Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - alynur

Pages: [1] 2 3 ... 9
1
Software & Applications / Ice files won't launch
« on: August 24, 2020, 07:45:04 am »
After doing a fresh install of P 10 on my laptop, which fixed my mic and camera problems, the Ice SSB's I've created won't launch. How can I fix this?


Code: [Select]
System:    Host: albert-laptop Kernel: 5.4.0-42-generic x86_64 bits: 64
           Desktop: N/A Distro: Peppermint Ten
Machine:   Device: laptop System: SAMSUNG product: 300E4A/300E5A/300E7A/3430EA/3530EA v: 0.1 serial: N/A
           Mobo: SAMSUNG model: 300E4A/300E5A/300E7A/3430EA/3530EA v: FAB1 serial: N/A
           UEFI: Phoenix v: 03QA date: 12/14/2011
Battery    BAT1: charge: 32.9 Wh 80.0% condition: 41.1/48.8 Wh (84%)
CPU:       Dual core Intel Core i5-2450M (-MT-MCP-) cache: 3072 KB
           clock speeds: max: 3100 MHz 1: 1034 MHz 2: 1087 MHz 3: 1180 MHz
           4: 992 MHz
Graphics:  Card: Intel 2nd Generation Core Integrated Graphics Controller
           Display Server: x11 (X.Org 1.20.8 ) driver: intel
           Resolution: 1366x768@60.07hz
           OpenGL: renderer: Mesa DRI Intel HD Graphics 3000 (SNB GT2)
           version: 3.3 Mesa 20.0.8
Audio:     Card Intel 6 Series/C200 Series Family High Def. Audio Controller
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k5.4.0-42-generic
Network:   Card-1: Intel Centrino Wireless-N 130 driver: iwlwifi
           IF: wlp1s0 state: up mac: <filter>
           Card-2: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
           driver: r8169
           IF: enp2s0 state: down mac: <filter>
Drives:    HDD Total Size: 240.1GB (39.4% used)
           ID-1: /dev/sda model: SATA_SSD size: 240.1GB
Partition: ID-1: / size: 48G used: 9.0G (20%) fs: ext4 dev: /dev/sda2
           ID-2: swap-1 size: 8.38GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 58.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 224 Uptime: 37 min Memory: 1305.5/7874.6MB
           Client: Shell (bash) inxi: 2.3.56

2
Software & Applications / Gimp will not open in P 9
« on: May 15, 2020, 09:55:40 am »
Hello Peppermint people. I just noticed this today, I am unable to open Gimp, the PCNetSpec version. If I try to open a document with Gimp or just try to open Gimp from the menu, I get a black rectangular screen flash just for a second and then it's gone. This happens with the 5.7 and the 5.3 kernels. Is anyone else having problems with PCNetSpec's version of Gimp? Not sure if I'm going to delete it and install from synaptic or what. Any ideas?

3
Hardware / Problems with mic and camera in FB on P 9
« on: April 24, 2020, 09:59:57 am »
Hello Peppermint people. This is a relatively new problem, just haven't addressed it until now. I very seldom use my laptop for video chatting but when I try to I prefer that it works. I was able to use the camera and mic in P 7 but since I upgraded the laptop to P 9, they don't work in FB. I can record my voice in Audacity and my camera works in Cheese. I've tried using these in other 18.04 distros on the laptop and they don't work there either. I booted a live version of P 7 and they do work in it. So I'm assuming it's a kernel problem. I did boot into the default kernel, but that didn't work either. How far back in kernels can I try without running into problems in P 9? Anything else I can try?

