Author Topic: Teamviewer 13...(Unsolved Mystery)  (Read 3334 times)

Offline Kbrewer

  • Jr. Member
  • **
  • Posts: 29
  • Karma: 1
  • New Forum User
    • View Profile
  • Peppermint version(s): Peppermint 7
Re: Teamviewer 13
« Reply #15 on: August 05, 2018, 05:19:21 pm »
kevin@kevin-Dimension-2400 ~ $ inxi -Fz
System:    Host: kevin-Dimension-2400 Kernel: 4.4.0-131-generic i686 (32 bit)
           Desktop: N/A Distro: Peppermint Seven
Machine:   System: Dell product: Dimension 2400
           Mobo: Dell model: 0G1548 v: A00 Bios: Dell v: A05 date: 12/02/2003
CPU:       Single core Intel Pentium 4 (-UP-) cache: 512 KB
           speed: 2657 MHz (max)
Graphics:  Card: Intel 82845G/GL[Brookdale-G]/GE Integrated Graphics Device
           Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1280x1024@60.02hz
           GLX Renderer: Mesa DRI Intel 845G x86/MMX/SSE2
           GLX Version: 1.3 Mesa 18.0.5
Audio:     Card Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller
           driver: snd_intel8x0
           Sound: Advanced Linux Sound Architecture v: k4.4.0-131-generic
Network:   Card-1: Broadcom BCM4401 100Base-T driver: b44
           IF: eth0 state: down mac: <filter>
           Card-2: Belkin F6D4050 N150 Enhanced Wireless Network Adapter v2000 [Ralink RT3070]
           driver: rt2800usb
           IF: wlx944452276958 state: N/A mac: N/A
Drives:    HDD Total Size: 240.1GB (7.4% used)
           ID-1: /dev/sda model: ST3160812AV size: 160.0GB
           ID-2: /dev/sdb model: WDC_WD800JB size: 80.0GB
Partition: ID-1: / size: 146G used: 16G (12%) fs: ext4 dev: /dev/sda1
           ID-2: swap-1 size: 1.07GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 155 Uptime: 2 min Memory: 393.2/998.2MB
           Client: Shell (bash) inxi: 2.2.35
kevin@kevin-Dimension-2400 ~ $


Had to reboot my computer terminal had it locked up said it had a running process. Done this after reboot

Offline PCNetSpec

  • Administrator
  • Hero
  • *****
  • Posts: 26452
  • Karma: 65531
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
  • Peppermint version(s): Peppermint 10
Re: Teamviewer 13
« Reply #16 on: August 05, 2018, 05:31:24 pm »
What's the output from:
Code: [Select]
/opt/teamviewer/tv_bin/script/teamviewer --info
When posting the output, please replace your teamviewer ID with XXXXXXXXXXXXX
« Last Edit: August 05, 2018, 05:34:26 pm by PCNetSpec »
WARNING: You are logged into reality as 'root' .. logging in as 'insane' is the only safe option.

Team Peppermint
PCNetSpec

Offline Kbrewer

  • Jr. Member
  • **
  • Posts: 29
  • Karma: 1
  • New Forum User
    • View Profile
  • Peppermint version(s): Peppermint 7
Re: Teamviewer 13
« Reply #17 on: August 05, 2018, 05:45:01 pm »
kevin@kevin-Dimension-2400 ~ $ /opt/teamviewer/tv_bin/script/teamviewer --info

 TeamViewer                           13.1.1548  (DEB)

 TeamViewer ID:                        xxxxxxxxx

 teamviewerd status                   ● teamviewerd.service - TeamViewer remote control daemon
   Loaded: loaded (/etc/systemd/system/teamviewerd.service; enabled; vendor preset: enabled)
   Active: active (running) since Sun 2018-08-05 19:14:36 CDT; 26min ago
  Process: 1199 ExecStart=/opt/teamviewer/tv_bin/teamviewerd -d (code=exited, status=0/SUCCESS)
 Main PID: 1365 (teamviewerd)
   CGroup: /system.slice/teamviewerd.service
           └─1365 /opt/teamviewer/tv_bin/teamviewerd -d

