Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - manchedepelle

Pages: [1]
1
Hardware / Re: creating a bootable BIOS upgrate USB flash drive
« on: November 25, 2020, 08:25:14 pm »
The format of the update is an .iso

2
Hardware / creating a bootable BIOS upgrate USB flash drive
« on: November 24, 2020, 10:21:10 am »
Dear Peppermint friend,


I just received today an old laptop (thinkpad t510) and I need to update the bios for that laptop.  I'm on my main computer (the one with Peppermint OS) and I'm trying to make a bootable flash drive to update my BIOS.. I've try with Balena Etcher and I got a message that ther's no boot table.

I don't know if it's classified in a hardware issue or a software ... but i give a try here


thanks for your help

3
The Omen, you really impressed me !!!


Wish I had learned more about linux when I was in school ... here it's Microsoft product, everywhere ... so we learn computer on microsoft product, works with Microsoft product and pay for Microsoft product without knowing alternative ...

thanks again for your help !!!!

4
WOW the Omen are you a god ???


Now it works perfectly thank you so much for all of you who help me !!!


5
Here the command result (I didn't know that trick ... it might be useful in the future)

System:    Host: jp-HP-Compaq-Elite-8300-SFF Kernel: 5.3.0-62-generic x86_64
           bits: 64 gcc: 7.5.0
           Desktop: N/A Distro: Peppermint Ten
Machine:   Device: desktop System: Hewlett-Packard product: HP Compaq Elite 8300 SFF serial: N/A
           Mobo: Hewlett-Packard model: 3397 serial: N/A
           BIOS: Hewlett-Packard v: K01 v02.98 date: 03/18/2015
CPU:       Quad core Intel Core i5-3470 (-MCP-)
           arch: Ivy Bridge rev.9 cache: 6144 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 25541
           clock speeds: max: 3600 MHz 1: 1597 MHz 2: 1599 MHz 3: 1599 MHz
           4: 1596 MHz
Graphics:  Card: Intel Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller
           bus-ID: 00:02.0
           Display Server: x11 (X.Org 1.20.8 )
           drivers: modesetting (unloaded: fbdev,vesa)
           Resolution: 1920x1080@60.00hz
           OpenGL: renderer: Mesa DRI Intel HD Graphics 2500 (IVB GT1)
           version: 4.2 Mesa 20.0.8 Direct Render: Yes
Audio:     Card Intel 7 Series/C216 Family High Def. Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture v: k5.3.0-62-generic
Network:   Card: Intel 82579LM Gigabit Network Connection (Lewisville)
           driver: e1000e v: 3.2.6-k port: f080 bus-ID: 00:19.0
           IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 1500.3GB (61.2% used)
           ID-1: /dev/sda model: ST500DM002 size: 500.1GB
           ID-2: /dev/sdb model: WDC_WD10EARS size: 1000.2GB
           Optical-1: /dev/sr0 model: hp DVD-ROM SH-116AB
           rev: HF20 dev-links: cdrom,dvd
           Features: speed: 40x multisession: yes
           audio: yes dvd: yes rw: none state: running
Partition: ID-1: / size: 458G used: 27G (7%) fs: ext4 dev: /dev/sda1
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 32.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 192 Uptime: 7 days Memory: 1489.2/3810.3MB
           Init: systemd runlevel: 5 Gcc sys: 7.5.0
           Client: Shell (bash 4.4.201) inxi: 2.3.56



thanks again my friends !!!!

6
thanks alot I


The first solution doesn't solve the problem.


With the youtube testing method, I got what they call screen tearing, you're absolutely right about it !!!  I click on configure new display when connected ... should Idisconnect and reconnect the montior ???


thanks for you help


n.b. I also try to change manually the refresh rate but i go only 60hz ... Also I got an onboard graphic card, so maybe that's why I got bad visual quality

7
Thanks Dave,


I really appreciate your help. It's a step further to success !!!

8
Dear Friends,


I'm new on Linux and before installing that distro I had an older PC that I've tried 3 or 4 distro ... and my final choice was on this one (I really like Peppermint)

On my older computer, I had the same issue than that the one I use ... so it's not an hardware issue that I've got ...

Also, I use another computer with the same monitor, and it's only on my Linux one that I got an issue, and it's only occur while i'm scoling down with the mouse roller a web page.


On my screen it's like a diagonal blurred line that appear like if theres a crack on a glass and it disapear almost immediatly.

I was wondering what could cause that strange effect and if it's possible to correct my problem.  I can lived with it but it's kinda annoying when reading fast a text on a web page.  i don't know if it's a firefox bug (got an update since that I used Peppermint, and nothings change) a driver issue, a not enough strong graphic card (it's onboard on my olde computer that I've try and that one), etc ...

thanks for your support



9
Dear Friends,


I got sometimes issue to remove some software.  I mean, sometime I've installed it from apt, snap or other ways.  But for a software I don't remember where it came from so I'm not able to remove it.  Anybody knows where I can't remove that software or how that I can knows where it came from so I'll be able to remove it ???


Also there is something that I've issue ... I had some issue with a version of software so i've installed it with differents ways where it was available.  Instead of installed the software over it, the same software was on my computer 2 or 3 times (once with apt, one with the software store, one with another way that I don't remembered ...)

So I've found out that the software folder isn't the same way that Windows manage it (I'm a new comer here on Linux, that's kinda different from Windows that i'm used to uses since 20 years ...)

Is there any ways to manage differently the software that I've installed by a graphic interface where I can see what is on my computer, so I won't the same issue that I've explain here ???  Also the included mintinsall store, some software there it's not the latest versionof the program, anybody knows how to get the latest one or I should use another way like the apt command in the terminal ??? (it's that reason at first that I've installed the software many times with other ways)


thank you so much for your help ... I know there's lot of question that I have from installing software and I hope that I've exposed clearly my many problems (managing installed sofware on computer + how to always have the latest software (I know the apt update and apt upgrade command ... but not for the other ways.)

Manche

10
Software & Applications / Re: what to do when desktop crash ?
« on: July 14, 2020, 10:16:44 am »
thanks my friend !!!!!

11
Software & Applications / (SOLVED) what to do when desktop crash ?
« on: July 13, 2020, 04:40:58 pm »
Dear friends,


Sometimes for an unknown reason the desktop crash ... I mean all the icon disapear.


I would like to know if there's anyway to be able to restart the desktop without rebooting the computer ???


thanks for your help !!!!

12
GNU/Linux Gaming / Re: Retro gaming on Peppermint
« on: June 30, 2020, 07:14:32 am »
Just for information, I'm using an old xbox360 controller made by afterglow ... had some issue with mint for that controller (eachtime I boot my computer, I needed to execute the driver) ... no problem with lubuntu, and peppermint.  I know for su re peppermint is for me the best distro because of that ... I didn't want to spend to buy another controller and wanted a low hungry requirement OS.


It's perfect for all my needs and my retrogaming.  Works great with openra and supertuxkart !!!


So I'm really confident that almost any controller will works with our favorite OS

13
GNU/Linux Gaming / Re: Retro gaming on Peppermint
« on: June 30, 2020, 07:07:08 am »
Best retro gaming emulator : Retroarch .... every console is here !!!

14
GNU/Linux Gaming / Re: Full version DOS GAMES
« on: June 30, 2020, 06:57:53 am »
I think retroarch have a FOSS emulator heart ... I use it for NES and SNES game that I own and it's really works great ... I'm not sure if it's great for DOS game but guve it a try and tell us how is it !!!

Pages: [1]