Code: [Select]
albert@albert-laptop_SamsungNP300E4A ~ $ inxi -FZ
System:    Host: albert-laptop_SamsungNP300E4A Kernel: 5.3.0-46-generic x86_64
           bits: 64
           Desktop: N/A Distro: Peppermint Nine
Machine:   Device: laptop System: SAMSUNG product: 300E4A/300E5A/300E7A/3430EA/3530EA v: 0.1 serial: N/A
           Mobo: SAMSUNG model: 300E4A/300E5A/300E7A/3430EA/3530EA v: FAB1 serial: N/A
           UEFI: Phoenix v: 03QA date: 12/14/2011
Battery    BAT1: charge: 32.9 Wh 80.0% condition: 41.1/48.8 Wh (84%)
CPU:       Dual core Intel Core i5-2450M (-MT-MCP-) cache: 3072 KB
           clock speeds: max: 3100 MHz 1: 1266 MHz 2: 1064 MHz 3: 937 MHz
           4: 1031 MHz
Graphics:  Card: Intel 2nd Generation Core Integrated Graphics Controller
           Display Server: x11 (X.Org 1.19.6 ) driver: intel
           Resolution: 1366x768@60.07hz
           OpenGL: renderer: Mesa DRI Intel Sandybridge Mobile
           version: 3.3 Mesa 19.2.8
Audio:     Card Intel 6 Series/C200 Series Family High Def. Audio Controller
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k5.3.0-46-generic
Network:   Card-1: Intel Centrino Wireless-N 130 driver: iwlwifi
           IF: wlp1s0 state: up mac: b8:03:05:06:3c:b8
           Card-2: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
           driver: r8169
           IF: enp2s0 state: down mac: e8:03:9a:22:4b:1c
Drives:    HDD Total Size: 240.1GB (50.7% used)
           ID-1: /dev/sda model: SATA_SSD size: 240.1GB
Partition: ID-1: / size: 48G used: 38G (84%) fs: ext4 dev: /dev/sda2
           ID-2: swap-1 size: 8.38GB used: 0.05GB (1%) fs: swap dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 56.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 218 Uptime: 1:44 Memory: 1568.8/7874.6MB
           Client: Shell (bash) inxi: 2.3.56


Here is the P 7 data


 
Code: [Select]
peppermint@peppermint ~ $ inxi -Fz
System:    Host: peppermint Kernel: 4.4.0-51-generic x86_64 (64 bit)
          Desktop: N/A Distro: Peppermint Seven
Machine:   System: SAMSUNG product: 300E4A/300E5A/300E7A/3430EA/3530EA v: 0.1
           Mobo: SAMSUNG model: 300E4A/300E5A/300E7A/3430EA/3530EA v: FAB1
           Bios: Phoenix v: 03QA date: 12/14/2011
CPU:       Dual core Intel Core i5-2450M (-HT-MCP-) cache: 3072 KB
           clock speeds: max: 3100 MHz 1: 805 MHz 2: 799 MHz 3: 799 MHz
           4: 799 MHz
Graphics:  Card: Intel 2nd Generation Core Processor Family Integrated Graphics Controller
            Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1366x768@60.07hz
           GLX Renderer: Mesa DRI Intel Sandybridge Mobile
           GLX Version: 3.0 Mesa 11.2.0
Audio:     Card Intel 6 Series/C200 Series Family High Definition Audio Controller
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.4.0-51-generic
Network:   Card-1: Intel Centrino Wireless-N 130 driver: iwlwifi
          IF: wlp1s0 state: up mac: <filter>
           Card-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169
           IF: enp2s0 state: down mac: <filter>
Drives:    HDD Total Size: 271.3GB (4.4% used)
           ID-1: /dev/sda model: SATA_SSD size: 240.1GB
           ID-2: USB /dev/sdb model: Cruzer_Blade size: 31.3GB
Partition: ID-1: / size: 3.9G used: 38M (1%) fs: overlay dev: N/A
           ID-2: swap-1 size: 8.38GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
           ID-3: swap-2 size: 1.04GB used: 0.00GB (0%) fs: swap dev: /dev/zram0

           ID-4: swap-3 size: 1.04GB used: 0.00GB (0%) fs: swap dev: /dev/zram1
           ID-5: swap-4 size: 1.04GB used: 0.00GB (0%) fs: swap dev: /dev/zram2
           ID-6: swap-5 size: 1.04GB used: 0.00GB (0%) fs: swap dev: /dev/zram3
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 50.0C mobo: 29.8C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 196 Uptime: 8 min Memory: 622.4/7896.7MB
           Client: Shell (bash) inxi: 2.2.35

4
Software & Applications / Problems with ICE in P 9(SOLVED)
« on: April 20, 2020, 02:33:41 pm »
Hello Peppermint people. I recently performed a fresh install of P 9 in my desktop. I made all my ICE SSB's using Chrome, and made launchers for them in my side panel(panel 2). None of the ICE SSB's will launch from either the menu or the panel. I have never had this problem before. Any ideas on how to fix this?   :-\

