Choose style:

Author Topic: (SOLVED)No splash screen  (Read 1444 times)

0 Members and 1 Guest are viewing this topic.

Offline Peppermint Penguin

  • nOOb
  • *
  • Posts: 19
  • Karma: 3
  • New Forum User
    • View Profile
  • Peppermint version(s): Peppermint OS 7
(SOLVED)No splash screen
« on: July 27, 2017, 02:17:47 pm »
After installing Peppermint 8, I don't have a splash screen when I boot my computer.  The splash screen does show when I boot from the live USB.
« Last Edit: July 29, 2017, 11:03:06 am by Peppermint Penguin »

Offline murraymint

  • Trusted User
  • Veteran
  • *****
  • Posts: 1713
  • Karma: 288
  • soft boiled with a yolk of gold
    • View Profile
  • Peppermint version(s): 7, 8, 9
Re: No splash screen
« Reply #1 on: July 27, 2017, 02:44:38 pm »
It could be booting so fast that there's no time for the splash to show. How long does it take to boot?

Offline Peppermint Penguin

  • nOOb
  • *
  • Posts: 19
  • Karma: 3
  • New Forum User
    • View Profile
  • Peppermint version(s): Peppermint OS 7
Re: No splash screen
« Reply #2 on: July 27, 2017, 03:13:13 pm »
About 60 seconds or so.

Online PCNetSpec

  • Administrator
  • Hero
  • *****
  • Posts: 22202
  • Karma: 2477
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
  • Peppermint version(s): Peppermint 8R and 9
Re: (SOLVED)No splash screen
« Reply #3 on: July 29, 2017, 11:32:20 am »
If it's taking 60 seconds to boot, I'd expect it to show the plymouth splash screen

Can we have the output from:
Code: [Select]
inxi -Fz
and
Code: [Select]
dpkg -l | grep plymouth-theme
and
Code: [Select]
update-alternatives --display default.plymouth
WARNING: You are logged into reality as 'root' .. logging in as 'insane' is the only safe option.

Team Peppermint
PCNetSpec

Offline pin

  • Trusted User
  • Veteran
  • *****
  • Posts: 1272
  • Karma: 163
  • Peppermint - Void - NetBSD
    • View Profile
  • Peppermint version(s): Peppermint 7 Respin (64bit)
Re: (SOLVED)No splash screen
« Reply #4 on: August 04, 2017, 02:00:49 pm »
Hi everyone...
So, I was playing with Gobolinux distro on live USB, just to check it out. I wanted to see how they actually organized the file system, since they don't follow the usual unix system.

After this I'm also lacking the splash screen in my Peppermint 7?? I did system update and dist-upgrade followed by grub-update, still no splash screen :-\!
Here are the outputs from the commands suggested to Peppermint Penguin...

Code: [Select]
pedro@pedro-X540LA ~ $ inxi -Fz
System:    Host: pedro-X540LA Kernel: 4.4.0-89-generic x86_64 (64 bit) Desktop: N/A
           Distro: Peppermint Seven
Machine:   System: ASUSTeK (portable) product: X540LA v: 1.0
           Mobo: ASUSTeK model: X540LA v: 1.0
           Bios: American Megatrends v: X540LA.204 date: 03/14/2016
CPU:       Dual core Intel Core i3-5005U (-HT-MCP-) cache: 3072 KB
           clock speeds: max: 2000 MHz 1: 1900 MHz 2: 1045 MHz 3: 1899 MHz 4: 1900 MHz
Graphics:  Card: Intel Broadwell-U Integrated Graphics
           Display Server: X.Org 1.18.4 drivers: intel (unloaded: fbdev,vesa)
           Resolution: 1920x1080@60.05hz
           GLX Renderer: Mesa DRI Intel HD Graphics 5500 (Broadwell GT2)
           GLX Version: 3.0 Mesa 17.0.7
Audio:     Card-1 Intel Wildcat Point-LP High Definition Audio Controller
           driver: snd_hda_intel
           Card-2 Intel Broadwell-U Audio Controller driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture v: k4.4.0-89-generic
Network:   Card-1: Realtek RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
           driver: r8169
           IF: enp2s0f2 state: down mac: <filter>
           Card-2: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter driver: ath9k
           IF: wlp3s0 state: up mac: <filter>
Drives:    HDD Total Size: 128.0GB (11.6% used)
           ID-1: /dev/sda model: SanDisk_SD8SBAT1 size: 128.0GB
Partition: ID-1: / size: 111G used: 8.2G (8%) fs: ext4 dev: /dev/sda2
           ID-2: swap-1 size: 6.34GB used: 0.00GB (0%) fs: swap dev: /dev/sda3
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 38.0C mobo: N/A
           Fan Speeds (in rpm): cpu: 1900
Info:      Processes: 180 Uptime: 2 min Memory: 326.1/5869.3MB
           Client: Shell (bash) inxi: 2.2.35

