Choose style:

Author Topic: How Fast is Peppermint 10 (2.927s)  (Read 266 times)

0 Members and 1 Guest are viewing this topic.

Offline VinDSL

  • Global Moderator
  • Hero
  • *****
  • Posts: 5262
  • Karma: 942
  • Peppermint Mod
    • View Profile
  • Peppermint version(s): Developmental Builds
How Fast is Peppermint 10 (2.927s)
« on: May 20, 2019, 01:12:12 am »
And, yes, Peppermint 10 flies like the wind...  8)


Code: [Select]
vindsl@Drool ~ $ systemd-analyze time
Startup finished in 2.107s (kernel) + 819ms (userspace) = 2.927s
graphical.target reached after 815ms in userspace

vindsl@Drool ~ $ systemd-analyze critical-chain | more
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.

graphical.target @815ms
└─udisks2.service @525ms +290ms
  └─basic.target @504ms
    └─sockets.target @504ms
      └─dbus.socket @504ms
        └─sysinit.target @502ms
          └─systemd-update-utmp.service @497ms +4ms
            └─systemd-tmpfiles-setup.service @489ms +7ms
              └─local-fs.target @487ms
                └─home.mount @477ms +9ms
                  └─systemd-fsck@dev-disk-by\x2duuid-4237e26a\x2d2cfb\x2d47b5\x2d9c2d\x2d8b64c546871b.service @376ms +100ms
                    └─dev-disk-by\x2duuid-4237e26a\x2d2cfb\x2d47b5\x2d9c2d\x2d8b64c546871b.device @367ms