5
Installation / Unable to boot after using Systemback(SOLVED)
« on: November 15, 2019, 07:11:02 am »
Hello Peppermint people, I used systemback to make a live image of my P 9 installation on my laptop. The live image was too big to make an iso file but I was able to write it to a usb memory. My intentions are to replace an upgraded P 10 system on my desktop that isn't working very good with no known solutions, I'm talking about nemo lag and freezing. The usb memory boots up fine into the live image, which is a duplicate of my laptop system, pretty cool, but there's no way of installing from it so I had to reboot the usb and select boot into live image installer. That works good, chose the partition P 10 was installed on, deleted it, reselected the partition to make new and it all went very nicely. I booted up into the Ubuntu that is controlling boot and ran sudo update-grub, alls well. rebooted into the new installation and it doesn't boot. I get this,



blkid shows this,

Code: [Select]
albert@albert-desktop ~ $ blkid
/dev/sda1: UUID="776dba26-93d1-4d68-9cca-e7773642ee82" TYPE="ext4" PARTUUID="a67c2459-9394-427d-9c72-93872332500d"
/dev/sda2: UUID="3572D87968E542C1" TYPE="ntfs" PTTYPE="dos" PARTUUID="b620e0c9-e426-42c4-9e29-952d328d9c9a"
/dev/sdb1: UUID="AE4E-959E" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="a214246a-8542-4466-9c4a-1df2c816f958"
/dev/sdb2: LABEL="SB@" UUID="f4a64468-2bd4-450b-b573-3a1dd9ded925" TYPE="ext4" PARTUUID="693e6e4e-7542-42cf-8f12-016a74d95cc7"
/dev/sdb3: UUID="edd0242f-a8d8-4387-940d-226af5ff8f1c" TYPE="ext4" PARTLABEL="Ubuntu MATE" PARTUUID="009c32e5-2b58-433f-be02-07bc4c7a99d1"
/dev/sdb4: UUID="ec363331-1864-4320-8998-df762df7e905" TYPE="ext4" PARTUUID="082c684e-bea9-472b-a123-ce1380b4d599"
/dev/sdb5: UUID="b982ea7f-26e9-4dfb-b97a-ab9a8c86f66f" TYPE="swap" PARTUUID="7a49a2b9-0572-48f2-90e6-e0665bd90026"
/dev/sdb6: UUID="4c7dfcba-b030-4b6b-87f4-7b1e7466b05b" TYPE="ext4" PARTLABEL="Mint" PARTUUID="831b96ce-95b1-4c0c-a536-67ff1fbabeaf"
/dev/sdb7: UUID="530dfd1e-5d45-460e-9c95-b4b1f292a241" TYPE="ext4" PARTLABEL="kubuntu" PARTUUID="2bffbc02-e806-4d40-a0de-412cbd124a26"
/dev/sdb8: UUID="e7723a02-d9bc-463c-a012-07ddff2cb9a3" TYPE="ext4" PARTLABEL="feren" PARTUUID="70cc89e5-6a94-48b1-8bc4-0b3ae56e6bc5"
/dev/sdb9: UUID="d3cf32d0-fbfc-4ea4-94b3-fd73148c5090" TYPE="ext4" PARTLABEL="peppermint 10" PARTUUID="bbd40eb2-85cb-4e4a-877e-3a15f0f5122e"
/dev/sdb10: UUID="640eb672-bdbc-4d71-b7d6-5956dd0bb367" TYPE="ext4" PARTLABEL="Xubuntu" PARTUUID="97dcbb4b-ab07-42d7-9f41-9af74060a6f3"

The fstab of the installation shows this

Code: [Select]
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda9 during installation
UUID=f4a64468-2bd4-450b-b573-3a1dd9ded925   /   ext4   noatime,errors=remount-ro   0   1

I think the UUID that is being shown as not existing was from the first attempt to install without deleting the partition and just selecting it to install into?