Aug 05 19:14:32 kevin-Dimension-2400 systemd[1]: Starting TeamViewer remote control daemon...
Aug 05 19:14:36 kevin-Dimension-2400 systemd[1]: teamviewerd.service: PID file /var/run/teamviewerd.pid not readable (yet?) after start: No such file or directory
Aug 05 19:14:36 kevin-Dimension-2400 systemd[1]: Started TeamViewer remote control daemon.
Aug 05 19:14:51 kevin-Dimension-2400 su[2052]: Successful su for kevin by root
Aug 05 19:14:51 kevin-Dimension-2400 su[2052]: + ??? root:kevin
Aug 05 19:14:51 kevin-Dimension-2400 su[2052]: pam_unix(su:session): session opened for user kevin by (uid=0)

The little guy is actually 3 question marks
« Last Edit: August 05, 2018, 05:50:07 pm by Kbrewer »

Offline PCNetSpec

  • Administrator
  • Hero
  • *****
  • Posts: 26452
  • Karma: 65531
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
  • Peppermint version(s): Peppermint 10
Re: Teamviewer 13
« Reply #18 on: August 06, 2018, 05:25:45 am »
What's the output from
Code: [Select]
tail -n 50 ~/.local/share/teamviewer13/logfiles/*.log?

Just a thought, have you tried AnyDesk instead ?
https://anydesk.com/download?os=linux
WARNING: You are logged into reality as 'root' .. logging in as 'insane' is the only safe option.

Team Peppermint
PCNetSpec

Offline Kbrewer

  • Jr. Member
  • **
  • Posts: 29
  • Karma: 1
  • New Forum User
    • View Profile
  • Peppermint version(s): Peppermint 7
Re: Teamviewer 13
« Reply #19 on: August 06, 2018, 04:35:05 pm »
kevin@kevin-Dimension-2400 ~ $ tail -n 50 ~/.local/share/teamviewer13/logfiles/*.log
==> /home/kevin/.local/share/teamviewer13/logfiles/gui.log <==

==> /home/kevin/.local/share/teamviewer13/logfiles/startup.log <==
Init...
TeamViewer:        13.1.1548 - DEB
Profile:           /home/kevin (kevin)
Desktop:           DS: 'Peppermint'    XDG: 'LXDE'
XServer TTY:       7

ok (info)

CheckCPU: SSE2 support: yes
ok (profile)

==> /home/kevin/.local/share/teamviewer13/logfiles/TeamViewer13_Logfile.log <==
2018/08/05 19:25:36.790  3854 2953462272 GX0   ShowOtherInstance: triggered existing instance.
      Quitting...
2018/08/05 19:37:56.218  4629 2953310720 GX0   ShowOtherInstance: triggered existing instance.
      Quitting...

Offline Kbrewer

  • Jr. Member
  • **
  • Posts: 29
  • Karma: 1
  • New Forum User
    • View Profile
  • Peppermint version(s): Peppermint 7
Re: Teamviewer 13
« Reply #20 on: August 06, 2018, 04:37:22 pm »
Dont think I tried that one but have tried a couple others that didnt even show up any where as a program

Offline PCNetSpec

  • Administrator
  • Hero
  • *****
  • Posts: 26452
  • Karma: 65531
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
  • Peppermint version(s): Peppermint 10
Re: Teamviewer 13
« Reply #21 on: August 06, 2018, 04:59:38 pm »
kevin@kevin-Dimension-2400 ~ $ tail -n 50 ~/.local/share/teamviewer13/logfiles/*.log
==> /home/kevin/.local/share/teamviewer13/logfiles/gui.log <==

==> /home/kevin/.local/share/teamviewer13/logfiles/startup.log <==
Init...
TeamViewer:        13.1.1548 - DEB
Profile:           /home/kevin (kevin)
Desktop:           DS: 'Peppermint'    XDG: 'LXDE'
XServer TTY:       7

ok (info)

CheckCPU: SSE2 support: yes
ok (profile)

==> /home/kevin/.local/share/teamviewer13/logfiles/TeamViewer13_Logfile.log <==
2018/08/05 19:25:36.790  3854 2953462272 GX0   ShowOtherInstance: triggered existing instance.
      Quitting...
2018/08/05 19:37:56.218  4629 2953310720 GX0   ShowOtherInstance: triggered existing instance.
      Quitting...