pedro@pedro-X540LA ~ $ dpkg -l | grep plymouth-theme
ii  plymouth-theme-peppermint-7                 5.2.2                                        all          plymouth theme for Peppermint-7 (graphical theme).
ii  plymouth-theme-peppermint-7-spin            1.0.1                                        all          plymouth theme for Peppermint-7-Spin (graphical theme).
ii  plymouth-theme-peppermint-7-spin-text       1.0.1                                        all          plymouth theme for Peppermint-7-Spin (text theme).
ii  plymouth-theme-peppermint-7-text            5.2.2                                        all          plymouth theme for Peppermint-7 (text theme).
ii  plymouth-theme-ubuntu-text                  0.9.2-3ubuntu13.1                            amd64        boot animation, logger and I/O multiplexer - ubuntu text theme

pedro@pedro-X540LA ~ $ update-alternatives --display default.plymouth
default.plymouth - auto mode
  link best version is /usr/share/plymouth/themes/peppermint-7-spin/peppermint-7-spin.plymouth
  link currently points to /usr/share/plymouth/themes/peppermint-7-spin/peppermint-7-spin.plymouth
  link default.plymouth is /usr/share/plymouth/themes/default.plymouth
/usr/share/plymouth/themes/peppermint-7-spin/peppermint-7-spin.plymouth - priority 200
/usr/share/plymouth/themes/peppermint-7/peppermint-7.plymouth - priority 180

I can't find anything wrong!?
The system boots in 17sec and shutsdown in 7sec, so that's fine...
...just no splash screen on boot  :-\

EDIT: I do have a splash screen at shutdown.
« Last Edit: August 04, 2017, 02:06:53 pm by pin »

Online PCNetSpec

  • Administrator
  • Hero
  • *****
  • Posts: 22202
  • Karma: 2477
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
  • Peppermint version(s): Peppermint 8R and 9
Re: (SOLVED)No splash screen
« Reply #5 on: August 04, 2017, 02:54:01 pm »
in Peppermint run:
Code: [Select]
sudo update-initramfs -u
reboot to test.
WARNING: You are logged into reality as 'root' .. logging in as 'insane' is the only safe option.

Team Peppermint
PCNetSpec

Offline pin

  • Trusted User
  • Veteran
  • *****
  • Posts: 1272
  • Karma: 163
  • Peppermint - Void - NetBSD
    • View Profile
  • Peppermint version(s): Peppermint 7 Respin (64bit)
Re: (SOLVED)No splash screen
« Reply #6 on: August 04, 2017, 03:19:58 pm »
Nope!
Still no spash screen...

Thank you!
« Last Edit: August 05, 2017, 09:15:52 am by pin »

Offline pin

  • Trusted User
  • Veteran
  • *****
  • Posts: 1272
  • Karma: 163
  • Peppermint - Void - NetBSD
    • View Profile
  • Peppermint version(s): Peppermint 7 Respin (64bit)
Re: (SOLVED)No splash screen
« Reply #7 on: August 04, 2017, 06:30:34 pm »
Ok, just to let you know.
It has been a long evening here, watching Sense 8 on Netflix and after that some system cleaning.

I've rebooted my system five or six times during this cleaning and in two of those I was able to see the spash screen for a fraction of a second.

Still a bit strange, but the rest seems to behave normally.

Thanks for your help and have a good night!
« Last Edit: August 05, 2017, 09:26:26 am by pin »

Offline pin

  • Trusted User
  • Veteran
  • *****
  • Posts: 1272
  • Karma: 163
  • Peppermint - Void - NetBSD
    • View Profile
  • Peppermint version(s): Peppermint 7 Respin (64bit)
Re: (SOLVED)No splash screen
« Reply #8 on: August 05, 2017, 09:28:40 am »
This morning I went through the boot logs as well as the system logs, nothing there. Actually, I could even see that the spash screen is loaded according to the logs

Anyway, since I can't find anything there, I will consider my system to be in shape.