The UUID of the prior P 10 installation was

Code: [Select]
/dev/sdb2: UUID="b4054ac1-50c6-4114-8cd2-cc8384f1d361" TYPE="ext4" PARTLABEL="peppermint" PARTUUID="57ec59fa-6ea7-4c2f-bd07-a8494e062af7"
Any ideas on how to fix this?   :-\

6
Installation / Unable to boot into an earlier kernel(SOLVED)
« on: November 12, 2019, 07:25:06 pm »
Hello Peppermint people, I'm having a problem booting into a different kernel, every time I select a different kernel to boot up, I get the message that I have to load the kernel first. This could be problematic if I really needed to boot a different kernel. How can I fix this?

7
Software & Applications / Nemo Freezing
« on: July 22, 2019, 07:18:05 am »
Hello Peppermint people. There was a post started about nemo slowing to a crawl, see here. There was no actual solution but I think I can verify that it is the newer version of nemo that is causing this. Nemo version 4.0.6 in my P 10 freezes when trying to save a simple scan to it. I noticed that nemo version 3.6.5 in P 9 works just fine as it always has, in my opinion. So I want to dump the 4.0.6 version of nemo and install the 3.6.5 version. How do I do that?  :-\

8
Hardware / Unable to print from HP 2529 Printer(SOLVED)
« on: June 11, 2019, 08:50:17 am »
Hello Peppermint people. This is new, just popped up this morning while trying to print a couple of forms. The scanner works okay. Not sure what's going on.

 
 

9
General Discussion / Replicating P 10 into another partiton
« on: May 25, 2019, 10:31:10 pm »
Hello Peppermint people.  Since my P 9 and P 10 systems are running flawlessly, I got bored and thought I would try "cloning" the P 10 installation into another partition. I had read in a Ubuntu group post about copying and restoring Software using apt-clone. I've tried using Aptik before but it didn't work so well. So first I made a Timeshift snapshot of P 10, then installed apt-clone. Then I had to make a directory to store the package list, I put it into my Documents folder since I have a DATA partition, so I don't have to use external memory devices. My code for that was
Code: [Select]
mkdir ~/Documents/mypackagesTo make the list, I ran
Code: [Select]
sudo apt-clone clone ~/Documents/mypackages --with-dpkg-repackLooking in mypackages, I got the file name
Code: [Select]
apt-clone-state-albert-desktop.tar.gzSo then I did a fresh install of P 10 into the empty partition, once finished I booted into P 9 and restored the snapshot of the original P 10 into the new P 10. Then I booted into the new P 10 and installed apt-clone and ran
Code: [Select]
sudo apt-clone restore ~/Documents/mypackages/apt-clone-state-albert-desktop.tar.gzEverything got installed except the Ice SSB's I had made and Gradio's library list which I added. I had to remake my symlinks for my home folders and my side panel didn't duplicate or even show up but I would call it a success. Anyway, I thought I would share that with you guys.  :)

10
Software & Applications / Problems with Virtual machine.(SOLVED)
« on: May 07, 2019, 03:47:06 pm »
Hello Peppermint people. I'm trying to boot up windows 7 in my virtual machine, not a problem on my old computer, but since I got this new one, I'm running into little problems. I don't have HDMI output and there are driver updates for the Radeon 7 video gpu but I need to know what version the thing is. According to AMD, windows can auto detect the equipment and give me a couple of codes that will get me the model number. Anyway, when I try to boot w 7, I get this message and it doesn't boot.
Code: [Select]
VT-x/AMD-V hardware acceleration is not available on your system. Your 64-bit guest will fail to detect a 64-bit CPU and will not be able to boot.

Anybody have an idea of how I can fix this or where I can find help?
 
