Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Ranmit11

Pages: [1]
1
General Discussion / Re: Should I update the bios ?
« on: November 09, 2019, 07:29:05 pm »
My problem are same with this guy
Spoiler (click here to view / hide)
[close]
, but he proceed it anyway
and surprisingly it works  :o

so I proceed it anyway too via bootable usb
from bios ver 1.6 updated to ver 2.6
bios update successfully

Phew....... that was risky  ;D
note : every laptop are different so please proceed with your own risk

Thank you guys !!!

2
I have Toshiba L745 with part no : PSK12L-02U00G
This laptop sometimes suddenly shutdown and showed battery lamp indicator & power indicator blinking. (If this happen looks like hardisk is broken, need bios update, ram is broken, laptop automatically shutdown in a way to protect from data loss due electric shock)
In few years ago I fixed that by buying new HDD.

And now that happened again. I'm buying a new SSD adata su650 120gb, but it wont fixed that, my laptop still randomly shutdown (when tried to install windows 10 randomly shutdown) :'(
I tried any possibilities but nothing was fixed and I leave my laptop without electricity for one day.

Next day no idea my laptop is no more shutdown randomly anymore  ??? For now I can run windows 10.

My bios ver 1.6
https://support.dynabook.com/support/viewContentDetail?contentId=3442814
Thats link for bios ver 2.6 support laptop toshiba L745 with first part no : PSK12*

I run that and see this
Quote
This BIOS is aplicable to the following models :

-satellite L410/L745 models having part numbers beginning with "PSK0YU"
-satellite L745 models having part numbers beginning with "PSK0YM"
-satellite L745 models having part numbers beginning with "PSK0YP"
-satellite L745 models having part numbers beginning with "PSK12M"
-satellite L745 models having part numbers beginning with "PSK12P"
-satellite L745 models having part numbers beginning with "PSK12U"
-satellite pro L740/L770 models having part numbers beginning with "PSK0ZU"

for purposes of this document, the term satellite L745 is used to generically refer to all of the models listed above

What should I do update it or not ? I can't find anymore bios update in google with same part number (PSK12L)  :-\

3
Installation / Re: Dual boot windows 7 alongside peppermint
« on: October 24, 2019, 06:32:12 am »
Thank very much !!!  :D :D :D :D :D :D

4
Installation / Re: Dual boot windows 7 alongside peppermint
« on: October 23, 2019, 04:34:28 am »
I am newbie just following installation guide in web, (sorry I can't find that web) :(
but i remember to choose "something else"
make some partitions with mount point  : /boot, /var, /, /usr, /home (i don't remember exactly)

I'm sure sda4 is my personal partition storage

I don't know how to post a picture here (want to post a files screenshots), hopeful this ls command output can help :-\

inside sda1 =
Code: [Select]
ubuntu@ubuntu /media/ubuntu/b0dea33c-89c7-40ee-9d2f-388042927e4f $ ls
System.map-4.18.0-18-generic  grub                          memtest86+.elf
System.map-5.0.0-31-generic   initrd.img-4.18.0-18-generic  memtest86+_multiboot.bin
config-4.18.0-18-generic      initrd.img-5.0.0-31-generic   vmlinuz-4.18.0-18-generic
config-5.0.0-31-generic       lost+found                    vmlinuz-5.0.0-31-generic
efi                           memtest86+.bin

inside sda5(I suspect this is /home it because that my username) =
Code: [Select]
ubuntu@ubuntu /media/ubuntu/f86112db-a7d6-44a2-b462-44073fcfe5f0 $ ls
bajra  lost+found

inside sda6 =
Code: [Select]
ubuntu@ubuntu /media/ubuntu/7939a43a-6255-41ab-8a5e-0d81040da72a $ ls
backups  crash  local  log         mail     opt  snap   tmp
cache    lib    lock   lost+found  metrics  run  spool

inside sda7 =
Code: [Select]
ubuntu@ubuntu /media/ubuntu/962922a7-f2dd-4158-8760-249f3fd48cb4 $ ls
bin    dev   initrd.img      lib64       mnt   root  snap  tmp  vmlinuz
boot   etc   initrd.img.old  lost+found  opt   run   srv   usr  vmlinuz.old
cdrom  home  lib             media       proc  sbin  sys   var

5
Installation / Re: Dual boot windows 7 alongside peppermint
« on: October 22, 2019, 09:26:52 am »
Code: [Select]
ubuntu@ubuntu ~ $ sudo fdisk -l
Disk /dev/loop0: 1.4 GiB, 1472348160 bytes, 2875680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes


Disk /dev/sda: 111.8 GiB, 120034123776 bytes, 234441648 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x256488f3

Device     Boot     Start       End  Sectors  Size Id Type
/dev/sda1            2048   2000895  1998848  976M 83 Linux
/dev/sda2         2002942  80001023 77998082 37.2G  5 Extended
/dev/sda3  *     80001024 141441023 61440000 29.3G  7 HPFS/NTFS/exFAT
/dev/sda4       141441024 234440703 92999680 44.4G 83 Linux
/dev/sda5         2002944  42000383 39997440 19.1G 83 Linux
/dev/sda6        42002432  56000511 13998080  6.7G 83 Linux
/dev/sda7        56002560  76001279 19998720  9.5G 83 Linux
/dev/sda8        76003328  80001023  3997696  1.9G 82 Linux swap / Solaris

Partition table entries are not in disk order.


