Linux firmware update to 1.157.17 fails

[kjl]

Updating firmware 1.157.15 to 1.157.17 fails with error; unexpected end of file or stream.
Other software-packages can update-install with no issues using package  manager,
terminal.
The firmware update fails, tries recover but just hangs on recovery until manually
closed.
Also having network issues on a 100mbps connection, google chrome failed to connect
on any  page with  o snap.
Don't know if the internet connection issue is causing the update issue, but not an issue on
win10 connecting through the same device.

[AndyInMokum]

Hi kjl, how's it going  ?  Welcome to the Peppermint Forum.  It's very nice to meet you  .  Could you please let us have a little more information about your computer?   Open up a terminal window with the following keystrokes:

Ctrl+Alt+t

Enter, (Copy & Paste) the following command into the terminal window and hit enter.  Post back the output to the forum:

Code: [Select]

inxi -Fz

Note:  Please remember to encapsulate terminal outputs with the Insert, Code # function.  For extra long outputs, please use the Spoiler, Sp function.  It preserves the original format of the output.  This makes it easier for future visitors to relate to their own issues.  These functions are found in the forum editor, above the,  Embarrassed and  the Cry emoticon respectively - many thanks  .

[kjl]

As per the requsted output;

Code: [Select]

kenneth@kenneth-MS-6728 ~ $ inxi -Fz
System:    Host: kenneth-MS-6728 Kernel: 4.13.0-39-generic i686 (32 bit)
           Desktop: N/A Distro: Peppermint Eight
Machine:   Mobo: MICRO-STAR model: MS-6728 v: 100
           Bios: American Megatrends v: V2.5 date: 09/29/2004
CPU:       Single core Intel Pentium 4 (-HT-) cache: 1024 KB 
           clock speeds: max: 2800 MHz 1: 2800 MHz 2: 2800 MHz
Graphics:  Card: Advanced Micro Devices [AMD/ATI] RV280 [Radeon 9200 PRO]
           Display Server: X.Org 1.19.5 drivers: ati,radeon (unloaded: fbdev,vesa)
           Resolution: 1024x768@60.00hz
           GLX Renderer: Mesa DRI R200 (RV280 5960) x86/MMX/SSE2 DRI2
           GLX Version: 1.3 Mesa 17.0.2
Audio:     Card Intel 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller
           driver: snd_intel8x0
           Sound: Advanced Linux Sound Architecture v: k4.13.0-39-generic
Network:   Card: Intel 82562EZ 10/100 Ethernet Controller driver: e100
           IF: enp2s8 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 40.0GB (17.2% used)
           ID-1: /dev/sda model: HDS728040PLA320 size: 40.0GB
Partition: ID-1: / size: 35G used: 4.5G (14%) fs: ext4 dev: /dev/sda1
           ID-2: swap-1 size: 2.15GB used: 0.00GB (0%) fs: swap dev: /dev/sda5
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   None detected - is lm-sensors installed and configured?
Info:      Processes: 143 Uptime: 23 min Memory: 554.1/2012.2MB
           Client: Shell (bash) inxi: 2.2.35 

[mac]

What happens when you run in your terminal...

Code: [Select]

sudo apt install linux-firmware

[kjl]

Code: [Select]

Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  gir1.2-networkmanager-1.0 gir1.2-nma-1.0 libido3-0.1-0
Use 'sudo apt autoremove' to remove them.
The following packages will be upgraded:
  linux-firmware
1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/45.5 MB of archives.
After this operation, 87.0 kB of additional disk space will be used.
(Reading database ... 334588 files and directories currently installed.)
Preparing to unpack .../linux-firmware_1.157.17_all.deb ...
Unpacking linux-firmware (1.157.17) over (1.157.15) ...
dpkg-deb (subprocess): decompressing archive member: lzma error: compressed data is corrupt
dpkg-deb: error: subprocess <decompress> returned error exit status 2
dpkg: error processing archive /var/cache/apt/archives/linux-firmware_1.157.17_all.deb (--unpack):
 cannot copy extracted data for './lib/firmware/ql2322_fw.bin' to '/lib/firmware/ql2322_fw.bin.dpkg-new': unexpected end of file or stream
update-initramfs: Generating /boot/initrd.img-4.13.0-39-generic
update-initramfs: Generating /boot/initrd.img-4.13.0-32-generic

Progress: [ 33%] [######################........................

