Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - YeeP

Pages: [1]
1
New Users / Re: How to turn off transparency on "inactive" monitor
« on: September 20, 2015, 06:51:09 am »
Got it, thanks for the tip. It is a cool effect for sure but when I need to use both monitors quite a bit I find it difficult to read the inactive monitor.

2
New Users / How to turn off transparency on "inactive" monitor (SOLVED)
« on: September 19, 2015, 08:30:35 pm »
Hello. When I first started using peppermint I thought it was actually kind of cool, but being that I used two monitors all the time for web development and pretty much everything else I have run into a problem with this. I will have multiple programs stacked on top of each other on the monitor I am not currently active on, while looking at the other. I turn my head slightly to read some of the code I am looking to modify on the inactive monitor, and it is nearly impossible to read because of what this is doing. How can I set this up so everything stays fully opaque even when I am on the other monitor?

Thank you.

3
New Users / Re: dual monitor support
« on: September 09, 2015, 06:07:29 pm »
Cool, good ideas and I will play around with them to see what I can come up with.

Thanks!

4
Mark it solved once you're 100% happy it works ;)

but yeah, to mark it solved just append (SOLVED) to the subject line of the FIRST posting in this topic.

and you're most welcome :)

Did it, and thanks for the help. Now onto Plex Media Server... :)

5
See my last post.

the missing dependencies need to have "lts-utopic" appended to their names because we're running the lts-utopic LTS enablement stack .. so run the command in my last post, then try again.

Done, and it looks like that took care of it. Here is the response I got from running it before hitting yes to continue in case you are curious:
Code: [Select]
yeep@Peppermint-YeeP ~/.local/share/Steam/ubuntu12_32 $ sudo apt-get install libgl1-mesa-dri-lts-utopic:i386 libgl1-mesa-glx-lts-utopic:i386 libglapi-mesa-lts-utopic:i386
[sudo] password for yeep:
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following extra packages will be installed:
  gcc-4.8-base:i386 gcc-4.9-base:i386 libc6:i386 libcgmanager0:i386
  libdbus-1-3:i386 libdrm-intel1:i386 libdrm-nouveau2:i386 libdrm-radeon1:i386
  libdrm2:i386 libedit2:i386 libelf1:i386 libexpat1:i386 libffi6:i386
  libgcc1:i386 libllvm3.5:i386 libnih-dbus1:i386 libnih1:i386
  libpciaccess0:i386 libstdc++6:i386 libtinfo5:i386 libtxc-dxtn-s2tc0:i386
  libudev1:i386 libx11-6:i386 libx11-xcb1:i386 libxau6:i386 libxcb-dri2-0:i386
  libxcb-dri3-0:i386 libxcb-glx0:i386 libxcb-present0:i386 libxcb-sync1:i386
  libxcb1:i386 libxdamage1:i386 libxdmcp6:i386 libxext6:i386 libxfixes3:i386
  libxshmfence1:i386 libxxf86vm1:i386 zlib1g:i386
Suggested packages:
  glibc-doc:i386 locales:i386
The following NEW packages will be installed:
  gcc-4.8-base:i386 gcc-4.9-base:i386 libc6:i386 libcgmanager0:i386
  libdbus-1-3:i386 libdrm-intel1:i386 libdrm-nouveau2:i386 libdrm-radeon1:i386
  libdrm2:i386 libedit2:i386 libelf1:i386 libexpat1:i386 libffi6:i386
  libgcc1:i386 libgl1-mesa-dri-lts-utopic:i386 libgl1-mesa-glx-lts-utopic:i386
  libglapi-mesa-lts-utopic:i386 libllvm3.5:i386 libnih-dbus1:i386 libnih1:i386
  libpciaccess0:i386 libstdc++6:i386 libtinfo5:i386 libtxc-dxtn-s2tc0:i386
  libudev1:i386 libx11-6:i386 libx11-xcb1:i386 libxau6:i386 libxcb-dri2-0:i386
  libxcb-dri3-0:i386 libxcb-glx0:i386 libxcb-present0:i386 libxcb-sync1:i386
  libxcb1:i386 libxdamage1:i386 libxdmcp6:i386 libxext6:i386 libxfixes3:i386
  libxshmfence1:i386 libxxf86vm1:i386 zlib1g:i386
0 upgraded, 41 newly installed, 0 to remove and 0 not upgraded.
Need to get 17.0 MB of archives.
After this operation, 62.5 MB of additional disk space will be used.
Do you want to continue? [Y/n]


I now have the window on screen where I can log into my existing account. I will do this and begin a download just as a test but I think this is solved. Should I edit the OP and change the subject to inclide "SOLVED"?

Thanks for the help!

