Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - xrinh

Pages: [1]
1
Installation / Re: Peppermint 10 Gparted Issue
« on: August 10, 2019, 11:08:17 pm »
Hi xrinh,

So you can boot into Peppermint (on the USB stick) with the  DV6 Pavilion 1359wm ?? If you can then open a terminal and enter this command:
Code: [Select]
inxi -Fzthen copy the output and post it back here in your reply. This command prints out some information about your computer that could be helpful in trying to solve your issue. According to this web page some of these computers seem to have been delivered (at least at the time of purchase) with M$ Windows 7 Home Premium, 64-bit.

Also, user guides are available on this HP website. It could be that your computer's BIOS has some settings in the security section that need to be accessed and changed (by you) before the GParted program is permitted to access and modify the HDD (for example: if the computer comes with Secure Boot, this might need to be disabled in the BIOS before GParted can "see" the HDD).  ;)


So do some more homework, using the user guides for the machine, and let us know what you have done, what the results are and if you still need assistance.

Regards,

-- Slim

Heya, Thanks for replying! I did further research the BIOS from the manufacturer, and I've come to the conclusion that the hard drive has essentially failed?
Also, here is the terminal you asked for:
inxi -Fz
System:    Host: peppermint Kernel: 4.18.0-18-generic x86_64 bits: 64 Desktop: N/A
           Distro: Peppermint Ten
Machine:   Device: laptop System: Hewlett-Packard product: HP Pavilion dv6 Notebook PC v: Rev 1 serial: N/A
           Mobo: Hewlett-Packard model: 3627 v: 18.50 serial: N/A
           BIOS: Hewlett-Packard v: F.41 date: 11/12/2009
Battery    BAT0: charge: 0.4 Wh 7.1% condition: 5.0/48.8 Wh (10%)
CPU:       Dual core Intel Core2 Duo T6600 (-MCP-) cache: 2048 KB
           clock speeds: max: 2200 MHz 1: 1198 MHz 2: 1197 MHz
Graphics:  Card: Intel Mobile 4 Series Integrated Graphics Controller
           Display Server: x11 (X.Org 1.20.1 )
           drivers: modesetting (unloaded: fbdev,vesa)
           Resolution: 1366x768@59.42hz
           OpenGL: renderer: Mesa DRI Mobile Intel GM45 Express
           version: 2.1 Mesa 18.2.8
Audio:     Card Intel 82801I (ICH9 Family) HD Audio Controller
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.18.0-18-generic
Network:   Card-1: Intel Centrino Wireless-N 1000 [Condor Peak] driver: iwlwifi
           IF: wlp2s0 state: up mac: <filter>
           Card-2: Realtek RTL810xE PCIE Fast Ethernet controller driver: r8169
           IF: enp3s0 state: down mac: <filter>
Drives:    HDD Total Size: 8.2GB (23.6% used)
           ID-1: USB /dev/sda model: USB_2.0_FD size: 8.2GB
Partition: ID-1: / size: 1.9G used: 32M (2%) fs: overlay dev: N/A
           ID-2: swap-1 size: 1.01GB used: 0.00GB (0%) fs: swap dev: /dev/zram0
           ID-3: swap-2 size: 1.01GB used: 0.00GB (0%) fs: swap dev: /dev/zram1
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 61.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 172 Uptime: 2 min Memory: 366.4/3848.4MB
           Client: Shell (bash) inxi: 2.3.56
I hope this helps!

2
Installation / Peppermint 10 Gparted Issue
« on: August 07, 2019, 05:55:36 pm »
Hi,
I am super new to peppermint. I am currently using a live OS of Peppermint 10 on a DV6 Pavilion 1359wm Entertainment Notebook PC.  I tried to install peppermint on this laptop due to the hard drive seemingly has no boot loader, or something to that effect as well as no OS installed.  Upon using the installer, it only shows the USB stick for installing it, yet, nothing else. I have tried EVERYTHING.  Now to update you on what the issue is, bear with me, I posted it in Reddit's Lubuntu (Since I was trying that out first...) as well as Linux4noobs subreddit.  I'm kind of giving up at this point, but I am DETERMINED to make this work! One way or the other. I am trying to make this my back up Laptop if something happens to my current PC I am using with Ubuntu 18.04 Bionic Beaver. Whilst trying Lubuntu, tons of kind users tried coaching me on what to do. But all of it failed, Or I am just completely useless. I even installed Windows 10 on a flash drive, just to see if it'd work, but no luck. Came up with a blue screen of a boot error.  So I scrapped Lubuntu, got Peppermint and tried it, thus far, I LOVE it. However...still no luck on how to install it. :(
1) https://www.reddit.com/r/linux4noobs/comments/cm3w7f/lubuntu_1904_issue/
2) https://www.reddit.com/r/Lubuntu/comments/cn08h4/lubuntu_partition_issue_cross_post_from/

Pages: [1]