All Hail Drool, The Dog Faced Goblin
vindsl@Drool ~ $ sudo inxi -CDGMSfimuxxxz -v 7
System:    Host: Drool Kernel: 5.0.0-13-generic x86_64 bits: 64 gcc: 8.3.0 Console: tty 0 dm: lightdm
           Distro: Peppermint Ten
Machine:   Device: desktop System: Dell product: OptiPlex 7010 v: 01 serial: <filter>
           Mobo: Dell model: 0YXT71 v: A01 serial: <filter> UEFI: Dell v: A29 date: 06/28/2018
           Chassis: type: 3 serial: <filter>
CPU:       Quad core Intel Core i7-3770 (-MT-MCP-) arch: Ivy Bridge rev.9 cache: 8192 KB bmips: 27139
           clock speeds: min/max: 1600/3900 MHz 1: 1597 MHz 2: 1596 MHz 3: 1596 MHz 4: 1596 MHz 5: 1596 MHz
           6: 1596 MHz 7: 1596 MHz 8: 1596 MHz
           CPU Flags: acpi aes aperfmperf apic arat arch_perfmon avx bts clflush cmov constant_tsc cpuid
           cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept erms est f16c flexpriority flush_l1d fpu
           fsgsbase fxsr ht ibpb ibrs ida lahf_lm lm mca mce mmx monitor msr mtrr nonstop_tsc nopl nx pae pat pbe
           pcid pclmulqdq pdcm pebs pge pln pni popcnt pse pse36 pti pts rdrand rdtscp rep_good sep smep smx ss
           ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow tsc tsc_deadline_timer vme vmx vnmi
           vpid x2apic xsave xsaveopt xtopology xtpr
Memory:    Array-1 capacity: 32 GB devices: 4 EC: None
           Device-1: DIMM3 size: 4 GB speed: 1600 MT/s type: DDR3 (Synchronous)
           bus width: 64 bits manufacturer: Hynix/Hyundai part: HMT351U6CFR8C-PB serial: <filter>
           Device-2: DIMM1 size: 4 GB speed: 1600 MT/s type: DDR3 (Synchronous)
           bus width: 64 bits manufacturer: Hynix/Hyundai part: HMT351U6CFR8C-PB serial: <filter>
           Device-3: DIMM4 size: 4 GB speed: 1600 MT/s type: DDR3 (Synchronous)
           bus width: 64 bits manufacturer: Hynix/Hyundai part: HMT351U6CFR8C-PB serial: <filter>
           Device-4: DIMM2 size: 4 GB speed: 1600 MT/s type: DDR3 (Synchronous)
           bus width: 64 bits manufacturer: Hynix/Hyundai part: HMT351U6CFR8C-PB serial: <filter>
           Device-5: N/A size: N/A speed: N/A type: N/A bus width: N/A manufacturer: N/A part: N/A serial: N/A
           Device-6: N/A size: N/A speed: N/A type: N/A bus width: N/A manufacturer: N/A part: N/A serial: N/A
Graphics:  Card: NVIDIA GK208B [GeForce GT 730] bus-ID: 01:00.0 chip-ID: 10de:1287
           Display Server: X.Org 1.20.1 drivers: fbdev,nouveau (unloaded: modesetting,vesa)
           Resolution: 1920x1200@77.00hz
           OpenGL: renderer: llvmpipe (LLVM 7.0, 256 bits)
           version: 3.3 Mesa 18.2.8 (compat-v: 3.1) Direct Render: Yes
Audio:     Card-1 Intel 7 Series/C216 Family High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 00:1b.0 chip-ID: 8086:1e20
           Card-2 NVIDIA GK208 HDMI/DP Audio Controller driver: snd_hda_intel bus-ID: 01:00.1 chip-ID: 10de:0e0f
           Sound: Advanced Linux Sound Architecture v: k5.0.0-13-generic
Network:   Card: Intel 82541PI Gigabit Ethernet Controller
           driver: e1000 v: 7.3.21-k8-NAPI port: d000 bus-ID: 02:02.0 chip-ID: 8086:107c
           IF: enp2s2 state: up speed: 1000 Mbps duplex: full mac: <filter>
           WAN IP: <filter>
           IF: enp2s2 ip-v4: <filter> ip-v6-link: <filter>
Drives:    HDD Total Size: 1320.3GB (0.5% used)
           ID-1: /dev/sda model: CT1000MX500SSD1 size: 1000.2GB serial: <filter> temp: 40C
           ID-2: /dev/sdb model: ST320LT009 size: 320.1GB serial: <filter> temp: 35C
           Optical-1: /dev/sr0 model: MATSHITA DVD-ROM SW420 rev: D.02 dev-links: cdrom,dvd
           Features: speed: 48x multisession: yes audio: yes dvd: yes rw: none state: running
Partition: ID-1: / size: 20G used: 5.2G (28%) fs: ext4 dev: /dev/sda5
           label: Root uuid: ef3b70df-d3ea-4553-9f5c-d730fc8b53f6
           ID-2: /boot/efi size: 300M used: 6.1M (3%) fs: vfat dev: /dev/sda1 label: UEFI uuid: 2D36-30F3
           ID-3: /home size: 59G used: 1.2G (2%) fs: ext4 dev: /dev/sda6
           label: Home uuid: 4237e26a-2cfb-47b5-9c2d-8b64c546871b
           ID-4: swap-1 size: 0.54GB used: 0.00GB (0%) fs: swap dev: /dev/sda7
           label: N/A uuid: ffd87f10-1018-4dfe-955d-ceae74cc64b2
RAID:      System: supported: N/A
           No RAID devices: /proc/mdstat, md_mod kernel module present
           Unused Devices: none
Unmounted: ID-1: /dev/sda2 size: 21.47G fs: ext4 label: N/A uuid: 71243b7b-60f2-4d90-8282-271c159d1982
           ID-2: /dev/sda3 size: 64.43G fs: ext4 label: N/A uuid: f4c3bcf8-c165-47a3-a909-ead4a3877203
           ID-3: /dev/sda4 size: 0.54G fs: swap label: Swap uuid: d9aebe01-4915-4cdb-9693-e9ea05e51cef
           ID-4: /dev/sdb1 size: 0.10G fs: NTFS label: System Reserved uuid: F84CF3214CF2D8F8
           ID-5: /dev/sdb2 size: 319.97G fs: NTFS label: N/A uuid: 925EF5265EF503AF
Sensors:   System Temperatures: cpu: 36.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 212 Uptime: 1 min Memory: 407.5/16023.5MB Init: systemd v: 237 runlevel: 5 Gcc sys: 7.4.0
           Client: Shell (sudo running in bash) inxi: 2.3.56
vindsl@Drool ~ $
[close]
« Last Edit: May 26, 2019, 06:48:24 pm by VinDSL, Reason: Updated Purdy Pic »

Offline PCNetSpec

  • Administrator
  • Hero
  • *****
  • Posts: 25502
  • Karma: 2808
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
  • Peppermint version(s): Peppermint 8R, 9, and 9R
Re: How Fast is Peppermint 10?
« Reply #1 on: May 20, 2019, 07:27:05 am »
It gets that from me .. I'm full of wind :-X
(in fact it continually leaks)
WARNING: You are logged into reality as 'root' .. logging in as 'insane' is the only safe option.

Team Peppermint
PCNetSpec