Disk /dev/sdb: 7.2 GiB, 7759462400 bytes, 15155200 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00026eae

Device     Boot Start      End  Sectors  Size Id Type
/dev/sdb1  *     2048 15155199 15153152  7.2G  7 HPFS/NTFS/exFAT


Disk /dev/zram0: 430.1 MiB, 451039232 bytes, 110117 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/zram1: 430.1 MiB, 451039232 bytes, 110117 sectors
Units: sectors of 1 * 4096 = 4096 bytes
Sector size (logical/physical): 4096 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Code: [Select]
ubuntu@ubuntu ~ $ blkid
/dev/sda1: UUID="b0dea33c-89c7-40ee-9d2f-388042927e4f" TYPE="ext4" PARTUUID="256488f3-01"
/dev/sda3: UUID="90FAFBBAFAFB9AA4" TYPE="ntfs" PARTUUID="256488f3-03"
/dev/sda4: LABEL="Data" UUID="047d4d75-af12-4e67-aeda-30f0e9afb80a" TYPE="ext4" PARTUUID="256488f3-04"
/dev/sda5: UUID="f86112db-a7d6-44a2-b462-44073fcfe5f0" TYPE="ext4" PARTUUID="256488f3-05"
/dev/sda6: UUID="7939a43a-6255-41ab-8a5e-0d81040da72a" TYPE="ext4" PARTUUID="256488f3-06"
/dev/sda7: UUID="962922a7-f2dd-4158-8760-249f3fd48cb4" TYPE="ext4" PARTUUID="256488f3-07"
/dev/sdb1: LABEL="MULTIBOOT" UUID="C64A8F9E4A8F89BF" TYPE="ntfs" PARTUUID="00026eae-01"

6
Installation / Dual boot windows 7 alongside peppermint (SOLVED)
« on: October 21, 2019, 06:36:07 am »
For the first time i think it will be okay if i install peppermint os only. So, when i first time installed pep 10 I didn't choose install alongside windows i formated all partition, and start from zero.

But for some reasons i need to back to windows 7 by dual booting with pep 10.

Spoiler (click here to view / hide)
[close]

2. I decided to burn win 7 in different laptop used rufus

3. I'm already prepared a 30gb ntfs partition for win 7 in pep 10 using gparted

4. I'm normaly installed win 7 inside ntfs partition

5. After rebooting there was a message about source
windows installation is missing
(i don't remember
exactly)

6. Restarted the laptop again there was message try to
reinstall windows

7. I'm formated the win 7 partition, and restart

8. Displaying error message bootmgr is missing...

9. Then installing win 7 with normal procces again inside
ntfs partition

10. The installation is faster than before. And was
succesfully install win 7. But theres no windows boot
manager
. So i cannot enter peppermint for now

11. In win 7 i only see /c: (ntfs) partition in windows explorer.
I can't find another partition that stored my data while in
pep 10 (ext4)

My current laptop is legacy bios
How to fix dual boot win 7 alongside pep 10 guys ?  :-\

7
Installation / Trying to generate proprietary driver packages
« on: October 19, 2019, 07:34:55 am »
I'm noob currently used Acer Aspire One 722 , after read the installation guide there's has a way to install proprietary driver on unsupported by generating packages. (I know I can't install proprietary driver by normal installation because peppermint 10 no more longer support older devices) but i keep trying don't easily give up !  8)

Code: [Select]
bajra@AO722 ~/Downloads/proprietary driver $ sh ./AMD-Catalyst-15.9-Linux-installer-15.201.1151-x86.x86_64.run
Created directory fglrx-install.fmzIYT
Verifying archive integrity... All good.
Uncompressing AMD Catalyst(TM) Proprietary Driver-15.201.1151...
=====================================================================
 AMD Catalyst(TM) Proprietary Driver Installer/Packager
=====================================================================

error: Detected X Server version 'XServer _64a' is not supported. Supported versions are X.Org 6.9 or later, up to XServer 1.10 (default:v2:x86_64:lib:XServer _64a:none:5.0.0-31-generic:)
Installation will not proceed.