[kjl]

Sorry on previous post did not let the command finish, completed results;

Code: [Select]

The following packages were automatically installed and are no longer required:
  gir1.2-networkmanager-1.0 gir1.2-nma-1.0 libido3-0.1-0
Use 'sudo apt autoremove' to remove them.
The following packages will be upgraded:
  linux-firmware
1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/45.5 MB of archives.
After this operation, 87.0 kB of additional disk space will be used.
(Reading database ... 334588 files and directories currently installed.)
Preparing to unpack .../linux-firmware_1.157.17_all.deb ...
Unpacking linux-firmware (1.157.17) over (1.157.15) ...
dpkg-deb (subprocess): decompressing archive member: lzma error: compressed data is corrupt
dpkg-deb: error: subprocess <decompress> returned error exit status 2
dpkg: error processing archive /var/cache/apt/archives/linux-firmware_1.157.17_all.deb (--unpack):
 cannot copy extracted data for './lib/firmware/ql2322_fw.bin' to '/lib/firmware/ql2322_fw.bin.dpkg-new': unexpected end of file or stream
update-initramfs: Generating /boot/initrd.img-4.13.0-39-generic
update-initramfs: Generating /boot/initrd.img-4.13.0-32-generic
Errors were encountered while processing:
 /var/cache/apt/archives/linux-firmware_1.157.17_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)

[mac]

Try this...

Code: [Select]

sudo dpkg --configure -a

Then...

Code: [Select]

sudo apt update && sudo apt upgrade

Then...

Code: [Select]

sudo dpkg --clear-avail

Then again...

Code: [Select]

sudo apt update && sudo apt upgrade

Try installing linux-firmware again

[kjl]

Same results

Spoiler (click here to view / hide)

et:1 http://security.ubuntu.com/ubuntu xenial-security InRelease [107 kB]
Hit:2 http://us.archive.ubuntu.com/ubuntu xenial InRelease                   
Get:3 http://us.archive.ubuntu.com/ubuntu xenial-updates InRelease [109 kB]         
Hit:4 http://ppa.launchpad.net/peppermintos/p8-release/ubuntu xenial InRelease       
Hit:5 http://ppa.launchpad.net/peppermintos/p8-release-llvm-toolchain-3.9/ubuntu xenial InRelease
Get:6 http://us.archive.ubuntu.com/ubuntu xenial-backports InRelease [107 kB]       
Hit:7 http://ppa.launchpad.net/peppermintos/p8-release-llvm-toolchain-4.0/ubuntu xenial InRelease
Hit:8 http://ppa.launchpad.net/peppermintos/p8-respin/ubuntu xenial InRelease
Fetched 323 kB in 2s (150 kB/s)                   
Reading package lists... Done
Building dependency tree       
Reading state information... Done
1 package can be upgraded. Run 'apt list --upgradable' to see it.
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
The following packages were automatically installed and are no longer required:
  gir1.2-networkmanager-1.0 gir1.2-nma-1.0 libido3-0.1-0
Use 'sudo apt autoremove' to remove them.
The following packages will be upgraded:
  linux-firmware
1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/45.5 MB of archives.
After this operation, 87.0 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
(Reading database ... 334665 files and directories currently installed.)
Preparing to unpack .../linux-firmware_1.157.17_all.deb ...
Unpacking linux-firmware (1.157.17) over (1.157.15) ...
dpkg-deb (subprocess): decompressing archive member: lzma error: compressed data is corrupt
dpkg-deb: error: subprocess <decompress> returned error exit status 2
dpkg: error processing archive /var/cache/apt/archives/linux-firmware_1.157.17_all.deb (--unpack):
 cannot copy extracted data for './lib/firmware/ql2322_fw.bin' to '/lib/firmware/ql2322_fw.bin.dpkg-new': unexpected end of file or stream
update-initramfs: Generating /boot/initrd.img-4.13.0-39-generic
update-initramfs: Generating /boot/initrd.img-4.13.0-32-generic
Errors were encountered while processing:
 /var/cache/apt/archives/linux-firmware_1.157.17_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)
kenneth@kenneth-MS-6728 ~ $ sudo dpkg --clear-avail
kenneth@kenneth-MS-6728 ~ $ sudo dpkg
dpkg: error: need an action option

Type dpkg --help for help about installing and deinstalling packages

• ;

Use 'apt' or 'aptitude' for user-friendly package management;
Type dpkg -Dhelp for a list of dpkg debug flag values;
Type dpkg --force-help for a list of forcing options;
Type dpkg-deb --help for help about manipulating *.deb files;

