Author Topic: Dell Inspiron Mini 10 model 1011  (Read 2836 times)

Offline rjm65

  • Veteran
  • ****
  • Posts: 1035
  • Karma: 313
  • I have Peppermint Fresh Breath. :P
    • View Profile
  • Peppermint version(s): Win-98 /Win-7/ Peppermint 9
Dell Inspiron Mini 10 model 1011
« on: December 08, 2014, 08:24:54 am »
Dell Inspiron Mini 10 model 1011
Code: [Select]
inxi -F
System:    Host: dellmini1011-Inspiron-1011 Kernel: 3.13.0-40-generic i686 (32 bit) Desktop: N/A Distro: Peppermint Five
Machine:   System: Dell (portable) product: Inspiron 1011 version: A06
           Mobo: Dell model: CN0Y53 version: A06 Bios: Dell version: A06 date: 07/29/2009
CPU:       Single core Intel Atom CPU N270 (-HT-) cache: 512 KB flags: (nx pae sse sse2 sse3 ssse3)
           Clock Speeds: 1: 1596.104 MHz 2: 1596.104 MHz
Graphics:  Card: Intel Mobile 945GSE Express Integrated Graphics Controller
           X.Org: 1.15.1 drivers: intel (unloaded: fbdev,vesa) Resolution: 1024x600@60.0hz
           GLX Renderer: Mesa DRI Intel 945GME x86/MMX/SSE2 GLX Version: 1.4 Mesa 10.1.3
Audio:     Card: Intel NM10/ICH7 Family High Definition Audio Controller driver: snd_hda_intel
           Sound: Advanced Linux Sound Architecture ver: k3.13.0-40-generic
Network:   Card-1: Broadcom BCM4312 802.11b/g LP-PHY driver: b43-pci-bridge
           IF: wlan0 state: up mac: 0c:ee:e6:d0:cd:42
           Card-2: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller driver: r8169
           IF: eth0 state: down mac: 00:24:e8:ed:ca:13
Drives:    HDD Total Size: 161.1GB (2.2% used) 1: id: /dev/sda model: ST9160314AS size: 160.0GB
           2: USB id: /dev/sdb model: DataTraveler_2.0 size: 1.0GB
Partition: ID: / size: 146G used: 3.0G (3%) fs: ext4 ID: swap-1 size: 1.06GB used: 0.00GB (0%) fs: swap
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 45.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 118 Uptime: 7 min Memory: 133.0/992.8MB Client: Shell (bash) inxi: 1.9.17
I had linux mint 17 on this machine and chose to wipe it out this morning with a fresh pep 5 install...
mint was so slow it was running worse then xp did...
I think it has to do with the ram only having 1 gig, my asus eeepc has the 2 gig ram and the same processor....
mint first booted using 220 megs ram after tweaking i got it down to only 195 megs ram...
Pep 5 booted up first time using 126 megs ram after a few tweaks removing light locker and setting and removing bluetooth and btfrs tools it is booting at 115 megs
I would like to do 2 more tweaks on it yet removing any samba and cups programs for they will not be used on this machine all it will be used for is to surf the web...
Robert
Peppermint 9 User

Gateway Solo 9300 Pro
IBM T40

Offline 10i

  • Trusted User
  • Member
  • *****
  • Posts: 496
  • Karma: 148
  • Peppermint Enthusiast
    • View Profile
    • My Peppermint Blog
  • Peppermint version(s): Peppermint 10 - 64 bit
Re: Dell Inspiron Mini 10 model 1011
« Reply #1 on: December 08, 2014, 08:30:18 am »
Sounds great, glad it runs better now.
Peppermint user since Fire / Ice

View my Linux blog:  http://myiceadventure.blogspot.com

Offline mgb_driver

  • Newly Subscribed
  • *
  • Posts: 17
  • Karma: 0
  • New Forum User
    • View Profile
  • Peppermint version(s): OS 5
Re: Dell Inspiron Mini 10 model 1011
« Reply #2 on: February 23, 2015, 05:52:50 pm »
I have this same netbook but with 2G RAM. Peppermint OS 5 really runs well on this. Much faster than XP. No crashes. Battery life may be somewhat less than on XP but it is not a problem.  The memory upgrade is a real pain as you have to disassemble almost the entire netbook.  I probably wouldn't have bothered to upgrade but the OEM memory card failed. So in went 2G.


Offline PCNetSpec

  • Administrator
  • Hero
  • *****
  • Posts: 26452
  • Karma: 65531
  • "-rw-rw-rw-" .. The Number Of The Beast
    • View Profile
    • PCNetSpec
  • Peppermint version(s): Peppermint 10
Re: Dell Inspiron Mini 10 model 1011
« Reply #3 on: February 24, 2015, 02:41:54 am »
You should try installing the TLP power manager .. see Stage 10 here:
http://forum.peppermintos.com/index.php/topic,760.msg6465.html#msg6465
WARNING: You are logged into reality as 'root' .. logging in as 'insane' is the only safe option.

Team Peppermint
PCNetSpec