Surely there was more output than that ?
WARNING: You are logged into reality as 'root' .. logging in as 'insane' is the only safe option.

Team Peppermint
PCNetSpec

Offline PCNetSpec

  • Administrator
  • Hero
  • *****
  • Posts: 26452
  • Karma: 65531
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
  • Peppermint version(s): Peppermint 10
Re: Teamviewer 13
« Reply #22 on: August 06, 2018, 07:22:35 pm »
Okay I've removed those last 2 posts because the output contained the user ID .. not a major security risk, but no point advertising it right :)

I couldn't see any problem .. so I'm gonna need to install PM7 in a VM for testing (as I'm currently running PM9).

Have you ever messed around with the window manager in Peppermint ? .. because Google seems to suggest this can happen in TeamViewer 13 when it cannot identify the window manager.
(though your screenshots seem to suggest you're still using the default xfwm4 :-\)
« Last Edit: August 06, 2018, 07:25:53 pm by PCNetSpec »
WARNING: You are logged into reality as 'root' .. logging in as 'insane' is the only safe option.

Team Peppermint
PCNetSpec

Offline TonyBronze

  • Member
  • ***
  • Posts: 160
  • Karma: 34
  • Peppermintaholic
    • View Profile
  • Peppermint version(s): 8 & 9
Re: Teamviewer 13
« Reply #23 on: August 06, 2018, 08:36:09 pm »
Can you open a terminal with Teamviewer closed and run:

Code: [Select]
mv -v ~/.cache/qtshadercache ~/.cache/qtshadercache-old
I set up Peppermint 7 in a virtualbox and teamviewer worked okay but I did use the 64 bit version whereas I just noticed Kbrewer is using 32 bit. 
......to infinity and beyond..............

Offline PCNetSpec

  • Administrator
  • Hero
  • *****
  • Posts: 26452
  • Karma: 65531
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
  • Peppermint version(s): Peppermint 10
Re: Teamviewer 13
« Reply #24 on: August 07, 2018, 06:38:17 am »
This may just turn out to be one of those things where a Pentium 4 and old Intel graphics just aren't up to the job any more (but I can't test this) .. which is why I'd like the OP to try say AnyDesk.
WARNING: You are logged into reality as 'root' .. logging in as 'insane' is the only safe option.

Team Peppermint
PCNetSpec

Offline Kbrewer

  • Jr. Member
  • **
  • Posts: 29
  • Karma: 1
  • New Forum User
    • View Profile
  • Peppermint version(s): Peppermint 7
Re: Teamviewer 13
« Reply #25 on: August 07, 2018, 04:35:43 pm »
Said no such file or directory.  You may be right about my old computer, but as I stated in an earlier post I installed Ubuntu 16.4 on an old harddrive that I have and Teamviewer worked as it was supposed to only thing is I just do not like much about that program Just downloaded it to see if Teamviewer would work with it.

Offline PCNetSpec

  • Administrator
  • Hero
  • *****
  • Posts: 26452
  • Karma: 65531
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
  • Peppermint version(s): Peppermint 10
Re: Teamviewer 13...(Unsolved Mystery)
« Reply #26 on: August 10, 2018, 07:49:47 am »
Teamviewer got an update this week, did that make an difference ?
WARNING: You are logged into reality as 'root' .. logging in as 'insane' is the only safe option.

Team Peppermint
PCNetSpec