Options marked

• produce a lot of output - pipe it through 'less' or 'more' !

kenneth@kenneth-MS-6728 ~ $ sudo apt update && sudo apt upgrade
Get:1 http://security.ubuntu.com/ubuntu xenial-security InRelease [107 kB]
Hit:2 http://us.archive.ubuntu.com/ubuntu xenial InRelease                   
Get:3 http://us.archive.ubuntu.com/ubuntu xenial-updates InRelease [109 kB]         
Hit:4 http://ppa.launchpad.net/peppermintos/p8-release/ubuntu xenial InRelease       
Hit:5 http://ppa.launchpad.net/peppermintos/p8-release-llvm-toolchain-3.9/ubuntu xenial InRelease
Get:6 http://us.archive.ubuntu.com/ubuntu xenial-backports InRelease [107 kB]       
Hit:7 http://ppa.launchpad.net/peppermintos/p8-release-llvm-toolchain-4.0/ubuntu xenial InRelease
Hit:8 http://ppa.launchpad.net/peppermintos/p8-respin/ubuntu xenial InRelease
Fetched 323 kB in 1s (162 kB/s)                   
Reading package lists... Done
Building dependency tree       
Reading state information... Done
1 package can be upgraded. Run 'apt list --upgradable' to see it.
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Calculating upgrade... Done
The following packages were automatically installed and are no longer required:
  gir1.2-networkmanager-1.0 gir1.2-nma-1.0 libido3-0.1-0
Use 'sudo apt autoremove' to remove them.
The following packages will be upgraded:
  linux-firmware
1 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/45.5 MB of archives.
After this operation, 87.0 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
(Reading database ... 334665 files and directories currently installed.)
Preparing to unpack .../linux-firmware_1.157.17_all.deb ...
Unpacking linux-firmware (1.157.17) over (1.157.15) ...
dpkg-deb (subprocess): decompressing archive member: lzma error: compressed data is corrupt
dpkg-deb: error: subprocess <decompress> returned error exit status 2
dpkg: error processing archive /var/cache/apt/archives/linux-firmware_1.157.17_all.deb (--unpack):
 cannot copy extracted data for './lib/firmware/ql2322_fw.bin' to '/lib/firmware/ql2322_fw.bin.dpkg-new': unexpected end of file or stream
update-initramfs: Generating /boot/initrd.img-4.13.0-39-generic
update-initramfs: Generating /boot/initrd.img-4.13.0-32-generic
Errors were encountered while processing:
 /var/cache/apt/archives/linux-firmware_1.157.17_all.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)

The fail state is always at 33% completed.

[close]

[mac]

You might Try...

Code: [Select]

sudo apt-get -f install

BTW how long do you let it stand at 33% before closing?

[kjl]

Tried to run clonezilla as thought might be a disk issue, now getting out of memory on startup.
Going to have to put this on the backburner for now until later in the week or weekend.
Will post on results but think I need a clean install.

[PCNetSpec]

dpkg-deb (subprocess): decompressing archive member: lzma error: compressed data is corrupt

You seem to have a corrupt package in the package cache.

Try clearing the package cache and reinstalling linux-firmware

Code: [Select]

sudo apt-get clean

then

Code: [Select]

sudo apt-get install --reinstall linux-firmware

The first of those commands will also free up disk space .. run it from a console if necessary.

[kjl]

The 33% ran about 10 to 15 minutes, then the error could not complete.
Most times I just let it run waiting for the output.

[PCNetSpec]

Try those commands.

[AndyInMokum]

Hi kjl, how's it going ?  I see you're having trouble encapsulating terminal outputs.  Try this the next time  .  After you've pasted the output to the forum editor.  Highlight the output by placing the mouse cursor at the beginning of the output.  Depress the left mouse button and hold.  Drag the cursor to the end of the output and release the left mouse button.  The output will now be highlighted.  In the forum editing options, not your keyboard option, select the # and left click on it.  This function is located above the  (Embarrassed) emoticon.   Your terminal output will now be encapsulated with the Code function.  I've done this for you this time.  I hope this helps  .

[kjl]

After running recovery a few times, managed to get to the desktop with no errors.
Ran both commands in terminal, first one had no output, second one;

Code: [Select]

Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  gir1.2-networkmanager-1.0 gir1.2-nma-1.0 libido3-0.1-0
Use 'sudo apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 7 not upgraded.