6
This seems to be a common request by others I have seen having this problem on the steam for linux forums.

Looks like I am missing quite a bit:
Code: [Select]
yeep@Peppermint-YeeP ~/.local/share/Steam/ubuntu12_32 $ LD_LIBRARY_PATH=. ldd steamui.so
linux-gate.so.1 =>  (0xf77d7000)
libtier0_s.so => ./libtier0_s.so (0xf63cc000)
libvstdlib_s.so => ./libvstdlib_s.so (0xf6380000)
libv8.so => ./libv8.so (0xf5a95000)
libvideo.so => ./libvideo.so (0xf569d000)
libSDL2-2.0.so.0 => ./libSDL2-2.0.so.0 (0xf5598000)
libXtst.so.6 => not found
libXfixes.so.3 => not found
libXrandr.so.2 => not found
libXext.so.6 => not found
libX11.so.6 => not found
libGL.so.1 => not found
libgobject-2.0.so.0 => not found
libglib-2.0.so.0 => not found
libgtk-x11-2.0.so.0 => not found
librt.so.1 => /lib32/librt.so.1 (0xf5578000)
libpulse.so.0 => not found
libgdk_pixbuf-2.0.so.0 => not found
libm.so.6 => /lib32/libm.so.6 (0xf5531000)
libdl.so.2 => /lib32/libdl.so.2 (0xf552c000)
libstdc++.so.6 => not found
libpthread.so.0 => /lib32/libpthread.so.0 (0xf550f000)
/lib/ld-linux.so.2 (0xf77da000)
libc.so.6 => /lib32/libc.so.6 (0xf5364000)
libstdc++.so.6 => not found
libstdc++.so.6 => not found
libicui18n.so => ./libicui18n.so (0xf5148000)
libicuuc.so => ./libicuuc.so (0xf45ce000)
libstdc++.so.6 => not found
libgcc_s.so.1 => not found
libavcodec.so.56 => ./libavcodec.so.56 (0xf4471000)
libavformat.so.56 => ./libavformat.so.56 (0xf443b000)
libavresample.so.2 => ./libavresample.so.2 (0xf441a000)
libavutil.so.54 => ./libavutil.so.54 (0xf43ed000)
libswscale.so.3 => ./libswscale.so.3 (0xf4398000)
libstdc++.so.6 => not found
libstdc++.so.6 => not found
libgcc_s.so.1 => not found
libstdc++.so.6 => not found
libgcc_s.so.1 => not found
libbz2.so.1.0 => not found
libz.so.1 => not found

7
Code: [Select]
apt update && apt upgradeHit enter and enter your user password when asked.  Hit enter again and follow the on screen instructions. 
Result:
Code: [Select]
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
After that has completed, continue with:
Code: [Select]
apt dist-upgradeHit enter and enter your user password if asked.  Hit enter again and follow the on screen instructions.
Result:
Code: [Select]
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

After the upgrade has completed, reboot your machine because there may have been kernel upgrades. 

How are you trying to install Steam?  Is it from the official repository or are you trying to down load it from their website?
I downloaded from the steam website. Now I am trying from the Software Manager, looks like it is the same version as what is on the site:


Now I am on the same beginning attempt by steam to install the missing packages:


And that one is also a fail.



From what I can tell on others reporting to steam on this, the setup works if you have an Nvidia chip, not sure if that is what you are running PCNetSpec.

8
I have Steam installed on P6 64-bit on three computers with no issues.  All of the i386 dependencies should have been automatically installed when you installed Steam.  How did you install it?  Did you use the Software Manager, Synpatic Package Manager or the Terminal?

I installed from the steam website deb package downloaded here: http://store.steampowered.com/about/

Edit: looks like that is version 1.0.0.50



I will remove the package and attempt from the software manager.

9
New Users / Re: dual monitor support
« on: September 09, 2015, 11:21:01 am »
That profile can then be easily loaded from ARandR .. or even set to autostart with the desktop.

PCNetSpec: I have used this method and have two scripts now, one for when I have both monitors in use, and one for when the laptop is not plugged into the other monitor on my desk.
Is there a method that can be used to detect if the second monitor is plugged in via scripting? I would like to run an autostart that runs the proper script based on what it finds.

Thoughts?

10
Hello! I am trying to get the latest install of Steam running on Peppermint Six (my machine is 64 bit)and am getting errors related to these packages:
libgl1-mesa-dri:i386
libgl1-mesa-glx:386
libc6:i386

Here is a screen shot from the Steam install:


This looks like it was a common problem back in ubuntu 12.10( https://github.com/ValveSoftware/steam-for-linux/issues/321 ), still trying to figure out how I can get around it.
Any suggestions would be much appreciated.

Thank you

Pages: [1]