 1012
[    5.038611] usb 1-2.1: Manufacturer: Hewlett-Packard
[    5.038612] usb 1-2.1: SerialNumber: 00CNFB032590
[    5.108864] usb 1-2.4: new high-speed USB device number 6 using ehci-pci
[    5.202972] usb 1-2.4: New USB device found, idVendor=0930, idProduct=6544
[    5.202976] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.202978] usb 1-2.4: Product: TransMemory     
[    5.202980] usb 1-2.4: Manufacturer: TOSHIBA
[    5.202982] usb 1-2.4: SerialNumber: ECA86B2440D7CF31F9AC9459
[    5.206260] usb-storage 1-2.4:1.0: USB Mass Storage device detected
[    5.206500] scsi4 : usb-storage 1-2.4:1.0
[    5.206577] usbcore: registered new interface driver usb-storage
[    5.208174] usbcore: registered new interface driver uas
[   15.243430] usblp 1-2.1:1.0: usblp2: USB Bidirectional printer dev 5 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0D17
[   15.244049] usbcore: registered new interface driver usblp
[45266.937026] usb 1-2.3: new high-speed USB device number 7 using ehci-pci
[45267.031301] usb 1-2.3: New USB device found, idVendor=1004, idProduct=633e
[45267.031314] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[45267.031322] usb 1-2.3: Product: LGE Android Phone
[45267.031328] usb 1-2.3: Manufacturer: LG Electronics Inc.
[45267.031333] usb 1-2.3: SerialNumber: LGH6313403c6a9
[45293.539338] usb 1-2.3: usbfs: process 6403 (events) did not claim interface 0 before use
[45317.498242] usb 1-2.3: usbfs: process 6424 (events) did not claim interface 0 before use
[45321.551565] usb 1-2.3: usbfs: process 6441 (events) did not claim interface 0 before use
[45332.559216] usb 1-2.3: usbfs: process 6462 (events) did not claim interface 0 before use
[45338.757967] usb 1-2.3: usbfs: process 6476 (events) did not claim interface 0 before use
[45349.543209] usb 1-2.3: USB disconnect, device number 7
[45353.070211] usb 1-2.3: new high-speed USB device number 8 using ehci-pci
[45353.165423] usb 1-2.3: New USB device found, idVendor=1004, idProduct=633e
[45353.165436] usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[45353.165443] usb 1-2.3: Product: LGE Android Phone
[45353.165449] usb 1-2.3: Manufacturer: LG Electronics Inc.
[45353.165454] usb 1-2.3: SerialNumber: LGH6313403c6a9
[45358.767067] usb 1-2.3: usbfs: process 6497 (events) did not claim interface 0 before use
[45375.603372] usb 1-2.3: usbfs: process 6523 (events) did not claim interface 0 before use
[45395.124017] events[6542]: segfault at 40 ip 00007f8e2e62bb3f sp 00007f8e267fbbd0 error 4 in libusb-1.0.so.0.1.0[7f8e2e624000+15000]
[45400.582925] usb 1-2.3: usbfs: process 6558 (events) did not claim interface 0 before use
[45414.814047] usb 1-2.3: USB disconnect, device number 8
[45456.581139] usb 1-3: new high-speed USB device number 9 using ehci-pci
[45456.715557] usb 1-3: New USB device found, idVendor=1004, idProduct=633e
[45456.715570] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[45456.715577] usb 1-3: Product: LGE Android Phone
[45456.715583] usb 1-3: Manufacturer: LG Electronics Inc.
[45456.715588] usb 1-3: SerialNumber: LGH6313403c6a9
[45486.840055] usb 1-3: usbfs: process 6586 (events) did not claim interface 0 before use
[45495.389713] usb 1-3: usbfs: process 6604 (events) did not claim interface 0 before use
[45505.097320] usb 1-3: usbfs: process 6632 (events) did not claim interface 0 before use
[45515.919677] usb 1-2.4: USB disconnect, device number 6
[45517.687577] usb 1-3: USB disconnect, device number 9
[45523.796712] usb 1-2.4: new high-speed USB device number 10 using ehci-pci
[45523.890863] usb 1-2.4: New USB device found, idVendor=1004, idProduct=633e
[45523.890876] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[45523.890884] usb 1-2.4: Product: LGE Android Phone
[45523.890890] usb 1-2.4: Manufacturer: LG Electronics Inc.
[45523.890895] usb 1-2.4: SerialNumber: LGH6313403c6a9
[45558.171870] usb 1-2.4: usbfs: process 6666 (events) did not claim interface 0 before use
[45574.791436] usb 1-2.4: USB disconnect, device number 10
[45583.501174] usb 1-2.4: new high-speed USB device number 11 using ehci-pci