Thanks for the support.

Skickat från min SM-G900F via Tapatalk


Online PCNetSpec

  • Administrator
  • Hero
  • *****
  • Posts: 22202
  • Karma: 2477
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
  • Peppermint version(s): Peppermint 8R and 9
Re: (SOLVED)No splash screen
« Reply #9 on: August 06, 2017, 04:45:38 am »
I wonder if setting GRUB to the native resolution of your monitor would help ?
(I doubt it, but you never know)

Problems with the splash screen are 'normally' a graphics driver / mode switching issue .. but not one you usually see with Intel drivers :-\
« Last Edit: August 06, 2017, 04:51:39 am by PCNetSpec »
WARNING: You are logged into reality as 'root' .. logging in as 'insane' is the only safe option.

Team Peppermint
PCNetSpec

Offline pin

  • Trusted User
  • Veteran
  • *****
  • Posts: 1272
  • Karma: 163
  • Peppermint - Void - NetBSD
    • View Profile
  • Peppermint version(s): Peppermint 7 Respin (64bit)
Re: (SOLVED)No splash screen
« Reply #10 on: August 06, 2017, 06:06:15 am »
Thanks for your time and patience.
The thing is, that if I press Esc (the Shift key does nothing, I have to use Esc to enter the Grub menu) on booting followed by c for a command line and type

Code: [Select]
videoinfo

I can see that it is already set to the correct screen resolution i.e 1920x1080 in my case  :-\

Just in case you can see something that I can't here is the output of

Code: [Select]
sudo leafpad /etc/default/grub
Code: [Select]
# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
#   info -f grub -n 'Simple configuration'

GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

Once again thanks for your time!

Online PCNetSpec

  • Administrator
  • Hero
  • *****
  • Posts: 22202
  • Karma: 2477
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
  • Peppermint version(s): Peppermint 8R and 9
Re: (SOLVED)No splash screen
« Reply #11 on: August 06, 2017, 07:28:01 am »
Try changing this section
Code: [Select]
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
to
Code: [Select]
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
#GRUB_GFXMODE=640x480
GRUB_GFXMODE=1920x1080
then running:
Code: [Select]
sudo update-grub
you can always undo it by deleting that additional line and running 'sudo update-grub' again.

As I said I doubt if this'll make any difference .. but it might help by cutting out that one extra resolution mode switch.
« Last Edit: August 06, 2017, 07:31:34 am by PCNetSpec »
WARNING: You are logged into reality as 'root' .. logging in as 'insane' is the only safe option.

Team Peppermint
PCNetSpec

Offline pin

  • Trusted User
  • Veteran
  • *****
  • Posts: 1272
  • Karma: 163
  • Peppermint - Void - NetBSD
    • View Profile
  • Peppermint version(s): Peppermint 7 Respin (64bit)
Re: (SOLVED)No splash screen
« Reply #12 on: August 06, 2017, 08:19:06 am »
Well, as you hinted that made no difference. I still have a black screen until the lightdm prompt shows up...

As I said, the system is fully functional and there are no errors in the logs.
The strange thing is that before I had a splash screen and now I don't!

As I said, I wanted to have a look at Gobolinux to see how they have set-up the filesystem. They do not use for example /urs/bin or /etc, they give every program its own directory tree. It was just curiosity, but as you say... curiosity killed the cat...
Anyway, halfway through that I thought "what the hell", I can as well read all about it at the webpage. So, I forced shutdown and removed the USB... probably another mistake...
After this, I do not have a splash screen and can not find the reason for it.

Thank you!

by the way, while we are at it, i get this warning when updating Grub
Code: [Select]
Warning: Setting GRUB_TIMEOUT to a non-zero value when GRUB_HIDDEN_TIMEOUT is set is no longer supported.

looking closer... I do have
Code: [Select]
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=10
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
GRUB_CMDLINE_LINUX=""

Should I change this?
« Last Edit: August 06, 2017, 08:24:20 am by pin »

Online PCNetSpec

  • Administrator
  • Hero
  • *****
  • Posts: 22202
  • Karma: 2477
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
  • Peppermint version(s): Peppermint 8R and 9
Re: (SOLVED)No splash screen
« Reply #13 on: August 06, 2017, 09:06:50 am »
No that's a standard warning and nothing to worry about.

I can't see how installing gobolinux would affect the Peppermint splash screen...

