Choose style:

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Linuxmade88

Pages: [1]
1
New Users / Re: Haydes Canyon NUC Issue
« on: March 27, 2020, 12:58:11 am »
I would but i have windows installed on it i had to remove peppermint for now. its a intel nuc haydes canyon 8i7hvk

2
New Users / Haydes Canyon NUC Issue
« on: March 25, 2020, 03:11:31 am »
Hi I have a haydes canyon intel nuc with windows on it and ive tried before installing peppermint on it but i was Getting that screan tearing issue in the browser that was just too annoying, ive tried do the provided fix on the forum for the intel based graphics card and it didnt work and i havent tried the amd one for the radeon vega gh m thats also installed. has anyone been able to figure out a solution to this specific hardware at all or is it something that because its a intel cpu with both a intel and amd graphics card installed its just not gonna work?

3
Hardware / Wifi is gone after bios update
« on: February 10, 2020, 11:32:39 am »
hi ive recently just barely got peppermint working on my computer andeverything was working alright with the exception of the 5ghz band wifi droppping or just not being available but i was dealing with it. I just had to run a bios update yesterday to be able to use a piece of hardware i have and now my wifi is completely missing and I have no idea how to go about this one. I would appreciate a little knowlege my way or a point in the right forum direction please I really dont wanna have to wipe this distro again.

Code: [Select]
System:    Host: NUC7 Kernel: 5.3.0-28-generic x86_64 bits: 64 gcc: 7.4.0
           Desktop: N/A Distro: Peppermint Ten
Machine:   Device: desktop System: Intel product: NUC7i7BNH v: J31153-311 serial: N/A
           Mobo: Intel model: NUC7i7BNB v: J31145-310 serial: N/A
           UEFI: Intel v: BNKBL357.86A.0081.2020.0114.1542 date: 01/14/2020
CPU:       Dual core Intel Core i7-7567U (-MT-MCP-)
           arch: Kaby Lake rev.9 cache: 4096 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 13999
           clock speeds: max: 4000 MHz 1: 1000 MHz 2: 1000 MHz 3: 1000 MHz
           4: 1000 MHz
Graphics:  Card: Intel Iris Plus Graphics 650 bus-ID: 00:02.0
           Display Server: x11 (X.Org 1.20.5 ) driver: intel
           Resolution: 1920x1080@60.00hz
           OpenGL: renderer: Mesa DRI Intel Iris Plus Graphics 650 (Kaby Lake GT3e)
           version: 4.5 Mesa 19.2.8 Direct Render: Yes
Audio:     Card Intel Sunrise Point-LP HD Audio
           driver: snd_hda_intel bus-ID: 00:1f.3
           Sound: Advanced Linux Sound Architecture v: k5.3.0-28-generic
Network:   Card-1: Intel Ethernet Connection (4) I219-V
           driver: e1000e v: 3.2.6-k bus-ID: 00:1f.6
           IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
           Card-2: Intel Wireless 8265 / 8275 bus-ID: 3a:00.0
           IF: N/A state: N/A mac: N/A
Drives:    HDD Total Size: 628.1GB (2.4% used)
           ID-1: /dev/nvme0n1 model: WDC_PC_SN520_SDAPNUW size: 128.0GB
           ID-2: /dev/sda model: Samsung_SSD_860 size: 500.1GB
Partition: ID-1: / size: 111G used: 6.0G (6%) fs: btrfs dev: /dev/nvme0n1p2
           ID-2: /home size: 280G used: 686M (1%) fs: btrfs dev: /dev/sda1
           ID-3: swap-1 size: 8.60GB used: 0.00GB (0%) fs: swap dev: /dev/nvme0n1p3
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 54.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A

4
New Users / Re: screen tearing
« on: February 09, 2020, 06:48:16 pm »
hey it worked! thanks for your time I really appreciate it. sorry if I was a bother .

5
New Users / Re: screen tearing
« on: February 08, 2020, 01:35:11 am »
i have attempted both solutions for the amd computer nothing worked so i tried it out on my intel nuc and had the smae issue and now im on my third computer same issue different processor another intel its a dell e7250, can you point me in the right direction of the tutorial so i can figure this out i really want this distro to work but having this screen tearing in the browser is too much to ignore . i scimmed through the tutorial section and couldnt find anything related to whats going on.

6
New Users / Re: screen tearing
« on: February 05, 2020, 09:11:16 pm »
ok sorry it took me a minute to respond, i dont think its the amd thats doing it ive had some time to install peppermint on a intel nuc to try it out and i was having the same exact issue involving just screen tearing only in the browser so now im wondering if youve heard of anyone else having an issue with peppermint 10 respin doing the same thing cause what i once thought was isolated to just my laptop being amd ryzen is now on a whole different set of hardware? im wondering if its possibly a bug?

7
New Users / Re: screen tearing
« on: January 22, 2020, 10:32:04 pm »
its all good no problem i appreciated the help trust me. im learning a ton with all these problems lol thanks again

8
New Users / Re: screen tearing
« on: January 22, 2020, 10:03:57 pm »
same thing it went straight to the command line and i had to remove it again.