This is my system

Code: [Select]
albert@albert-desktop ~ $ inxi -Fz
System:    Host: albert-desktop Kernel: 5.0.0-050000-generic x86_64 bits: 64
           Desktop: N/A Distro: Peppermint Nine
Machine:   Device: desktop Mobo: Micro-Star model: A320M PRO-M2 (MS-7B84) v: 1.0 serial: N/A
           UEFI: American Megatrends v: 1.Q4 date: 12/06/2018
CPU:       Quad core AMD A8-9600 RADEON R7 10 COMPUTE CORES 4C+6G (-MCP-)
           cache: 4096 KB
           clock speeds: max: 3100 MHz 1: 3292 MHz 2: 1754 MHz 3: 1555 MHz
           4: 1517 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Wani [Radeon R5/R6/R7 Graphics]
           Display Server: x11 (X.Org 1.19.6 )
           drivers: ati,amdgpu (unloaded: modesetting,fbdev,vesa,radeon)
           Resolution: 1920x1080@60.00hz
           OpenGL: renderer: AMD CARRIZO (DRM 3.27.0, 5.0.0-050000-generic, LLVM 7.0.0)
           version: 4.5 Mesa 18.2.8
Audio:     Card-1 Advanced Micro Devices [AMD/ATI] Kabini HDMI/DP Audio
           driver: snd_hda_intel
           Card-2 Advanced Micro Devices [AMD] Family 15h (Models 60h-6fh) Audio Controller
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k5.0.0-050000-generic
Network:   Card: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
           driver: r8169
           IF: enp27s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 500.1GB (27.2% used)
           ID-1: /dev/sda model: Samsung_SSD_860 size: 500.1GB
Partition: ID-1: / size: 48G used: 29G (63%) fs: ext4 dev: /dev/sda2
           ID-2: swap-1 size: 8.39GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 48.9C mobo: N/A gpu: 49.0
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 229 Uptime: 26 min Memory: 1468.9/7482.3MB
           Client: Shell (bash) inxi: 2.3.56

 :(

11
What are you running Peppermint on? / Janus Desktop
« on: May 06, 2019, 06:21:59 pm »
Hello peppermint people. I just got a new computer. It came with a 1tb spinner hard drive with windows installed. I thought I was going to have problems with secure boot and all of that so I wanted to figure it all out before I swapped the hard drive for my SSD with P 9 and others all ready to go. I never did figure how to get into bios but I did figure out how to boot a usb memory. So I tried dual booting with windows just for the hell of it, installation failed due to boot loader not being installed so I just went ahead and let P 9 installer erase the disk. All went well and it booted up fine so I went ahead and swapped the hard drives. This is the new computer:

Code: [Select]
albert@albert-desktop ~ $ inxi -Fz
System:    Host: albert-desktop Kernel: 5.0.0-050000-generic x86_64 bits: 64
           Desktop: N/A Distro: Peppermint Nine
Machine:   Device: desktop Mobo: Micro-Star model: A320M PRO-M2 (MS-7B84) v: 1.0 serial: N/A
           UEFI: American Megatrends v: 1.Q4 date: 12/06/2018
CPU:       Quad core AMD A8-9600 RADEON R7 10 COMPUTE CORES 4C+6G (-MCP-)
           cache: 4096 KB
           clock speeds: max: 3100 MHz 1: 1999 MHz 2: 2095 MHz 3: 1939 MHz
           4: 1932 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] Wani [Radeon R5/R6/R7 Graphics]
           Display Server: x11 (X.Org 1.19.6 )
           drivers: ati,amdgpu (unloaded: modesetting,fbdev,vesa,radeon)
           Resolution: 1920x1080@60.00hz
           OpenGL: renderer: AMD CARRIZO (DRM 3.27.0, 5.0.0-050000-generic, LLVM 7.0.0)
           version: 4.5 Mesa 18.2.8
Audio:     Card-1 Advanced Micro Devices [AMD/ATI] Kabini HDMI/DP Audio
           driver: snd_hda_intel
           Card-2 Advanced Micro Devices [AMD] Family 15h (Models 60h-6fh) Audio Controller
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k5.0.0-050000-generic
Network:   Card: Realtek RTL8111/8168/8411 PCIE Gigabit Ethernet Controller
           driver: r8169
           IF: enp27s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 500.1GB (27.2% used)
           ID-1: /dev/sda model: Samsung_SSD_860 size: 500.1GB
Partition: ID-1: / size: 48G used: 29G (63%) fs: ext4 dev: /dev/sda2
           ID-2: swap-1 size: 8.39GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 47.8C mobo: N/A gpu: 47.0
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 223 Uptime: 1:23 Memory: 1248.0/7482.3MB
           Client: Shell (bash) inxi: 2.3.56

12
Hardware / Lost HDMI output to second monitor
« on: April 24, 2019, 08:30:44 pm »
Hello Peppermint people. Has any one else experienced this or know what could be wrong to cause a working HDMI output to go from one day to the next and stop working? I bought a new graphics card thinking that was the problem and it wasn't. The card is a Nvidia Geforce GT 710. When it made no difference, I installed the proprietary driver and still no difference. I checked the cable by connecting the computer end to my laptop and that works so I know the cable and monitor aren't the problem. Could this be a motherboard problem and I should have bought a motherboard instead of a graphics card? Or could it be a PSU getting weak and not sending enough juice to the pcie slot?  HOLD THE PHONE. The card just kicked in as I was typing and now I have output with the HDMI port. Wow, weird stuff. Never mind.  ???