The "starting up" (as opposed to the 'shutting down') plymouth splash screen is triggered by an inclusion in the initramfs .. I can't see how gobo would have modified the Peppermint initramfs .. and in any case we've already tried rebuilding it :-\

AND

It's not as though the plymouth theme is broken or it wouldn't be showing the 'shutting down' screen .. again :-\

Can you post the contents of:
Code: [Select]
pluma /boot/grub/grub.cfg
and
Code: [Select]
pluma /etc/fstab
and the output from:
Code: [Select]
sudo fdisk -l
and
Code: [Select]
sudo blkid
« Last Edit: August 06, 2017, 09:08:47 am by PCNetSpec »
WARNING: You are logged into reality as 'root' .. logging in as 'insane' is the only safe option.

Team Peppermint
PCNetSpec

Offline pin

  • Trusted User
  • Veteran
  • *****
  • Posts: 1272
  • Karma: 163
  • Peppermint - Void - NetBSD
    • View Profile
  • Peppermint version(s): Peppermint 7 Respin (64bit)
Re: (SOLVED)No splash screen
« Reply #14 on: August 06, 2017, 09:41:05 am »
Ok, here you go... have include systemd-analyze time as well. I think 18sec should be enough for the splash screen to show

Code: [Select]
pedro@pedro-X540LA ~ $ systemd-analyze time
Startup finished in 4.432s (firmware) + 4.478s (loader) + 2.144s (kernel) + 7.484s (userspace) = 18.540s

Code: [Select]
pedro@pedro-X540LA ~ $ pluma /boot/grub/grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
if [ "${next_entry}" ] ; then
   set default="${next_entry}"
   set next_entry=
   save_env next_entry
   set boot_once=true
else
   set default="0"
fi

if [ x"${feature_menuentry_id}" = xy ]; then
  menuentry_id_option="--id"
else
  menuentry_id_option=""
fi

export menuentry_id_option

if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}
function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
  if [ x$feature_all_video_module = xy ]; then
    insmod all_video
  else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
  fi
}

if [ x$feature_default_font_path = xy ] ; then
   font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
else
  search --no-floppy --fs-uuid --set=root bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
fi
    font="/usr/share/grub/unicode.pf2"
fi

if loadfont $font ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  set locale_dir=$prefix/locale
  set lang=en_US
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ] ; then
  set timeout=30
else
  if [ x$feature_timeout_style = xy ] ; then
    set timeout_style=hidden
    set timeout=0
  # Fallback hidden-timeout code in case the timeout_style feature is
  # unavailable.
  elif sleep --interruptible 0 ; then
    set timeout=0
  fi
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
else
  search --no-floppy --fs-uuid --set=root bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
fi
insmod png
if background_image /boot/grub/grub-background.png; then
  true
else
  set menu_color_normal=light-gray/black
  set menu_color_highlight=white/red
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
menuentry 'Peppermint GNU/Linux' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
else
  search --no-floppy --fs-uuid --set=root bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
fi
linux /boot/vmlinuz-4.4.0-89-generic.efi.signed root=UUID=bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4 ro  quiet splash $vt_handoff
initrd /boot/initrd.img-4.4.0-89-generic
}
submenu 'Advanced options for Peppermint GNU/Linux' $menuentry_id_option 'gnulinux-advanced-bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4' {
menuentry 'Peppermint GNU/Linux, with Linux 4.4.0-89-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-89-generic-advanced-bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
else
  search --no-floppy --fs-uuid --set=root bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
fi
echo 'Loading Linux 4.4.0-89-generic ...'
linux /boot/vmlinuz-4.4.0-89-generic.efi.signed root=UUID=bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4 ro  quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-89-generic
}
menuentry 'Peppermint GNU/Linux, with Linux 4.4.0-89-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-89-generic-init-upstart-bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
else
  search --no-floppy --fs-uuid --set=root bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
fi
echo 'Loading Linux 4.4.0-89-generic ...'
linux /boot/vmlinuz-4.4.0-89-generic.efi.signed root=UUID=bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4 ro  quiet splash $vt_handoff init=/sbin/upstart
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-89-generic
}
menuentry 'Peppermint GNU/Linux, with Linux 4.4.0-89-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-89-generic-recovery-bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
else
  search --no-floppy --fs-uuid --set=root bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
fi
echo 'Loading Linux 4.4.0-89-generic ...'
linux /boot/vmlinuz-4.4.0-89-generic.efi.signed root=UUID=bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-89-generic
}
menuentry 'Peppermint GNU/Linux, with Linux 4.4.0-87-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-87-generic-advanced-bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
else
  search --no-floppy --fs-uuid --set=root bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
fi
echo 'Loading Linux 4.4.0-87-generic ...'
linux /boot/vmlinuz-4.4.0-87-generic.efi.signed root=UUID=bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4 ro  quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-87-generic
}
menuentry 'Peppermint GNU/Linux, with Linux 4.4.0-87-generic (upstart)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-87-generic-init-upstart-bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4' {
recordfail
load_video
gfxmode $linux_gfx_mode
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
else
  search --no-floppy --fs-uuid --set=root bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
fi
echo 'Loading Linux 4.4.0-87-generic ...'
linux /boot/vmlinuz-4.4.0-87-generic.efi.signed root=UUID=bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4 ro  quiet splash $vt_handoff init=/sbin/upstart
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-87-generic
}
menuentry 'Peppermint GNU/Linux, with Linux 4.4.0-87-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-4.4.0-87-generic-recovery-bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4' {
recordfail
load_video
insmod gzio
if [ x$grub_platform = xxen ]; then insmod xzio; insmod lzopio; fi
insmod part_gpt
insmod ext2
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
  search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2  bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
else
  search --no-floppy --fs-uuid --set=root bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4
fi
echo 'Loading Linux 4.4.0-87-generic ...'
linux /boot/vmlinuz-4.4.0-87-generic.efi.signed root=UUID=bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-4.4.0-87-generic
}
}

### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###

### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
menuentry 'System setup' $menuentry_id_option 'uefi-firmware' {
fwsetup
}
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  ${config_directory}/custom.cfg ]; then
  source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

Code: [Select]
pedro@pedro-X540LA ~ $ pluma /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda2 during installation
UUID=bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4 /               ext4    noatime,errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=5C7D-EFC8  /boot/efi       vfat    umask=0077      0       1
# swap was on /dev/sda3 during installation
UUID=ea51ca6f-9b86-458e-a2d4-fc2b14aaeac8 none            swap    sw              0       0
/dev/disk/by-id/usb-Kingston_DataTraveler_3.0_60A44C3FACCEF120A96A0128-0:0-part2 / auto nosuid,nodev,nofail,noauto,x-gvfs-show 0 0
/dev/disk/by-id/usb-Kingston_DataTraveler_3.0_60A44C3FACCEF120A96A0128-0:0-part1 /mnt/usb-Kingston_DataTraveler_3.0_60A44C3FACCEF120A96A0128-0:0-part1 auto nosuid,nodev,nofail,noauto,x-gvfs-show 0 0
/dev/disk/by-id/usb-Kingston_DataTraveler_3.0_60A44C4138D8F120A97800AD-0:0-part1 /mnt/usb-Kingston_DataTraveler_3.0_60A44C4138D8F120A97800AD-0:0-part1 auto nosuid,nodev,nofail,noauto,x-gvfs-show 0 0

Code: [Select]
pedro@pedro-X540LA ~ $ sudo fdisk -l
[sudo] password for pedro:
Disk /dev/sda: 119,2 GiB, 128035676160 bytes, 250069680 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: A43F5429-787E-4AA2-8008-3D1E309198D7

Device         Start       End   Sectors   Size Type
/dev/sda1       2048   1050623   1048576   512M EFI System
/dev/sda2    1050624 237686783 236636160 112,9G Linux filesystem
/dev/sda3  237686784 250068991  12382208   5,9G Linux swap

Code: [Select]
pedro@pedro-X540LA ~ $ sudo blkid
/dev/sda1: UUID="5C7D-EFC8" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="86100ed6-a3de-44fd-9990-896148db2588"
/dev/sda2: UUID="bea6b4bc-e922-4a4a-ab42-fdaf5cea34c4" TYPE="ext4" PARTUUID="9a9e76fc-3d7e-4555-b791-39bb6eb23875"
/dev/sda3: UUID="ea51ca6f-9b86-458e-a2d4-fc2b14aaeac8" TYPE="swap" PARTUUID="4929b590-ee1a-463e-a21b-d7ce0b3c5bbc"
pedro@pedro-X540LA ~ $

Once again thank you for your time
« Last Edit: August 06, 2017, 12:55:39 pm by PCNetSpec, Reason: separated command output »