Peppermint OS Community Forum

Resources => Official Tutorials => Topic started by: zebedeeboss on November 19, 2019, 03:44:06 am

Title: Video Tutorial on How to encapsulate your terminal output
Post by: zebedeeboss on November 19, 2019, 03:44:06 am
Video Tutorial Link https://youtu.be/jcqQ38PsYww (https://youtu.be/jcqQ38PsYww)

This will hopefully show how to encapsulate your terminal output.  The output below is used during the short video.

I would suggest watching this FULL Screen on YouTube

Spoiler (click here to view / hide)
zebedee@pep10-virt-2950x ~ $ inxi -Fz
System:    Host: pep10-virt-2950x Kernel: 5.0.0-36-generic x86_64 bits: 64
           Desktop: N/A Distro: Peppermint Ten
Machine:   Device: kvm System: QEMU product: Standard PC (i440FX + PIIX 1996) v: pc-i440fx-bionic serial: N/A
           Mobo: N/A model: N/A serial: N/A
           BIOS: SeaBIOS v: 1.10.2-1ubuntu1 date: 04/01/2014
CPU(s):    2 Single core AMD EPYC (with IBPB)s (-MT-SMP-) cache: 1024 KB
           clock speeds: max: 3999 MHz 1: 3999 MHz 2: 3999 MHz
Graphics:  Card: Red Hat QXL paravirtual graphic card
           Display Server: x11 (X.Org 1.20.4 )
           drivers: (unloaded: modesetting,fbdev,vesa)
           Resolution: 1920x1080@60.00hz
           OpenGL: renderer: llvmpipe (LLVM 8.0, 128 bits) version: 3.3 Mesa 19.0.8
Audio:     Card Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Def. Audio Controller
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k5.0.0-36-generic
Network:   Card: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
           driver: 8139cp
           IF: ens3 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 21.5GB (30.8% used)
           ID-1: /dev/sda model: QEMU_HARDDISK size: 21.5GB
Partition: ID-1: / size: 20G used: 6.2G (34%) fs: ext4 dev: /dev/sda1
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 157 Uptime: 2 min Memory: 638.9/3942.4MB
           Client: Shell (bash) inxi: 2.3.56
zebedee@pep10-virt-2950x ~ $
[close]

Code: [Select]
zebedee@pep10-virt-2950x ~ $ inxi -Fz
System:    Host: pep10-virt-2950x Kernel: 5.0.0-36-generic x86_64 bits: 64
           Desktop: N/A Distro: Peppermint Ten
Machine:   Device: kvm System: QEMU product: Standard PC (i440FX + PIIX 1996) v: pc-i440fx-bionic serial: N/A
           Mobo: N/A model: N/A serial: N/A
           BIOS: SeaBIOS v: 1.10.2-1ubuntu1 date: 04/01/2014
CPU(s):    2 Single core AMD EPYC (with IBPB)s (-MT-SMP-) cache: 1024 KB
           clock speeds: max: 3999 MHz 1: 3999 MHz 2: 3999 MHz
Graphics:  Card: Red Hat QXL paravirtual graphic card
           Display Server: x11 (X.Org 1.20.4 )
           drivers: (unloaded: modesetting,fbdev,vesa)
           Resolution: 1920x1080@60.00hz
           OpenGL: renderer: llvmpipe (LLVM 8.0, 128 bits) version: 3.3 Mesa 19.0.8
Audio:     Card Intel 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Def. Audio Controller
           driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k5.0.0-36-generic
Network:   Card: Realtek RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
           driver: 8139cp
           IF: ens3 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 21.5GB (30.8% used)
           ID-1: /dev/sda model: QEMU_HARDDISK size: 21.5GB
Partition: ID-1: / size: 20G used: 6.2G (34%) fs: ext4 dev: /dev/sda1
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 157 Uptime: 2 min Memory: 638.9/3942.4MB
           Client: Shell (bash) inxi: 2.3.56
zebedee@pep10-virt-2950x ~ $



Regards Zeb...