13
Hello Peppermint people. Well it seems I'm not out of the woods yet. After swapping hard drives, the system was booting up n bout 25 seconds but after I went in and made new partitions on the unallocated area, which involved moving the swap partition to the right so I could grow the DATA partition and creating about 5 more smaller 30g partitions. boot up was horrendous again like it had been after I tried copying partitions from one hard drive to this one.  It took about 3 minutes to boot up into P9. Well this time i remembered about checking the fstab of the swap partition and sure enough, it had changed. So after changing the entry in fstab, now it takes about a minute and a half to boot up. I want to get back to 25 seconds. What can I do?

Here is some info:
Code: [Select]
albert@albert-desktop ~ $ systemd-analyze time
Startup finished in 14.309s (firmware) + 16.902s (loader) + 36.467s (kernel) + 24.835s (userspace) = 1min 32.514s
graphical.target reached after 24.821s in userspace


albert@albert-desktop ~ $ systemd-analyze critical-chain
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @24.821s
└─udisks2.service @7.166s +17.654s
  └─basic.target @7.116s
    └─sockets.target @7.116s
      └─dbus.socket @7.116s
        └─sysinit.target @7.113s
          └─systemd-timesyncd.service @988ms +371ms
            └─systemd-tmpfiles-setup.service @922ms +38ms
              └─local-fs.target @900ms
                └─run-user-1000-doc.mount @9.984s
                  └─run-user-1000.mount @8.648s
                    └─swap.target @867ms
                      └─dev-disk-by\x2duuid-138182a8\x2dba6b\x2d4120\x2d8908\x2de76f9d
                        └─dev-disk-by\x2duuid-138182a8\x2dba6b\x2d4120\x2d8908\x2de76f

There are a couple of things I need guidance on. First of all, what can I change and secondly, how do I make those changes. Remember, I have no idea of how to do what "tweaks" people perform, like VinDSL(man I hope he jumps in on this).Thanks guys. Incidentally, The other distro I have installed is Ubuntu, not Lubuntu, and after changing the swap fstab entry for it, it booted up relatively quick. It seems like it is taking an eternity to get where the screen gives the message "gave up on waiting..." Thanks guys   :)

14
GNU/Linux Discussion / Cloning Hard drives refresher course
« on: March 19, 2019, 06:52:43 pm »
Hello Peppermint people. I just want to be sure I'm going to do this right. I currently have a 250gb UEFI hard drive installed in my desktop.  I am going to replace it with a 500gb Hard drive. I'm planning on installing the new hard drive where the optical drive is, or at least use it's sata and power cables for this operation. So first of all, while in Peppermint, I'll run gparted and create  a GPT partition table in the new hard drive, or is that even necessary? I should then get a  disc ID such as sdb.  According to what I've found, I can then reboot into a live session and run in the terminal either
 
Code: [Select]
dd if=/dev/sda of=/dev/sdb bs=64k  or
 
Code: [Select]
sudo ddrescue -v /dev/sda /dev/sdb   of course I'll have to ensure ddrescue is installed for this method.
How am I doing, is this correct? Am I missing anything? This is my first time doing something like this so I just want a little assurance. Once I'm done, I'll take the 250gb hard drive and put it into my laptop and I'll have SSD's in both my computers. Thanks guys.   :)

15
Software & Applications / Adding to Gimp(SOLVED)
« on: February 28, 2019, 10:31:46 am »
Hello Peppermint People. I need help at installing a zip file into Gimp's script folder. If I chose to extract the file to
/usr/share/gimp/2.0/scripts, I get a message that I don't have necessary permissions to do it. What would be the proper method to do this? It's probably something simple that I just don't know about.  :-\

Pages: [1] 2 3 ... 9