[45583.595470] usb 1-2.4: New USB device found, idVendor=1004, idProduct=633e
[45583.595483] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[45583.595491] usb 1-2.4: Product: LGE Android Phone
[45583.595497] usb 1-2.4: Manufacturer: LG Electronics Inc.
[45583.595502] usb 1-2.4: SerialNumber: LGH6313403c6a9
[45596.292429] usb 1-2.4: USB disconnect, device number 11
[45596.491569] usb 1-2.4: new high-speed USB device number 12 using ehci-pci
[45596.585155] usb 1-2.4: New USB device found, idVendor=1004, idProduct=632c
[45596.585168] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[45596.585175] usb 1-2.4: Product: LGE Android Phone
[45596.585181] usb 1-2.4: Manufacturer: LG Electronics Inc.
[45596.585186] usb 1-2.4: SerialNumber: LGH6313403c6a9
[45596.586125] usb-storage 1-2.4:1.0: USB Mass Storage device detected
[45596.586906] scsi5 : usb-storage 1-2.4:1.0
[45627.982130] usb 1-2.4: USB disconnect, device number 12
[45628.187544] usb 1-2.4: new high-speed USB device number 13 using ehci-pci
[45628.281590] usb 1-2.4: New USB device found, idVendor=1004, idProduct=633e
[45628.281603] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[45628.281610] usb 1-2.4: Product: LGE Android Phone
[45628.281617] usb 1-2.4: Manufacturer: LG Electronics Inc.
[45628.281622] usb 1-2.4: SerialNumber: LGH6313403c6a9
[45630.446178] usb 1-2.4: usbfs: process 6719 (events) did not claim interface 0 before use
[45634.258568] usb 1-2.4: usbfs: process 6735 (events) did not claim interface 0 before use
[45634.400617] usb 1-2.4: usbfs: process 6744 (pool) did not claim interface 0 before use
[45634.474728] usb 1-2.4: reset high-speed USB device number 13 using ehci-pci
[45634.567707] usb 1-2.4: usbfs: process 6744 (pool) did not claim interface 0 before use
[45634.567806] usb 1-2.4: usbfs: process 6736 (banshee) did not claim interface 0 before use
[45634.567817] usb 1-2.4: usbfs: process 6736 (banshee) did not claim interface 0 before use
[45634.567826] usb 1-2.4: usbfs: process 6736 (banshee) did not claim interface 0 before use
[45634.567835] usb 1-2.4: usbfs: process 6736 (banshee) did not claim interface 0 before use
[45634.567843] usb 1-2.4: usbfs: process 6736 (banshee) did not claim interface 0 before use
[45634.567852] usb 1-2.4: usbfs: process 6736 (banshee) did not claim interface 0 before use
[45634.567860] usb 1-2.4: usbfs: process 6736 (banshee) did not claim interface 0 before use
[45634.567868] usb 1-2.4: usbfs: process 6736 (banshee) did not claim interface 0 before use
[45634.567876] usb 1-2.4: usbfs: process 6736 (banshee) did not claim interface 0 before use
[45634.567956] usb 1-2.4: usbfs: process 6736 (banshee) did not claim interface 0 before use
[45638.689581] usb 1-2.4: usbfs: process 6736 (banshee) did not claim interface 0 before use
[45639.263831] usb 1-2.4: usbfs: process 6152 (banshee) did not claim interface 0 before use
[45639.263871] usb 1-2.4: usbfs: process 6152 (banshee) did not claim interface 0 before use
[45639.263900] usb 1-2.4: usbfs: process 6152 (banshee) did not claim interface 0 before use
[45641.954727] usb 1-2.4: usbfs: process 6747 (events) did not claim interface 0 before use
[45642.285543] usb 1-2.4: usbfs: process 6761 (events) did not claim interface 0 before use
[45646.414359] usb 1-2.4: usbfs: process 6775 (events) did not claim interface 0 before use
[45806.396571] usb 1-2.4: usbfs: process 6844 (events) did not claim interface 0 before use
[45809.121127] usb 1-2.4: usbfs: process 6856 (pool) did not claim interface 0 before use
[45809.192794] usb 1-2.4: reset high-speed USB device number 13 using ehci-pci
[45809.285804] usb 1-2.4: usbfs: process 6856 (pool) did not claim interface 0 before use
[45809.285855] usb 1-2.4: usbfs: process 6152 (banshee) did not claim interface 0 before use
[45809.285914] usb 1-2.4: usbfs: process 6152 (banshee) did not claim interface 0 before use
[45809.285945] usb 1-2.4: usbfs: process 6152 (banshee) did not claim interface 0 before use
[45810.531066] usb 1-2.4: usbfs: process 6860 (events) did not claim interface 0 before use




