Choose style:

Author Topic: Peppermint 10 on an HP 9470m  (Read 64 times)

0 Members and 1 Guest are viewing this topic.

Offline stevesveryown

  • Member
  • ***
  • Posts: 221
  • Karma: 39
  • Peppermint Fan
    • View Profile
    • stevesveryown
  • Peppermint version(s): Peppermint 8, 9 & 10!!!!
Peppermint 10 on an HP 9470m
« on: September 27, 2019, 12:33:00 pm »
Hi all,

Pepp 10 has a new home on my laptops.  I never realized a laptop I was given, the HP 9470m, had a Kingston 180gig ssd and upgradable to 16gig of memory. I did have CloudReady installed on it, no wonder it was so fast.

I want to say Pepp10 is now lightning fast.

Boot time
Spoiler (click here to view / hide)
stevesveryown@stevesveryown-HP-EliteBook-Folio-9470m ~ $ systemd-analyze blame
          1.289s dev-sda1.device
           781ms gpu-manager.service
           672ms plymouth-quit-wait.service
           661ms hddtemp.service
           611ms mintsystem.service
           552ms networkd-dispatcher.service
           515ms systemd-backlight@backlight:intel_backlight.service
           503ms snapd.service
           487ms systemd-journal-flush.service
           455ms udisks2.service
           382ms NetworkManager.service
           351ms ModemManager.service
           319ms lightdm.service
           309ms accounts-daemon.service
           244ms thermald.service
           226ms grub-common.service
           185ms rsyslog.service
           173ms avahi-daemon.service
           166ms systemd-journald.service
           159ms smbd.service
           146ms swapfile.swap
           140ms rpcbind.service
           138ms apparmor.service
           138ms systemd-logind.service
           136ms systemd-resolved.service
[close]
:o

System info
Spoiler (click here to view / hide)
Code: [Select]
System:    Host: stevesveryown-HP-EliteBook-Folio-9470m Kernel: 5.0.0-29-generic x86_64
           bits: 64 gcc: 7.4.0
           Desktop: N/A Distro: Peppermint Ten
Machine:   Device: laptop System: Hewlett-Packard product: HP EliteBook Folio 9470m v: A1029D1103 serial: N/A
           Mobo: Hewlett-Packard model: 18DF v: KBC Version 62.19 serial: N/A
           BIOS: Hewlett-Packard v: 68IBD Ver. F.72 date: 07/27/2018
Battery    BAT0: charge: 36.5 Wh 97.3% condition: 37.5/37.5 Wh (100%)
           model: Hewlett-Packard Primary status: N/A
CPU:       Dual core Intel Core i5-3427U (-MT-MCP-)
           arch: Ivy Bridge rev.9 cache: 3072 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 9179
           clock speeds: max: 2800 MHz 1: 1014 MHz 2: 979 MHz 3: 1229 MHz
           4: 1057 MHz
Graphics:  Card: Intel 3rd Gen Core processor Graphics Controller bus-ID: 00:02.0
           Display Server: x11 (X.Org 1.20.4 ) driver: intel
           Resolution: 1366x768@60.06hz
           OpenGL: renderer: Mesa DRI Intel Ivybridge Mobile
           version: 4.2 Mesa 19.0.8 Direct Render: Yes
Audio:     Card Intel 7 Series/C216 Family High Def. Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0
           Sound: Advanced Linux Sound Architecture v: k5.0.0-29-generic
Network:   Card-1: Intel 82579LM Gigabit Network Connection (Lewisville)
           driver: e1000e v: 3.2.6-k port: 2080 bus-ID: 00:19.0
           IF: enp0s25 state: down mac: <filter>
           Card-2: Intel Centrino Advanced-N 6235 driver: iwlwifi bus-ID: 03:00.0
           IF: wlo1 state: up mac: <filter>
Drives:    HDD Total Size: 180.0GB (7.2% used)
           ID-1: /dev/sda model: KINGSTON_SKC300S size: 180.0GB
Partition: ID-1: / size: 165G used: 13G (8%) fs: ext4 dev: /dev/sda1
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 56.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Repos:     Active apt sources in file: /etc/apt/sources.list
           deb http://us.archive.ubuntu.com/ubuntu/ bionic main restricted
           deb http://us.archive.ubuntu.com/ubuntu/ bionic-updates main restricted
           deb http://us.archive.ubuntu.com/ubuntu/ bionic universe
           deb http://us.archive.ubuntu.com/ubuntu/ bionic-updates universe
           deb http://us.archive.ubuntu.com/ubuntu/ bionic multiverse
           deb http://us.archive.ubuntu.com/ubuntu/ bionic-updates multiverse
           deb http://us.archive.ubuntu.com/ubuntu/ bionic-backports main restricted universe multiverse
           deb http://security.ubuntu.com/ubuntu bionic-security main restricted
           deb http://security.ubuntu.com/ubuntu bionic-security universe
           deb http://security.ubuntu.com/ubuntu bionic-security multiverse
           Active apt sources in file: /etc/apt/sources.list.d/obsproject-ubuntu-obs-studio-bionic.list
           deb http://ppa.launchpad.net/obsproject/obs-studio/ubuntu bionic main
           Active apt sources in file: /etc/apt/sources.list.d/openshot_developers-ubuntu-ppa-bionic.list
           deb http://ppa.launchpad.net/openshot.developers/ppa/ubuntu bionic main
           Active apt sources in file: /etc/apt/sources.list.d/peppermint.list
           deb http://ppa.launchpad.net/peppermintos/p10-release/ubuntu bionic main
           Active apt sources in file: /etc/apt/sources.list.d/peppermintos-ubuntu-gimp-2_10_2-bionic.list
           deb http://ppa.launchpad.net/peppermintos/gimp-2.10.2/ubuntu bionic main
           Active apt sources in file: /etc/apt/sources.list.d/tista-ubuntu-adapta-bionic.list
           deb http://ppa.launchpad.net/tista/adapta/ubuntu bionic main
Info:      Processes: 205 Uptime: 7 min Memory: 766.4/3805.4MB
           Init: systemd runlevel: 5 Gcc sys: 7.4.0
           Client: Shell (bash 4.4.201) inxi: 2.3.56
[close]

The only thing to do is upgrade the memory from 4 to 16gig.

Offline PCNetSpec

  • Administrator
  • Hero
  • *****
  • Posts: 25661
  • Karma: 2819
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
  • Peppermint version(s): Peppermint 8R, 9, and 9R
Re: Peppermint 10 on an HP 9470m
« Reply #1 on: September 27, 2019, 12:38:57 pm »
No going back to spinners now Steve.
WARNING: You are logged into reality as 'root' .. logging in as 'insane' is the only safe option.

Team Peppermint
PCNetSpec