9
New Users / Re: screen tearing
« on: January 22, 2020, 06:52:08 pm »
it said mesa-utils was already its newest and it also remove my desktop interface and i was stuck at only command line on reboot then i reverted and removed what was done with the command you gave me. i think it has something to do with kernel 5.3 on my system so far this is the only distro with a 5.3 kernel thats coming close to work but now this just started happening last night, every time i shut down i get
107.196201 failed to write reg 28b4 wait reg28c6 and same beggining numbers but the end ones are 1a6f4 wait reg 1a706 pretty much every distro i try has been giving me that output upon shutdown or reboot and it just started it last night. so on top of the screen tearing i have this should i open another issue in the forum about this one or do you have any info on to what it may be? pop os does the same fedora says the kernel crashes and freezes every other boot and zorin just went to kernel 5.3 and did the same message and booting up takes ages. i dont know what to do.

10
New Users / Re: screen tearing
« on: January 22, 2020, 12:38:42 pm »
Code: [Select]
System:    Host: Aspire Kernel: 5.3.0-26-generic x86_64 bits: 64 gcc: 7.4.0
           Desktop: N/A Distro: Peppermint Ten
Machine:   Device: laptop System: Acer product: Aspire A515-43 v: V1.05 serial: N/A
           Mobo: PK model: Grumpy_PK v: V1.05 serial: N/A
           UEFI: Insyde v: V1.05 date: 06/26/2019
Battery    BAT1: charge: 4.7 Wh 10.5% condition: 44.6/48.9 Wh (91%)
           model: LG 0x410x430x310x340x420x380x00D2 status: Discharging
CPU:       Dual core AMD Ryzen 3 3200U with Radeon Vega Mobile Gfx (-MT-MCP-)
           arch: Zen rev.1 cache: 1024 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 10380
           clock speeds: max: 2600 MHz 1: 1275 MHz 2: 2120 MHz 3: 1275 MHz
           4: 1234 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Picasso bus-ID: 05:00.0
           Display Server: x11 (X.Org 1.20.5 )
           drivers: ati,amdgpu (unloaded: modesetting,fbdev,vesa)
           Resolution: 1920x1080@59.98hz
           OpenGL: renderer: AMD RAVEN (DRM 3.33.0, 5.3.0-26-generic, LLVM 9.0.0)
           version: 4.5 Mesa 19.2.1 Direct Render: Yes
Audio:     Card-1 Advanced Micro Devices [AMD/ATI] Raven/Raven2/Fenghuang HDMI/DP Audio Controller
           driver: snd_hda_intel bus-ID: 05:00.1
           Card-2 Advanced Micro Devices [AMD] Family 17h (Models 10h-1fh) HD Audio Controller
           driver: snd_hda_intel bus-ID: 05:00.6
           Sound: Advanced Linux Sound Architecture v: k5.3.0-26-generic
Network:   Card-1: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
           driver: r8169 port: 2000 bus-ID: 03:00.0
           IF: enp3s0 state: down mac: <filter>
           Card-2: Intel Wi-Fi 6 AX200
           driver: iwlwifi v: iwlwifi-stack-public:master:8324:9176b151
           bus-ID: 04:00.0
           IF: wlp4s0 state: up mac: <filter>
Drives:    HDD Total Size: 248.1GB (10.6% used)
           ID-1: /dev/nvme0n1 model: WDC_PC_SN520_SDAPNUW size: 128.0GB
           ID-2: /dev/sda model: Samsung_SSD_840 size: 120.0GB
Partition: ID-1: / size: 217G used: 16G (8%) fs: ext4 dev: /dev/dm-0
           ID-2: swap-1 size: 10.46GB used: 0.00GB (0%) fs: swap dev: /dev/dm-1
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: No active sensors found. Have you configured your sensors yet? mobo: N/A
Info:      Processes: 228 Uptime: 1 min Memory: 683.4/9965.8MB
           Init: systemd runlevel: 5 Gcc sys: 7.4.0
           Client: Shell (bash 4.4.201) inxi: 2.3.56
i havent taken a look at that link you sent me zeb but as soon as im back from class i will, btw i love the show keep up the good work i listen to it everyday at work.

@The Omen i havent had a chance to read the output myself im kinda in a hurry but as soon as im back ill take a look at it also thank you for whatever help is provided i appreciate it.

11
New Users / screen tearing (Solved)
« on: January 21, 2020, 07:59:33 pm »
hi ive just installed peppermint and everything is nearly perfect except when i open firefox and scroll the page down or up i get this tearing going on through out the page in a singe or sometimes double line its not a pixelated tear its looks as if the screen is lagging in that part of the line. the line isnt isolated it travels up and down the page depending on scroll and so far this is the only distro that this specific issue happens. is there any settings i can tweak to possibly remove this issue? historically ive had issues with xfce running on my acer aspire to where i had to go into gconf or dconf and change a setting to 'xpresent' but it doesnt seem to make a difference here. any ideas? thank you

Pages: [1]