3
New Users / Connecting LG Stylo via USB
« on: February 14, 2016, 07:54:43 pm »
My new LG Stylo  arrived a couple days ago  ;D I tried to connect it to my computer so I could transfer some files over to the microSD card, but the phone wants me install USB drivers and I'm not sure how to do this. I was hoping and kind of expecting the computer to see the phone and microsd card as just another drive  :P

4
Artwork, Themes, and Icons / Re: Yet Another Wallaper
« on: February 09, 2016, 06:44:47 am »
Very trippy  ;D!!
It is indeed. Running off with even now

5
General Discussion / Re: Peppermint vs Linux Lite (Lxde vs Xfce)
« on: February 09, 2016, 06:37:59 am »
That would work, but to keep the system light as possible, I just did XFCE4-panel along with the Whisker Menu. It doesn't pull as many XFCE dependencies as you might think. But you're running PM with the XFCE Panel and Whisker, you'll need change change the workspace manger back to "peppermint-control-center" and the Quit Manager back to "lxsession-logout" if you want to use the settings icon and log out through the Whisker Menu. Otherwise, you'll wind up installing a bunch of redundant stuff you don't need.

6
I wonder if the Windows theme might actually discourage new users, like the "Uncanny Valley" in animation. It looks so close to being Windows but has noticeable off-putting differences. 

7
Artwork, Themes, and Icons / Re: Peppermint Power-Up wallpaper
« on: February 03, 2016, 06:53:49 am »
Hrm, a Peppermint CPU? :D I take it that is superfaster without a lot of unnecessary overhead?

Nice work :)

8
Artwork, Themes, and Icons / New screenshot
« on: February 03, 2016, 06:38:54 am »
I decided to do a fresh, clean install of Peppermint Six . Obviously, I didn't do stupid to stuff to break that last install beyond my ability to fix it. It was obviously a poltergeist that did it.... ;) Before I went with a steampunk look, so this time I decided to something completely different, but equally nefarious.



The windowmanager theme is Ambiance Flat Pink , the widget theme is Ambiance  Flat zFusion Pink. That's from the same ppa, I think. The icons are Vibrancy Dark Pink. I'm not sure where I made off with that wallpaper from  :P

Oh and that's Plank dock on the bottom, but I didn't install the themer. In the top left is a different menu button that I stole from somewhere.

9
Software & Applications / Re: Antivirus in Peppermint 6?
« on: June 09, 2015, 08:36:11 pm »
Hi marcin

If it's a standard installation you have and you're not connected to Windows PC's I would say you don't need Anti Virus software

I've been using Linux distributions of varying varieties for almost 5 years and I've never had any anti virus software installed on any of them and never had any problems

There is anti virus software available for Linux but they're mainly to protect Windows PC's that might be connected to them



Graeme
Oh, I was wondering why there are anti-virus programs for Linux. I guess another scenario would be that if you have files that originated on a  Windows machine, you can go ahead and clean them in Linux.

10
Or just comes here to troll whenever a new release comes out because he has no life is a douchebag :)

11
Advanced Topics / Re: alternate browsers...
« on: June 07, 2015, 10:43:26 am »
.  They've also got a great set of themes now.  But the downside for me has been I've had no luck of getting synchronization to work.  So if you've got two installations of Opera, over time they end up being quite different from each other.

You might need to more patient with it.  When I installed Opera stable, I thought sync was sunk. None of my bookmarks were imported.  :'( But several minutes later, they appeared  :o

12
And the award for the silliest reason for installing and abandoning a distro goes to....

Different users have different requirements, hence the reason for so many of them. Pick the one you like. Whatevs. But because the screenshot doesn't save where you want? I'm surprised you can stay with any distro more then about five minutes :P

13
Artwork, Themes, and Icons / Re: Peppermint Six Theme
« on: June 03, 2015, 11:55:58 am »
That settles it. It's a painting so nothing pervy is happening  :P

14
Artwork, Themes, and Icons / Re: Peppermint Six Theme
« on: June 03, 2015, 07:49:08 am »
She seems very intrigued. So is it merely an old painting or portal to another world...cue spooky music ;)

15
GNU/Linux Gaming / Re: Wine, Windows and Games [SOLVED]
« on: June 03, 2015, 06:25:12 am »
I wrote them a new corporate slogan. Let's see if they'll accept it :)

Logileech , larcenously leeching Linux with lavicious longing for legal tender since 1991 (tm)

Pages: [1] 2 3 ... 6