Removing temporary directory: fglrx-install.fmzIYT

but, is this possible to fix xorg so I can proceed ?  :-\

8
New Users / Re: Driver for Acer Aspire One 722
« on: October 12, 2019, 11:47:44 am »
Ah I see... as I expected, old hardware recently not supported anymore. Whatever, I just use this laptop for browsing only, I don't expect too much for gaming Geometry Dash (I can play using my smartphone or my another medium spec laptop) If I want, then I must to install windows 7. But I want to explore something new, so I'm running without proprietary driver its okay.  :D

9
New Users / Driver for Acer Aspire One 722
« on: October 11, 2019, 11:30:43 am »
Hi! ,I'm a new linux user here. Before this I'm used Elementary os in my another laptop with medium spec and that's in very short time, it because my brother annoyed by legacy grub dual boot Elementary Os and Widows 10 (I' cant install UEFI)
"hey don't make something weird with this laptop!" he said  :-\
Well I just tried to revive my old potato laptop Acer Aspire One 722 using lightweight linux (I know peppermint from techradar) :)



This is my experience :
Spoiler (click here to view / hide)
[close]



This laptop can play Geometry Dash smoothly in windows 7, But using wine & open source driver in peppermint its become laggy (I don't know if using proprietary driver) this open source driver also cannot play youtube videos smoothly
If you guys know some recommendations/performance improvements, tell me guys please :D
(I don't know which is better open source or proprietary)



conclusion :
1. How to install graphics driver ?
2. Which is better proprietary or open source ?



this is my newest system information
Code: [Select]
System:    Host: AO722 Kernel: 4.18.0-18-generic x86_64 bits: 64 gcc: 7.3.0
           Desktop: N/A Distro: Peppermint Ten
Machine:   Device: laptop System: Acer product: AO722 v: V1.07 serial: N/A
           Mobo: Acer model: JE10-BZ serial: N/A
           BIOS: Acer v: V1.07 date: 09/19/2011
Battery    BAT1: charge: 14.7 Wh 82.0% condition: 17.9/48.8 Wh (37%)
           model: Sanyo AL10B31 status: Discharging
CPU:       Dual core AMD C-60 APU with Radeon HD Graphics (-MCP-)
           arch: Bobcat rev.0 cache: 512 KB
           flags: (lm nx sse sse2 sse3 sse4a ssse3 svm) bmips: 3990
           clock speeds: max: 1000 MHz 1: 1001 MHz 2: 1005 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Wrestler [Radeon HD 6290]
           bus-ID: 00:01.0
           Display Server: x11 (X.Org 1.20.1 )
           drivers: ati,radeon (unloaded: modesetting,fbdev,vesa)
           Resolution: 1366x768@59.97hz
           OpenGL: renderer: AMD PALM (DRM 2.50.0 / 4.18.0-18-generic, LLVM 8.0.0)
           version: 3.3 Mesa 19.0.8 Direct Render: Yes
Audio:     Card-1 Advanced Micro Devices [AMD/ATI] Wrestler HDMI Audio
           driver: snd_hda_intel bus-ID: 00:01.1
           Card-2 Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA)
           driver: snd_hda_intel bus-ID: 00:14.2
           Sound: Advanced Linux Sound Architecture v: k4.18.0-18-generic
Network:   Card-1: Qualcomm Atheros AR8152 v2.0 Fast Ethernet
           driver: atl1c v: 1.0.1.1-NAPI port: 2000 bus-ID: 06:00.0
           IF: enp6s0 state: down mac: <filter>
           Card-2: Qualcomm Atheros AR9485 Wireless Network Adapter
           driver: ath9k bus-ID: 07:00.0
           IF: wlp7s0 state: up mac: <filter>
Drives:    HDD Total Size: 120.0GB (17.6% used)
           ID-1: /dev/sda model: ADATA_SU650 size: 120.0GB
Partition: ID-1: / size: 9.4G used: 6.9G (78%) fs: ext4 dev: /dev/sda7
           ID-2: /var size: 6.6G used: 1.3G (21%) fs: ext4 dev: /dev/sda6
           ID-3: /boot size: 945M used: 66M (8%) fs: ext4 dev: /dev/sda1
           ID-4: /home size: 19G used: 1.8G (10%) fs: ext4 dev: /dev/sda5
           ID-5: swap-1 size: 2.05GB used: 0.06GB (3%) fs: swap dev: /dev/sda8
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 62.9C mobo: N/A gpu: 62.0
           Fan Speeds (in rpm): cpu: N/A
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://id.archive.ubuntu.com/ubuntu/ bionic main restricted
           deb http://id.archive.ubuntu.com/ubuntu/ bionic-updates main restricted
           deb http://id.archive.ubuntu.com/ubuntu/ bionic universe
           deb http://id.archive.ubuntu.com/ubuntu/ bionic-updates universe
           deb http://id.archive.ubuntu.com/ubuntu/ bionic multiverse
           deb http://id.archive.ubuntu.com/ubuntu/ bionic-updates multiverse
           deb http://id.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse
           deb http://archive.canonical.com/ubuntu bionic partner
           deb http://security.ubuntu.com/ubuntu bionic-security main restricted
           deb http://security.ubuntu.com/ubuntu bionic-security universe
           deb http://security.ubuntu.com/ubuntu bionic-security multiverse
           deb https://dl.winehq.org/wine-builds/ubuntu/ bionic main
           Active apt sources in file: /etc/apt/sources.list.d/peppermint.list
           deb http://ppa.launchpad.net/peppermintos/p10-release/ubuntu bionic main
Info:      Processes: 172 Uptime: 1:38 Memory: 1058.4/1720.6MB
           Init: systemd runlevel: 5 Gcc sys: 7.4.0
           Client: Shell (bash 4.4.191) inxi: 2.3.56

Pages: [1]